How can I print a dimension with its arrows but without it's dimension lines?
For example--I draw a rectangle and draw a horizontal dimension across the center of the rectangal. Then I flip the arrows and drag the number to the left outside of the rectangal. I want arrows facing inward from the left and right and the number out to the left. I don't want a line stretched across the center of the rectangal.
Inventor 2010 suite
If IV2010 allows hiding of the DIMENSION lines and ARROWS in an IDW files? I found a thread from 2009 that says it is impossible.
However, I found a way to hide them on some RETRIEVED dimensins, but not on others.
How to MANUALLY, or to create STYLE that hides MY choice of:
1. EXTENSION LINES,
2. DIMENSION LINES,
3. ARROWS
Sometimes when I plot/publish a DWF or PDF the arrows extend past the extension lines. I need the point of my arrows always end at the extension line?
View 1 Replies View RelatedI just got a new job with AutoCAD 2011. In the previous version (was using 2008 beore), I could select all lines, dimensions hatches, and then change the dimension style. But with this new version, as soon as I select anything that is not a dimension, like a hatch pattern or a regular line, I can't change the dimension style anymore. Is there anyway to change this back to how it was?
View 2 Replies View RelatedIn AutoCAD, or some 3rd party software perhaps.
Is there a way to automatically display the dimension of lines or objects as you draw them? I looked at dimensional constraints, but AutoConstrain doesn't seem to have an option to automatically apply dimensional constraints....right?
How to scale drawing with dimension lines without changing dimensions in dimension lines? I got drawing with correct dimension lines but geometry is wrong.
View 7 Replies View RelatedI have a rather weird problem. I am using .dxf files as digital overlays on a new optical comparator we recently purchased. The problem is, the cad files we used to create our old mylar overlays is both 3d and comprised of text/curves/dimensions. I figured out the flattening and turning the text into lines and curves, but I cannot find a method to change the dimension graphics (profile boxes, length dimensions, and angle dimensions) into lines and curves.
When I import them into the comparator program only the lines and curves can be displayed on the comparator. Is there any way to flatten and make all of the dimension graphics lines and curves?
I am currently using AutoCAD 2010. I'm placing some length dimensions on partial sections of a circle and the arc dimension comes straight out from the chosen points as a dimension of a flat line does. I would like it to look like an angular dimension without having to use a text override. Is there any way to change that to where the placed dimension lines follows the edges of the section instead of coming straight out?
View 1 Replies View RelatedThe dimension arrws are not printed even though it is shown properly in print preview. I though that it was too small to be shown on print but eventually I do not think that this is the case
View 1 Replies View RelatedI have a problem to do oblique dimension with aligning arrows an dimension the isocircle.
View 9 Replies View RelatedWhen I have to scale something after bringing it in from another drawing (Windows copy, paste), usually (but strangely not always, it seems) the dimension text and arrows are all messed up. If I scale down, they are (obviously) way too big, up, and they are microscopic. How is this best avoided / dealt with? I imagine it is something with the DIMSTYLE not being copied over or something?
View 5 Replies View RelatedI'm inserting dimensions and the tics keep coming out huge and not on the dimension line, in fact there's one on either side 20 ft out. If I change the drawing scale in the tab at a the bottom the tics get smaller and closer in, but they are still off the dimension string by a long shot.
View 3 Replies View RelatedI am using MEP 2011 and have started a new project. Having gone to use the above tool, i am getting no text for the dimension nor the customary arrows at each end of the duct piece i am measuring.
I have attached a small jpeg to illustrate. The dimension is the green line.
Is there any way to import DWG/DXF files with measure lines with arrows.
system configuration:
Win 7 Pro 64bit, Intel i5-2500, 8 GB RAM, 128 SSD SAMSUNG + 2TB on hard drives.
corel version:
X6 VERSION: 16.4.0.1280
Is there any way to dimension a bent lines?i would like to be able to have just one total dimension of these two lines instead of measuring each line.in my type of work it is not necessary to show dimension of each segment, but would be nice to at least show a total dimension instead.
View 3 Replies View RelatedI moved from acad 2000 to 2009. My crosshair hesitates over every dimension line. Also almost impossible to use grips on the dimension lines. Anyway to turn this off?
View 9 Replies View RelatedIs it possible for AutoCAD to notify you if you have overlapping dimensions.
See sample.
