Is there a way to move the horizontal text of a vertical dimension that's outside of the extension lines to the right or left?
This was possible years ago with a simple stretch or moving of the text grip. Now, if the dimension is above the extension lines, the text is to the right. If it is below the extension lines, the text is to the left.
I just went from AutoCAD 2011 to 2012.
I move dims manually around quite often.
In 2011 I could select dim, Right click, Type "X" to bring up the move dim sub menu, Then either "M" to move dim alone or "L" to move it with a leader.
I can't seem to do that in 2012. I have to hover the mouse over the dim text grip point and wait for a menu to pop-up.
Obviously the former is way faster and I would like that back.
Also on a side note, I'm noticing 2012 to be ever so slightly slower. Micro second delays here and there. Extremely annoying when you're used to instant commands. Biggest culprit seems to be the move command. It hangs for a split second when I invoke the command. (and no I don't have properties up). Is this something I just need to get used too?
One of my dimension scales doesn't draw a line back to the dimension when I move the number away from the dimension line. All my other dimensions do it. I keep looking for the setting that must be changed but I cannot find it. What setting creates a line from the dimension number back to the center of the dimension line if you pull the dimension number away from the line?
View 4 Replies View Related(Again) The “leader” of the “dimension text” disappears when the text is moved! Why?
I’m wondering why the “leader” of the “dimension text” disappears when the text is moved.
How can I control this setting?
I need to show this “leader” all the time. Is that possible?
Please, have a look on the screenshots below (the file is attached).
All of a sudden this morning when I dimension something, my dimension text is upside down. It is only on one drawing and only on new dimensions. why nad how to correct?
View 3 Replies View RelatedHow do I edit a dimension text to add a second line (so dimension on top of the line and text on the second line)?
View 3 Replies View RelatedSame drawing (attached) with identical settings printed on one PC using DWG to PDF - creates this:
on another PC this:
So, some angle and aligned length dimensions are mirrored.
PDF previewed with Adobe Reader and Foxit PDF reader.
File is created and printed in 2010 LT, hence no UCS rotation, text style and print settings unaltered.
I have a problem to edit the dimension with autocad 2012. When i try to double click on the dimension text, i have a error message. This command doesn't exit.
View 3 Replies View Relatedwhy my dimstyle appears different when I use different versions of AutoCAD.
In LT it is correct (left hand image), both styles are STANDARD font but in the full version (right hand image) the suffix text style is ROMANS.
I lost my dimension text on all my drawings when I converted with Windows 7. I did reload the 2010 software from scratch. I am thinking it is some type of .dll file issue or font issue.
View 9 Replies View RelatedHow to draw this object?
I want to draw an object similar to the dimension that contains two arrowheads with TWO “text dimension” to indicate the range each “steel bar” covers. This is important to indicate the range the two bars cover with the same dimension object.
Have a look on the screenshot below . The file is attached.
know if there a way to use fields in a table to pull the measurements out of dimensions snapped in a drawing (or layout) and place them in that table.
I create framing drawings and am looking for a quick way to put together a cut list without having to manually type dimensions into a table.
I have a rather weird problem. I am using .dxf files as digital overlays on a new optical comparator we recently purchased. The problem is, the cad files we used to create our old mylar overlays is both 3d and comprised of text/curves/dimensions. I figured out the flattening and turning the text into lines and curves, but I cannot find a method to change the dimension graphics (profile boxes, length dimensions, and angle dimensions) into lines and curves.
When I import them into the comparator program only the lines and curves can be displayed on the comparator. Is there any way to flatten and make all of the dimension graphics lines and curves?
I am using AutoCad 2012, with CADDUCT. On my runs of duct that go vertical, I like to stack my tag numbers beside the riser in order, so our installers can easily identify the order without a ton of section views. I am trying to figure out a macro that will do numerous things. Since my tags come out at different rotation angles, I would like to do the following commands.
Rotate object text "TAG #" to 0 degrees
move object text "TAG #" to "Snap from" & "snap insert" 6" below the tag above it
I want the numbers to align by their insert locations up and down the page, and exactly 6" on center vertically from one another. The tag numbers have a node justified to the center up and down of the text.
If I place a dimension and have text above and below the dimension line (using X), and then grip edit the dimension text to move it for space/clarity on plans, the text above and below the line will mysteriously move closer to the line. If I have backgrounds applied to the text, which I normally do, the backgrounds will cover the line. Even without the background, it looks odd next to other dimensions that were not grip edited.
Civil 3D 2011
Windows 7 x64
I'm trying to get the dimension text that I pull out to the side closer to the actual dimension marks. The 2 1/2" and 2" shown have a minimum distance they can get toward their dimensions. I would like it to be about half of what it is, but so far I haven't been able to find the property that changes that.
View 3 Replies View RelatedCan i change the length of the dimension line 'extension' when my dimension text placement is beside the dimension line (see attached image)?dim line length.jpg
View 6 Replies View Relatedevery one now a day i am making isometric drawings so i m little bit confuse in that i am using dimension and change the oblige angle text of dimension so is it right way or not ????
View 9 Replies View RelatedWhen doing an angle dimension and trying to put text under the dimension line, the text types out straight which if long enough will extend over the dimension line. Other then creating text with arctext, is there no other way to get it curved? I am using AutoCAD 2010.
View 3 Replies View Relatedi found the problem of dimension when moving the whole object inclusive the dimension to any direction.
View 2 Replies View Relatedmy normal dimension style has text above dmension line & I want to add 'typical' to it below dimension line.
I have done this lot of time in my previous job an year back. but I can't seem to remember what to type between dimension text & the word I want to add in edit text box, so that it appers below dimension line.
is it possible to have a dimension style setup that shows the dimension text inline with the dimension - without having to move it?I have been looking but cannot seem to do it - is it possible and I am just missing it?
View 1 Replies View RelatedMy office has two desktop printers, both HP. Our Officejet 7000 wide format prints great. On the HP Officejet 7500, we are often seeing text printing errors. It will not print the text from vertical dimension strings, and cuts off some M-text at an imaginary vertical line in the middle of the text box. PDF's of the same drawing look fine. Is this a printer driver issue? Is there anything I can do within AutoCAD?
View 3 Replies View RelatedI am having problems with changing the height of the dimension text. I have tried going into the style editor and changing the text height in there and then saving it. The number for the height that I changed stays saved however the actual text height on the drawing does not, not even after I tell it to update.
View 3 Replies View RelatedWe have detail drawings that contain horizontal and vertical dimensions. They're drawn at full scale in model space and saved as individual drawings. We then insert them as blocks onto a sheet in paper space, scaling them down to 1/2", 1/4" scale ETC.
Here's the problem - all the vertical dimension text appears bolder than everything else when scaled down. Horizontal text is just fine, diagonal text also looks a little bolder though.
When i mark Text/Dimension/Multileader and such in autocad 2011 LT, i get an issue, which i have tried to shown on the picture.The problem is that when i mark them, they show the current size they have, plus any other size they have had (Annotation it seems).
I Make a dimension. The overall annotation scale is 1:10. Now i change the overall annotation scale to 1:100. Then i set the overall annotation scale back to 1:10, i click my dimension, and it now shows how it currently looks, plus how it looked when the annotation scale was 1:100. This way i end up with every text object showing up 5 times when i mark them.
Home and work computers act differently when I initiate the dimension text edit command. One moves both the text and the dimension lines and the other only moves the text. It doesn't appear to be the dimstyle so I am wondering if it is a setvar.
View 2 Replies View RelatedIs it possible to change the dimension style somehow, such that it adds 3 units (in this case inches).I have a client that wants the neat length of the pipe given above the dimension line, and the length with extra sock below the dimension line.
View 4 Replies View Relatedi'm having some problem when I preview my drawings for printing. When i'm zooming in the drawings in the paper space, the text and dimension text become invisible but when i zoom it out again, that the drawings become a bit smaller, i can see the text. by the way i'm using Vista as my OS.
View 6 Replies View RelatedIn AutoCAD 2012 My dimension style/scale seems to change automatically. I'll add one dimension in paper space,and then the very next dimension will be in a different style. It will say 30" one time, then 400" the next. Seems like it picks its own scale randomly. It happens with the default dim styles as well as custom styles.
View 9 Replies View RelatedI am working with a point cloud and want a dimension that will call out the Z value of a selected node. Is there a way to adjust an ordinate dimension to report the Z value instead of Y? If not, is there another way to do this?
View 4 Replies View Related