AutoCAD 2010 :: Use Fields In A Table To Pull Dimension Text For Cut Lists

Jun 18, 2010

know if there a way to use fields in a table to pull the measurements out of dimensions snapped in a drawing (or layout) and place them in that table.

I create framing drawings and am looking for a quick way to put together a cut list without having to manually type dimensions into a table.

View 4 Replies


ADVERTISEMENT

AutoCad 2D :: Get Dimension Text That Pull Out To Side Closer To Actual Dimension Marks?

Jun 2, 2011

I'm trying to get the dimension text that I pull out to the side closer to the actual dimension marks. The 2 1/2" and 2" shown have a minimum distance they can get toward their dimensions. I would like it to be about half of what it is, but so far I haven't been able to find the property that changes that.

View 3 Replies View Related

AutoCAD 2010 :: Link Text Fields Between Layouts In Same DWG?

Feb 27, 2013

Can i link several text fields to different layouts in the same DWG? I need to change the same information into several layouts, and it`s taking me too much time to do that.

eg: if i have a field "Smith" in Layout 1, 2, 3, 4 (linked between them) and i want to change from Smith to Johnson , if i change it in Layout 1, it will automatically change it in all Layouts.

View 2 Replies View Related

AutoCad :: Export Text / Dimension / Leaders And Table Styles?

Aug 22, 2011

I was wondering is there a way to export text, dimension, leaders and table styles? I have been trying for a while but can figure it out not even sure that you can.

View 5 Replies View Related

AutoCAD Civil 3D :: Structure Table That Lists Both Existing Surface Elevation And Proposed

Mar 5, 2012

So we have to adjust the elevation of hundreds of drainage structures from their existing elevation to the new finished ground elevation.I know we can give this information within the structure label by adding a reference surface but we would like to produce a table with three columns:

Structure No.      Existing Rim Elev.      Proposed Rim Elev.

How to produce such a table?

View 6 Replies View Related

AutoCAD Inventor :: ILogic To Pull Value From Extrusion Dimension Without Rename

May 30, 2013

I am trying to find a way to have iLogic code that looks at a part with only one extrusion, such as bar stock or angle stock and automatically export the length to iProperties. As per the request of the other engineers however, this code cannot be based on a common renamed parameter. Also, since no one draws things the same exact way, it can't be based off of a common dimension parameter either. At least not in terms of d0,d1..etc. 

Is there such thing as a code similar to variable=standard.extrusionextentslength that I can imbed within an if then that would pull this information from the model?

View 4 Replies View Related

AutoCad :: How To Export Table With Some Fields To Excel

Feb 24, 2012

I have a table with some Field, how can I export it to Excel? I have tried to export it to .CSV but the Formula has gone .

View 9 Replies View Related

AutoCAD 2010 :: When Text Is Moved Leader Of Dimension Text Disappears

Feb 13, 2012

(Again) The “leader” of the “dimension text” disappears when the text is moved! Why?

I’m wondering why the “leader” of the “dimension text” disappears when the text is moved.

How can I control this setting?

I need to show this “leader” all the time. Is that possible?

Please, have a look on the screenshots below (the file is attached).

View 1 Replies View Related

AutoCAD Map 3D :: Adding Fields To Existing Shp File Table?

Jan 7, 2010

how to add more fields to the dbf file of a shp (using AutoCAD Map 2010), other than calculation fields? I am often working on a shp and get asked to add more fileds to hold more data but cannot find a way to do in in AutoCAD (have to resort back to Arcview: but then that causes issues when I go back to the original CAD file that has the data connected to it).

View 7 Replies View Related

AutoCAD 2010 :: Importing Of Text As Table?

Mar 28, 2012

i Have the dwg drawing in which a table is made by simling joining the lines & putting the text in those line.Can that data in actual be converted into the table?

View 1 Replies View Related

AutoCAD 2010 :: Table Cell Text

Jul 29, 2009

I am currently using 2008. I have data linked an excel sheet to a table in my drawing. That part works fine.I am trying to link cell values in that table to block attributes using fields-object-formula-cell.Numeric values transfer to my field OK but values containing letters or full words transfer as #####.This appears to be the 'way it is' in 2008.