DRAWINGS.dwg
i am doing a simple project making a survey plot for a piece of land that will be broken into subdivision. all measurements are of my starting point. after plotting the starting point i try to draw line that is 113 feet long and at a bearing of N 5d W i have no problem entering this data but when i hit enter it draws a straight line. now i know 5 degrees is much of an angle so i thought maybe it just looked straight and tried to plot the next point which was 542 feet from the last point at a bearing of N 39d E but once again after i put the info in and hit enter or space it would plot a line of the proper length but vertical, not the proper angle i need it at. here is how i would put in the info:
first i choose the lne command and choose my "beginning point" as that starting point for my line then i type 113<N 5d W for the length and direction and hit enter. when i do this it plots a vertical line of the proper length but wrong angle. what am i doing wrong? i have ortho set to off and idk what else to mess with
I was trying for an option with wipeout mask.
Is there any option with wipeout to turn the continuous lines into dotted lines instead of hiding the object? I have been working on one staircase block, i want to show half block as a dotted lines.. is there any way to do that without going in to the block edit and change? thats why am looking for wipeout mask option.
I have made thousands of sheet metal parts and their associated drawings without issue but this time, I made a part and attempted to make a drawing but dimension lines won't attach to certain geometry in the drawing. It acts like it will until I click the second line for the dimension then it errors, telling me the same error message that comes up when you delete a feature that previously had a dimension.
I also can't place an origin for doing a hole chart, for example. It just turns purple and says it isn't attached even though it clearly is.
I have a problem with Inventor 2013. The dimension lines have disappeared. I've been through all the dimension styles and layers to make sure I hadn't turned one off
All other drawings are fine and if I create another even using the same model it works just fine but I'd rather find out why than re-do the whole drawing.
when I draw a shape and add a dimension to it, the text and the numerical and the arrows of the dimension are small, so I have to increase the text height manually
how can I make it automatically scale itself?
also similiar thing with the lines, I tried putting a dashed center line on a shape, it looks solid but when I zoom it it does not.
how can I solve this?
I have a template IDW that i use for bearings. When I opened it today I noticed that two of the dimension lines were missing. The dimension and arrows are there. I tried deleting them are recreating them with the same result.
The interesting thing is, when I created the dim above the part it was fine, when I dragged it below the part the lines went away. After that no matter were I moved it the lines would not reappear.
I installed SP1 a while ago and just now installed the update to SP1 (DL20857064.zip). It did not fix the problem.
Is it possible to hide the dimension lines like in the attached picture?
Autodesk Inventor 2012
We resently upgraded to Inventor 2013 and since then we have been having an issue of dimension and leader lines being hidden under a text box or some other drawing entity.
This is very confusing since the text box does not have a white out associated with it, nore is there a way to put the test box to the back and dimension lines to the front...
It seems like our puppet masters that program this amassing tool where up to something and didn't quite get there.
IT sure would be nice (or an absolute requirement) that this gets fixed so I don't have to learn new hoops to jump through to get a quality drawing out of Inventor.
I am using AutoCAD 2010 and when i go to print my design to PDF or even to a printer, the dimension lines do not show up. I have checked my layers and the dimension lines are not on defpoints, in fact they are on layer 0. I have tried to create a new layer and it still does not show up in the work space, let alone when i try to print it.
View 1 Replies View RelatedSometimes when I am dimensioning an object, my autosnap will pick up the end of an adjacent dimension extension line instead of the end of the object. Is there a way to prevent that?
View 4 Replies View RelatedHow do I get the measurement and bearing on my dimension lines? Example would be from the Oleson village dimensions.
View 5 Replies View RelatedI am wondering about something called a "dimbreak" command to break demension lines. I heard it has been used in AutoCad. Is it also something available to Inventor users? I can't find anything when I search for it in Inventor and I need to be able to "explode" or otherwise change my dimensions manually so I can break dimension lines as they pass over other dimension lines.
View 2 Replies View Related>In our Autocad we show the dimensions in drawing by parallel lines pointing from start and end point.
Attached Image : 01
>But we want to show the dimensions as following. Currently we have to draw these lines manually.
Attached Image : 02
>Is there any setting/option to show the dimensions automatically marked by orange circle shown as following.
Attached Image : PDF file
Software : Autocad 2012-64Bit , Autocad_LT 2012-64Bit
Hardware : Workstation Dell Precision T3600
For some reason, if I convert an IDW to a PDF, the dimension lines come out very faint.
View 1 Replies View Related