I've cut and "paste special" a table from excel to autocad, and would like to edit several (not all) cell's text color from the default (in this case white) to the bylayer color.
When I set up my table style I specified the text to be bylayer, however apparently a paste from excel ignores the setting.
I am currently using 2008. I have data linked an excel sheet to a table in my drawing. That part works fine.I am trying to link cell values in that table to block attributes using fields-object-formula-cell.Numeric values transfer to my field OK but values containing letters or full words transfer as #####.This appears to be the 'way it is' in 2008.
View 7 Replies View RelatedI create Table using Autocad .net api C#.
var table = new Table();
In single text(class DBText), change text width of the property - WidthFactor.
How change text width in table cell using autocad .net api C#?
I attached some old PDF drawings and they are just perfect. The background is transparent and they really look pretty good. Is it possible to change the color of the pdf text?
Version: AutoCAD C3D 2010
Is there any way to control the line spacing when you have text within a cell of a table? Specifically I want to change the spacing to act similar to 'EXACTLY 1.0' like in the MTEXT editor. Please see the included dwg.
View 3 Replies View RelatedThe following snippit of code is changeing the color of text in a cell of an AcadTable. It will set the color to an RGB value and works great. But what if the color is a normal color 1 through 255 from autocad's pen table. How would I set the cell text color?
(setq objColor (vla-getcellcontentcolor eVLAMT R C)) ;sets a Color Object, whatever that is
(vla-setrgb objColor RED GRN BLU) ;sets the new color of the Color Object
(vla-setcellcontentcolor eVLAMT R C objColor) ;sets that new color object to the cell
In attached file a.dwg, I use battman command to change text color inside the block. It did well for the color change part but get the text upside down as well. I am in 2010.
View 3 Replies View RelatedI decided to use Data Link Tables for my Excel sheet instead of OLELinks. The appearance is far sharper, and I am also pleased there is no background color transfered. What IS the problem is when I update the table, its goes from 12" Wide by 12" Tall table @ 7/16" Text W/O borders back to 3" Wide by 10" Tall with varying text size to fit and gains back all borders except diagonals (of which none are present on the Excel file).
So, any way to default the format when I refresh so that it holds each cell at the 6"X1" dimensions with no border.
With that, If there is a way to have a stencil for making the range links with Excel, that would be useful. I use the exact same 4 or 6 ranges (2 formats) in every dwg.
I was wondering if there is a way to change multiple entities of Mtext. I tried CHT but the options are limited. Is there a way of say changing the color?
View 6 Replies View RelatedIf we want to change the color of a block we have to open block editor and change the color from there.
If in a design we have 100 blocks and we want to change their color to the same (say black), how can we do that? Do we have to do it for every single block or can we select all 100 blocks and change the color uniformly?
is it possible to have multiple plot style tables in one drawing ?
The purpose would be to plot xrefs with plot style table x while maintaining the company's plot style table for the drawing itself. The output would then be a plot in proper style for all parties involved.
This would save us the job of converting the layerstructure we get delivered by external parties to our own.
I put in 3 seperate hole tables in a drawing, labeld one counter bore holes, one dowel hles and one jack screws. used the selection hole method and all the tags were the same starting with A1 ...
Any way to control multiple hole tables so they use different tag numbers
i create multible blocks (min. 100 blocks in diffrent name) with Diffrent hatches in that block....
i want to change the scale in all diffrent hatches.. in all block...
i want any lisp....
How to change the color of a bunch of files in an assembly easily? I don't want to open each file (70+) and change them manually only to find out there was an easier way to do it.
Inventor Professional 2013 (SP-2.3), Product Design Suite Ultimate
Desktop: Intel Core i7 3.4GHz, 16.0 GB RAM, Windows 7 Ultimate SP-1, 64-bit OS, (2) GeForce GTX 580 (331.81), Space Pilot Pro (3.16.1)
Laptop: Intel Core i7 3.9GHz, 16.0 GB RAM, Windows 7 Pro SP-1, 64-bit OS, GeForce GTX 780 (331.81), SpaceNavigator (3.17.7)
Is this possible if i can change the column names, not a cell. For instance: Name of the column is "Full Description" to become something else? Or add a new column with my own description?
View 1 Replies View Relatedis it possible to select multiple text in a file and change the content of all of them at once? Similar to the attribute, when you select different blocks and change their attributes at once. Is there a method including lisp that can do this?
View 9 Replies View Related(Again) Switching the “data type” of the cell,I’m not sure why the AutoCAD doesn't allow changing the “data type” of the cell in the table for already existing data. For example, in the attached table, I wanted to switch the “data type” from “decimal number” to “percentages”, but sounds that the AutoCAD doesn’t allow this function.
In the Excel, for example, we can switch the “data type” easily by selecting the target cells and choosing the format we need! Quite simple, in the AutoCAD, it seems that it needs some work around!
I am working on a corridor project where I have to make section views of the road. I created my sample lines by range of stations, and made all of my section views from there. Now I need to add volume tables for each section view.
I have 28 section views, and more to come when I do another set of sample lines for another road, and I don't feel like going through each section view individually to make volume tables for them.
Is there a way I can create total volume tables for all of my section views at the same time? It would save a lot of time!
Is there a way to select a number if not all objects in a drawing and then change the properties (specifically color) from the command line i.e. without a dialog window?
Custom Build with Win7 Pro 64Bit SP1
Gigabyte Tecohnology Co. X79-UD3
3.60 gigahertz Intel Core i7-3820
16GB GSkill Ripjaw Z PC3 2133 PC17000
PCI-E ATI FirePro V7800 2GB 256bit
ATA SanDisk SDSSDX24 SCSI Disk Device (256 GB)
Dell 2001FP and (2) 2407WFPHC Triple monitor setup
Question - Are you the Common Denominator?
I need to modify the page setup of multple drawings and have it save that way so everytime I open the drawing the chosen page setup is selected.
I'm aware of being able to set multiple page setups in the publish screen, but that isnt a permenant change to the drawings themselves, and not what I'm looking for.
how can i draw a line/arc inside a cell in ACADTable.
View 2 Replies View RelatedI've created a data link, linked to my autocad drawing, checked the box to keep excel formatting and update. Once i Import the table, the size of the table is NOTHING like what the size is in excel.
I have my page layout in excel to be 11 x 17 landscape. I have my table at about 9 1/4 x 15 landscape. Once I import it into autocad, it is now about 6 3/8 x 20 1/4. I don't know what i'm doing wrong but i need it to transfer just like it is in excel as far as the size of it.
I have a whole bunch of labels that are single line text that I want to convert to Mtext. I have been using the Express Tools TXT2MTXT command but that only works on one label at a time. If I select all the labels at once using this command it gives me one long Mtext string. Is there a way to convert all of the labels to mtext, but still maintaining individual entities?
View 5 Replies View RelatedI am new to Civil 3D upgrading from LDD2009. I am trying to edit some point descriptions brought in through a fieldbook import through my survey database. Under my survey database in Survey Points I hit EDIT POINTS and it brings up the SURVEY POINTS EDITOR. My points are listed as white observed points but when I click on the description cell it won't allow me to change anything.
View 7 Replies View RelatedBeen using ACAD for 20+years...AutoCAD 2012/Civil 3D 2012 is driving me nuts. Simple question I am sure. I created a new layer with green as its color. It is showing up as yellow in my viewport. I checked my plot style(ctb), and is same as I have used for many years....prints black(pen 7). Typically shows green on screen and plots black. Looking in the Layer Properties Manager, I noticed that on the far right, there is a column labeled 'VP Plot Syle'. It has Color 2(yellow) shown. How do I change this as I am guessing this is causing issue.
View 6 Replies View RelatedI am trying to change text in hundreds of drawings. What I have is a line of text say "the brown fox" and I need to change it to "the black dog". I have probably 1500 drawings I need to do this in. I am not versed in scripts of lisp. I know the ACAD commands to do this but could develop a script file to batch this.
View 3 Replies View RelatedIn my title block I have a attribute with the name project_Number. Now what I want to do is the following. When I edit my block with the project number. The project number should automatically be added to a text box without me typing in the project number twice.
E.g.. This Drawing is part of the consulting services provided for Project[Project_Number] and may not be used or applied for any other purpose without prior consultation.
in other word the project number should be reference in the text box from the attribute.
I have created subroutines to build tables in AutoCAD.
What I would like to do is to is if a value in the table list (example a question mark), then make the background color of that cell color 1 (red).
List to insert as a table -
(setq List_Table (list (list "A" "?" "C" "D" "E") (list "11" "12" "13" "14" "15") (list "21" "22" "23" "24" "25")))
(Build_Table "Title" List_Table 3 5 0.1 1)
Here are the subroutines -
(defun Build_Table (TableName List_Table NumRows NumColumns RowHeight ColWidth /); P0 Table_Obj KW KK KT KL Blocks_Obj Block_Obj Block_Id)
;--set table scale-------------------------------------
(setq Dscale 1.0)
;--get location----------------------------------------
(setq P0 (vlax-3d-point (getpoint (strcat "
[Code] .......
When you make a custom table in VB.net, adding in the Row Height property in the custom table create line only changes the data cell row heights, not the title cells or the header cell. How do yo do set the title/header cell row heights ?
Dim oRowHeights_FS(11) As DoubleoRowHeights_FS(0) = 0.6oRowHeights_FS(1) = 0.6oRowHeights_FS(2) = 0.6oRowHeights_FS(3) = 0.6oRowHeights_FS(4) = 0.6oRowHeights_FS(5) = 0.6oRowHeights_FS(6) = 0.6oRowHeights_FS(7) = 0.6oRowHeights_FS(8) = 0.6oRowHeights_FS(9) = 0.6oRowHeights_FS(10) = 0.6oRowHeights_FS(11) = 0.6Dim position_FrameShear As Point2d = _invApp.TransientGeometry.CreatePoint2d((oInvSheet.Border.RangeBox.MinPoint.X + 16), (oInvSheet.Border.RangeBox.MaxPoint.Y))Dim oCustomTable_FrameShear As CustomTableoCustomTable_FrameShear = oInvSheet.CustomTables.Add(vValue_FrameType & " " & vValue_Hand & " Frame Shear List", position_FrameShear, 6, 12, oTitles_FrameShear, oContents_FrameShear, oColumnWidths_FrameShear, oRowHeights_FS)
I'm having difficulty making a change to multiple texts. I received a drawing from another firm that uses different text styles than my firm. I can change all the text styles to mine, but they all hold onto their original fonts. How to change the fonts in multiple instances.
View 3 Replies View RelatedI have the AutoCad Map 2009 (32bit) with Windows XP on one Computer and uploaded AutoCad LT 2011 (64bit) in Windows 7 (64bit) on a second Computer. The Files could not be migrated (not the same Program and Operating systems) In Release 11 all my Reference File colors are now faded in Model and Paper Space. What do I have to change so that it looks like in Map 2009?
View 2 Replies View Related