I am currently using 2008. I have data linked an excel sheet to a table in my drawing. That part works fine.I am trying to link cell values in that table to block attributes using fields-object-formula-cell.Numeric values transfer to my field OK but values containing letters or full words transfer as #####.This appears to be the 'way it is' in 2008.
Is there a way to setup vertical alignment of text in a cell for the entire table, when using Table Tool? It is possible for a single cell, but when selecting a table (or multiple cells) this option is not available.
I working with one schedule dwg by using table command. I could not able to edit text in a cell while i double click, inside the table cell. But i can edit by using right click method. before it (double click) was working. now i dont know what happend.
The following snippit of code is changeing the color of text in a cell of an AcadTable. It will set the color to an RGB value and works great. But what if the color is a normal color 1 through 255 from autocad's pen table. How would I set the cell text color?
(setq objColor (vla-getcellcontentcolor eVLAMT R C)) ;sets a Color Object, whatever that is (vla-setrgb objColor RED GRN BLU) ;sets the new color of the Color Object (vla-setcellcontentcolor eVLAMT R C objColor) ;sets that new color object to the cell
I've cut and "paste special" a table from excel to autocad, and would like to edit several (not all) cell's text color from the default (in this case white) to the bylayer color.
When I set up my table style I specified the text to be bylayer, however apparently a paste from excel ignores the setting.
I am creating a table where I want the cell contents to be aligned Middle Center. I can set that up in the table definition and it seems to be in place once the table is in the drawing. If I type text into the cell the alignment is as expected. Whenever I type a number the aligment changes to Top Right. I can go back into the cell and reset the alignment to Middle Center. If I then delete the cell contents, exit the cell then return to the cell and enter a number the alignment returns to Top Right. I want the table to start off empty so others can enter informaiton as it becomes available. Is there a way to have the cell alignment stay the way I wnat it regardless of what I enter into the cell? I tried changing the cell format to text but the instant I entered a number it switched back to a number format and aligned Top Right.
I am trying to find out which Cell in a table is being / has been modified, in AutoCAD 2011 with C#.
I have subscribed to the Table's .Modified event, but when this is triggered by modifying some MText in a Cell, the Table's .HasSubSelection property is false and its .SubSelection property throws an exception. Conversely, modifying the MText in a Cell does not trigger the Table's .SubObjectModified event.
I noticed a class called Autodesk.AutoCAD.Internal.Reactors.TableSubSelectFilter which has a event called CellSelected, but how to instantiate such a class for the Table and subscribe to this event.
How Autodesk intends you to determine which Cell of a Table has been modified?
Is there a trick in using a dynamic block in a table cell? When a dynamic block is inserted into a cell, any visibility can be viewed (Properties Manager) in that cell if the visibility state has a block in it. What happens if the visibility state does not have a block. That is, if the view has exploded block so one can use parts in actions etc? Can I view ANY state in a cell regardless if it has a block or not? Or must the visibility states have blocks to be able to use it in the table cell?
I have set up several tables inside autocad that have one cell as the input cell and after regen the others perform calculations based on that cell. I want to write a command that uses the same value as the input value to draw the arc to scale. I tried using the table value as is called out in the cell field:
^C^C_arc 36,6;e;0,6;r;Table(8796085192704).A3;.
Is there anyway to get a value from a cell inside autocad and put it into my macro so I can draw an arc of the radius shown?
In ACA2008 there seems to be a maximum of 10 Cell Styles allowed in a Table Style? When I try to make a new 11th style, one of the existing 10 styles gets supplanted by the new style.
I have been made one load schedule for distribution panel by using table command in autocad. In that table, I have to mention load with units(watts) for each circuit in cell. (example: 6000w).
If I put like 6000w in a cell, the sum formula's is not working. These formula's used to get total load of panel. what should i do to rectify this problem? How to mention this units in a cell?
In ACA2008, can the display of each of the four edges of a cell in a table be controlled individually? I want left and right edges of cells to display, and top and bottom edges to not display. In the Cell Border Properties dialog box, I can set the Lineweight, Linetype, and Color of each edge, but I don't see how to set the visibility of each edge.
Warning 1 'Public Overridable Sub SetCellType(row As Integer, col As Integer, type As Autodesk.AutoCAD.DatabaseServices.TableCellType)' is obsolete: 'Use Cell functionality instead.'
Then i tried:
Tbl.Cells(0, 0).CellType(TableCellType.BlockCell)
result:
Error 1 Property access must assign to the property or use its value.
Is there a way to unlock a cell using lisp. I have a datalink that is used to create a table. Once the table is selected I have a command that will format some of the cell style (which will let me while locked), but it I cannot seem to find a way to unlock them to merge a couple of cells. I can manually do it using the table toolbar, but programmably I am a little stuck. I can see if it is editable by using the vla-iscontenteditable and it will return :vlax-false. I do not see a vla-setcontenteditble or something to that effect.
Is there any way to reference the name of that system variable contained in cell D3? I want to do this to prevent errors by curious new users that may edit the table, I want the table to reference itself so that the system variable being read is always related to the correct system variable name.
I am using a link to an .xls worksheet to populate a General Table in my .idw (Inventor 2012). See attached. The blank space underneath the first lines of information will always be blank, no matter how many rows we get. Is there a way to have the drawing hide the blank/empty cells, make the borders invisible, etc?
I have tried using the Insert Object for an Excel file instead of using the Table feature, but it does not appear to be an updatable link. As in, if I change data in my .xls file, it won't update the inserted object to the same info.
When you make a custom table in VB.net, adding in the Row Height property in the custom table create line only changes the data cell row heights, not the title cells or the header cell. How do yo do set the title/header cell row heights ?
I struggled for a while this morning with trying to data link to a large door schedule in Excel. After several failures, I searched online for answers, and read in another forum that AutoCAD won't data link to more than 2000 cells.
My door schedule is about 2050 cells now, and will be about 4000 when done. I defined a set of about 1,000 cells in the Excel spreadsheet, and AutoCAD linked to it no problem. So, I tend to believe the poster who stated the 2000 cell limit, but I can't find this.
i Have the dwg drawing in which a table is made by simling joining the lines & putting the text in those line.Can that data in actual be converted into the table?
So, my table has a few rows and a few columns. I want the width of the first cell of the last row to be wider by 1 cm than the width of the first cells of the other rows.
When i select a cell and resize it with my cursor, the whole column changes width. I want the column to stay as it is, just its last cell to change width. How to do this?
I've started having problems when trying to edit text in table cells. Sometimes I double click and all is ok. Sometimes it wont let me select anything in the cell. Sometimes I have to select the cell, then right click to edit text. I get this message:
Is this likely to be a hardwear issue, and the pc is struggling to run AC correctly with all the other crap my company has running in the background? Or is there a systems setting that may have been changed, for whatever reason?
Is there a way in the description field of an Inventor hole table to have mixed units? Some hole sizes at fractions, some at 2 plc, and others at 3 places.
Is it possible to embedd data in a table so that a user can select from a group of data within one cell?
I use this technique quite often in Excel. One cell in a table can have various values: A, B, C, or D. While another cell can have a different set of values to choose from: BLUE, RED, ORANGE, or PURPLE. The user can pull down an arrow (similar to a dynamic block) and choose from a set list of values.