View 7 Replies View Related

AutoCAD Inventor :: Hole Table On Another Sheet And Fields In Title Block

Jul 14, 2013

I moved the hole table from the original sheet to an other, but the fields in the title block of the new sheet don't update with the iproperties of the model

View 1 Replies View Related

AutoCAD 2010 :: Editing Text In Table Cells

Mar 7, 2012

I've started having problems when trying to edit text in table cells. Sometimes I double click and all is ok. Sometimes it wont let me select anything in the cell. Sometimes I have to select the cell, then right click to edit text. I get this message:

Command: Specify opposite corner:
Invalid window specification.
Specify opposite corner: Specify opposite corner:

Is this likely to be a hardwear issue, and the pc is struggling to run AC correctly with all the other crap my company has running in the background? Or is there a systems setting that may have been changed, for whatever reason?

View 4 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Edit A Table Where Cells Are Populated With Fields

Aug 29, 2013

I've been up and down the forums looking for some direction or programming code for this to no avail.

What I'd like to do is edit a table where the cells are populated with fields.  I'd like to copy the last row of the table to a new row (fields and all), then change the fields of the row I copied FROM to text, and lock those cells.

I'd like to copy this row including the fields to a new row beneath it.  Then edit the cells of the first row to change the fields to text, and then finally lock the cells of the first row so that only the new row would update when the field properties change.  Eventually they will be populated with data from the Vault..

View 6 Replies View Related

AutoCAD 2010 :: Dimension Text Upside Down?

Aug 17, 2011

All of a sudden this morning when I dimension something, my dimension text is upside down. It is only on one drawing and only on new dimensions. why nad how to correct?

View 3 Replies View Related

AutoCAD 2010 :: Moving Dimension Text

Mar 30, 2012

Is there a way to move the horizontal text of a vertical dimension that's outside of the extension lines to the right or left?

This was possible years ago with a simple stretch or moving of the text grip. Now, if the dimension is above the extension lines, the text is to the right. If it is below the extension lines, the text is to the left.

View 3 Replies View Related

AutoCAD 2010 :: Second Line Of Dimension Text?

Mar 4, 2013

How do I edit a dimension text to add a second line (so dimension on top of the line and text on the second line)?

View 3 Replies View Related

AutoCAD Inventor :: Creating Cut Lists Or Sorted Material Lists

Mar 6, 2013

This morning the shop brought back a set of drawings and requested that I provide a cut list for the fab department. Our drawings consist of an assembly drawing and materials list on the first page with several individual parts on each of the following pages. I am looking at including a column in the ML for the operation ( laser, saw, shear) and sorting the list by it. However when I do this the Item Numbers on the list are all confused. If a person were to look at a balloon on a drawing and then attempt to find it in the list it would be difficult and time waster.

The questions.

1. Is there a way to renumber the item list after sorting the material?

2. If I place an assembly view off the edge of the sheet for each of the following sheets and then place a materials list on each sheet, is it possible to create a plugin that would find which parts are on the sheet and hide all the other parts on the list? I have just started going through the "my first plugin" tutorial and this sounds like a place where it should be useful but I don't know which tags I need to look for.

View 7 Replies View Related

AutoCAD 2010 :: Mirrored Dimension Text When Plotted To PDF?

Oct 15, 2013

Same drawing (attached) with identical settings printed on one PC using DWG to PDF - creates this:

on another PC this:

So, some angle and aligned length dimensions are mirrored.

PDF previewed with Adobe Reader and Foxit PDF reader.

File is created and printed in 2010 LT, hence no UCS rotation, text style and print settings unaltered.

View 5 Replies View Related

AutoCAD 2010 :: Dimension - Unable To Edit Text

Jan 25, 2012

I have a problem to edit the dimension with autocad 2012. When i try to double click on the dimension text, i have a error message. This command doesn't exit. 

View 3 Replies View Related

AutoCAD 2010 :: Different Text Styles Using Dimension Suffix

Sep 16, 2013

why my dimstyle appears different when I use different versions of AutoCAD.

In LT it is correct (left hand image), both styles are STANDARD font but in the full version (right hand image) the suffix text style is ROMANS.

View 6 Replies View Related

AutoCAD 2010 :: Lost Dimension Text When Converting To Windows 7

Jul 27, 2012

I lost my dimension text on all my drawings when I converted with Windows 7.  I did reload the 2010 software from scratch.  I am thinking it is some type of .dll file issue or font issue. 

View 9 Replies View Related

AutoCAD 2010 :: How To Draw Object With Two Arrowheads / Text Dimension

Mar 14, 2012

How to draw this object?

