I have some blocks which were overruled. Now I would like in properties palettes show some thing else instead of" block reference " for those overruled objects. Is it possible ?
View 4 RepliesA user showed me today that she cannot see any properties for a wall, door, or other AEC object in the Properties palette.
Some options like height, width, etc. are shown, but not layer, style, etc. from the General portion of the Basic tab.
Is this going to be a reinstall scenario or is there a fix for this?
Say I have a block which contains just a line inside. I overruled that block to show a circle. I have this overruled explode class, so whenever user at command pormpt explode that entity it would be exploded as a circle.
My problem is when I explode the block within code ( Myblockref.Eplode(dbobjects) ) . it will bring the line.
as the subject states, at some point (I believe after uninstalling autodesk 360), our properties tool pallete will not populate info for the selected object. is there a fix other than re-installing from scratch? The installation fixer didn't work, and I've had to re-install twice now for other issues with the software, so it's getting very costly/time consuming to just re-install for these problems.
View 9 Replies View RelatedJust starting to use 2014, and so far not so good. I tend to keep the Properties Palette open and docked. In 2014, if my current layer is 0, any object I select in a drawing shows as Layer 0 in the Design tab of the Properties palette. If I change to a different layer, any object selected shows that layer in the Properties palette. If I start a new drawing, enter WALLADD and draw a wall segment, the A-WALL layer now correctly appears in the Layer Manager, but when I select the wall, the Layer in Properties is the current layer, not the A-WALL layer it should have gone on. Also, Quick Properties is on, but doesn't pop up anywhere.
View 5 Replies View RelatedIs it possible to add the Properties Palette to a custom made palette set in .NET? And how to do this?
View 3 Replies View RelatedWalls are being created on layer A-Wall, in color Cyan, Lineweight .020, etc. I'd like to edit those layer properties. There must be a matrix somewhere that shows a list of all of the Architectural Objects, the layer that each object will be created on, and the properties of those layers. Where in ACA2008 have they hidden this top-secret matrix? I've accessed Layer Key Styles via about 6 different routes, and nowhere do I find a list of Objects. I see that I could define an override for every component of a Wall object in the Style Manager / Display Properties, but it sure would be easier to just change the layer color once, wherever that's defined. There is only one Layer Key Style accessible through Style Manager, and layer A-Wall doesn't appear in that manager- layers A-Wall-Abov, A-Wall-Blow, etc appear, but not A-Wall. Neither does layer A-Glaz, which is where Window objects are placed.
How does a Wall object know to place itself on layer A-Wall, and where are the properties of layer A-Wall defined?
I cannot change the color of any object in any drawing file from the properties manager or color command. I can change the color through the layer manager by assigning a new color to that layer, but cannot override the ByLayer and ByBlock settings with the object properties. The color drop down is simply grayed out. I am using Autocad lt 2006.
View 7 Replies View RelatedI have a BLOCK, contains object & Blocks, that Blocks also contains objects and blocks and so on..
ex.
BLOCK
|
|—Objects
|—Block|
When I pick the properties command sometimes the box comes up blank and the "Esc" key has to be pressed to bring up the box. When the box does come up the properties of a picked object does show and you cannot change the properties of the picked object. I am runnung AutoCadLT 2014.
View 7 Replies View Relatedthe properties palette started only showing the current properites for the drawing and not the properties of the entity selected. what causes this i am using autocad civil 3d 2013.
View 9 Replies View RelatedSomehow the Properties Palette has gotten less wide- such that I can't read teh actual properties. Previously I was able to make it wider just by hovering over it, clicking on an arrow and dragging it wider. Not now.
View 1 Replies View RelatedIt's not just the layer that isn't being displayed in the Properties Palette. My 2014 Properties Palette isn't contextual--displays only the general info--none of the object specific information.
View 2 Replies View RelatedI recently had to reinstall my AutoCAD LT 2008 and now when I open the properties palette to make adjustments to dimensions and fine tune, many peramiters that used to be visible are no longer there and accessible. I used to be able to adjust the dimscale as needed in the properties window, but can't now. How do I get it back?
View 7 Replies View RelatedIs there a way to select a number if not all objects in a drawing and then change the properties (specifically color) from the command line i.e. without a dialog window?
Custom Build with Win7 Pro 64Bit SP1
Gigabyte Tecohnology Co. X79-UD3
3.60 gigahertz Intel Core i7-3820
16GB GSkill Ripjaw Z PC3 2133 PC17000
PCI-E ATI FirePro V7800 2GB 256bit
ATA SanDisk SDSSDX24 SCSI Disk Device (256 GB)
Dell 2001FP and (2) 2407WFPHC Triple monitor setup
Question - Are you the Common Denominator?
Under the Display tab the Display Properties for an object is dimmed. Why is that?
View 2 Replies View RelatedIs there a tool out there that will allow me to pick an object and change it's layer properties?
View 9 Replies View RelatedI got a simple question about the creation of copies of an object. Is it possible to have the objects in the mirroring of an object change with the object used as reference for mirroring?
If there is no function to do this directly is there a way to do it via Ilogics to update the mirrored objects? If possible even by deleting and creating a new the mirroring yet not manually but by i logic?
- 2500K @ 4.2Ghz- 8GB - Radeon7970 -
- Xeon 1230V2 @ stock Ghz- 32GB - Quadro 2000 -
When I select any object, my quick properties tab is blank and my properties tab doesn't register anything. Also, I get an error message when I go into my CUI to try to modify the quick properties tab. Pretty frustrating. I've attached a couple of images for reference. I've repaired, re-installed and unistalled and re-installed and still have the same probelm.
Dell Precision T3500
Intel(R) Xeon(R) CPU W3530 @2.8GHz
ATI FIrePRo V5800 (FireGL V)
12 GB Ram
64 BIt OS
I recently upgraded from LT2013 to LT2014. I never had any issues with 2013, but now seem to be battling with 2014. My OS is Windows 7 Home edition.
When selecting an object and then clicking the properties menu, the properties of the selected object are not displayed, but instead the properties of the selected layer are shown.
In the attached screenshot:
1) My active layer is "AM_VIEWS".
2) The layer of the object that is selected is "MEDIUM".
3) The properties dialog box shows the properties of my active layer and not the selected object.
I am therefore unable to override any settings of the selected object and manually change settings e.g. Linetype, Linetype scale etc.
Installed Map 3D 2013 this week. Have been using it with no problems for a few days.
I occasionally turn the properties palette on/off. Now I cannot get it to appear at all.
I'm working in AutoCAD Map 3D 2014, just upgraded in fact. I'm working with older drawings that had their text added by a trained chimp in simple text (Command: TEXT as near as I can figure). In updating these specification drawings, I'm making fonts the same size, updating material lists, correcting typos and just generally wiping off the banana chunks and drool.
Unfortunately, the properties palette no longer populates with all the text info like it did back in my 2010 version. In fact, the displayed values won't actually change when I select ANYTHING. Except it does go blank if I select something and then hit Ctrl 1 to get the palette.
I've hunted through Customize Palettes and Options under the Tools Menu (Map Classic workspace customized).
I am writing in the process of writing a AutoCAD/Civil3D plug-in (in VB.Net) product that needs current detects all of the updates (modified, erased , Unmodified, etc) on my own Entities and then only act on these once. So to this end I am maintaining a list of the affect entities and then processing the 'queue' on Document.CommandEnded.
This worked perfectly for me until I realized that the Properties Palette (and probably others) do not actually perform a command so the command end event is never caught. Obviously the queue will be processed on the next command but it looks sloppy that my data is not updated straight away.
I have seen various blog posts and a similar post on here that suggest using DocumentManager.DocumentLockModeWillChange or Editor.EnteringQuiescentState as the event to detect the end of the edit. However I am finding that no matter which of there I use I am unable to apply my Document Lock and this leads to Access Violations no matter what checks I do passed on the EventArgs.
I believe I have all the right Document locks in place, all in Using Statements so they should be disposed of correctly.
How can you remove or add a tab to the properties palette? I somehow have an extra Display tab on my properties palette and I can't find a way to remove it.
View 1 Replies View RelatedPossible to add custom fields to an AutoCAD object and be able to view those fields and contens in the extended data tab on the properties palette?
If it's not possible with VBA is it possible with .NET?
Question of curiosity. The Properties Palette in C3D 2012 has four tabs: Design, Display, Extended Data, and Object Class. The Design tab obviously has a lot of valuable information and allows you to edit and manipulate entities within the program. But do the other tabs really have much value?
OK, it seems that there may be times when the Extended Data tab is of use as you can associate hyperlinks, notes, and documents with an drawing object; so I can buy into that. Are there folks finding those features to be useful?
Now I don't know about the Display and Object Class tabs. Whenever I select an item, and happen to check these tabs out, there just doesn't seem to be any useful information. Perhaps I am not selecting the right types of objects. If they are not listing any valuable information, why are they so prominent instead of being buried deep somewhere. Any insight into the usefulness of the two tabs?,
AutoCAD Architecture 2009 - Something new started today!!! Working in either design or construction workspace the Properties tool bar will not operate. When I select an object and roll over to the Properties Pallette it simply starts to blink and does not open. Also, the Quick Properties panel will not open. Background, the new file I am working on was last saved on my laptop and transfered via a thumb drive. I have done this often with out a problem. However, the laptop is a new one with Windows 7 and my desktop has Windows XP.
View 1 Replies View RelatedI'm having a problem with my properties window or floating palette. When I select an object, such as a "line", my properties palette refreshes itself for about 3 seconds. When I hit esc, or deselect the line, it takes another 3 seconds to refresh itself. You can even see the properties palette start at the top and go blank as it travels downward. Very slow process, I can not get anything done. IF I close my properties palette, it does not have the delay, but I can not work without it. When I reboot, it works fine for about 5-6 selections, then jams back up.
ACA 2012 sp1 with Win 7 Pro 64bit sp1
Intel i7 hex 3.0
16 gb ram
Nvidia Quadro 4000
i got one problem with properties palette. that is when i select line in the drawing, it display no selection in the properties palette. but display other objects except lines.
View 5 Replies View RelatedI've created a VB.NET routine to update blocks, layers and layer filters from a source drawing.
After updating filters and when the command is finished (dialog closed), the Layer Properties Manager palette MAY not update to show the new set of filters although visually you can see that it does appear to refresh itself.
Whether it updates seems to depend on which filter is active and which filters are added.For example, I have properties filters A, B, C, D and E, and B and E have subfilters B1-B8 and E1-E9.
If Filter E3 is removed as a test and the parent filter E is active, when the command is done, E3 should appear back in the list, but it does not show until the palette is closed and reopened. If filter B is active, then the list will refresh and E3 will show immediatlely after the command exits.
I have added a dialog to my routine to inform the user they may have to close the palette and reopen to get the proper display.
I have tried Editor.UpdateScreen() but that does not work.
What setting would cause a huge, well about 5-second, delay when any entity is selected without a command active and only with the Properties Palette on-screen but autohidden? If command is given first, verb-noun, no hesitation after selecting at Select Objects: prompt. But, selecting any entity first, noun-verb, causes the 5-second delay before the mouse is again active. Very annoying. Closing the Properties Palette completely seems to cure the delay problem, but at a different cost in editing time. The workstation is running WinXP Pro with 4 gigs of ram.
View 9 Replies View Related