I want to draw an object similar to the dimension that contains two arrowheads with TWO “text dimension” to indicate the range each “steel bar” covers. This is important to indicate the range the two bars cover with the same dimension object.

Have a look on the screenshot below . The file is attached.

View 5 Replies View Related

AutoCAD 2010 :: Turn Dimension Text / Graphics Into Lines And Curves

Oct 29, 2012

I have a rather weird problem. I am using .dxf files as digital overlays on a new optical comparator we recently purchased. The problem is, the cad files we used to create our old mylar overlays is both 3d and comprised of text/curves/dimensions. I figured out the flattening and turning the text into lines and curves, but I cannot find a method to change the dimension graphics (profile boxes, length dimensions, and angle dimensions) into lines and curves.

When I import them into the comparator program only the lines and curves can be displayed on the comparator. Is there any way to flatten and make all of the dimension graphics lines and curves?

View 9 Replies View Related

AutoCAD 2010 :: Dimension Text Grip Edit Reduces Line Spacing?

Jun 27, 2011

If I place a dimension and have text above and below the dimension line (using X), and then grip edit the dimension text to move it for space/clarity on plans, the text above and below the line will mysteriously move closer to the line.  If I have backgrounds applied to the text, which I normally do, the backgrounds will cover the line. Even without the background, it looks odd next to other dimensions that were not grip edited.

Civil 3D 2011
Windows 7 x64

View 1 Replies View Related

AutoCAD 2010 :: Where Is The Status Bar Pull Down

Nov 16, 2010

I just installed 2011 and was in the process of setting up my workspace when I realized i could not find the Status Bar pull down on the View Tab/Windows Panel. Help still says it is there. When I went into the CUI I could not find the command or even the icon. I know that you can right click and edit the status bar buttons but you can only do them one at a time and then you have to right click again to get rid or add the next button and then right click again....the drop down, available in the last several releases enabled you to just check them on or off all at one time.

View 9 Replies View Related

AutoCAD 2010 :: Layer Pull-down Display

Mar 5, 2012

I have a question on the display of the layers in the layer-pulldown. I have a client that is having problems with the display of his layers in the pull-down. They are not in alpha order. When he opened the dialog box they are listed correctly - what can cause this?

View 4 Replies View Related

AutoCAD 2010 :: Explode Excel Table But Keep Table-layout And Texts

Mar 14, 2013

In our company, we put Excel tables in our drawings. The reason we've chosen for Excel-tables is that we can adjust the layout of the table quite easily. These tables consist of grouped cells in a particular company-specific layout. We select the range of the desired cells, copy and paste them in our AutoCAD drawing. This drawing is sent to our customers. The disadvantage of this method is, that when our customers (who use CAD-software of other brands) open the dwg, they don't see the table, but some kind of picture of the table.

Is there a way to 'explode' the excel-table, but keep the specific layout of the table? For attributes in blocks there's the 'Explode Attributes'-command in the Express-tools, but is there something similar for Excel-tables?

Product Design Suite 2014
Inventor 2012 SP2, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
16GB RAM
Nvidia Quadro 4000
Windows 7 Professional (64bit)

View 2 Replies View Related

Xara :: Not Paste Text Copied From Table In Powerpoint 2010

Aug 14, 2012

I've just updated to the latest version which I'm pleased to say resolves both the pdf arrow issue and the text issue I had.

Xara will not paste text copied from a table in powerpoint 2010. My workaround is to copy and paste the table text into a text box within powerpoint and then copy that text into Xara. However I do a lot of pasting from tables in powerpoint and obviously if i could copy direct (as I could from older versions of powerpoint) then my workflow time would half for this -

View 7 Replies View Related

AutoCAD 2010 :: Pull Down Menu And Click Save As Instead Of Window Opening

Apr 17, 2012

All of the sudden, when I go to the pull down menu and click "Save As", instead of the window opening where I can physically choose where I want to save or save over, I get the file directory in the command line. I even typed in the folder directory and it still doesn't save it there. Why the sudden change?

View 3 Replies View Related

AutoCAD Civil 3D :: Force Table And Table Text Height To Stay Constant Despite The Scale?

Feb 23, 2012

Is there a way to force the table and table text height to stay constant despite the scale? I can do it for Point Label Styles with an Expression. But in 2011 there is no way to build an expression for a table style.

I want to create tables in the drawing where the points are and then plot them from a drawing they're Xrefed in to. The tables are too small but zooming in doesn't make them any bigger because the scale of the viewport changes and they adjust.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved