I am using MEP 2011 and have started a new project. Having gone to use the above tool, i am getting no text for the dimension nor the customary arrows at each end of the duct piece i am measuring.
I have attached a small jpeg to illustrate. The dimension is the green line.
Sometimes when I plot/publish a DWF or PDF the arrows extend past the extension lines. I need the point of my arrows always end at the extension line?
View 1 Replies View RelatedHow can I print a dimension with its arrows but without it's dimension lines?
For example--I draw a rectangle and draw a horizontal dimension across the center of the rectangal. Then I flip the arrows and drag the number to the left outside of the rectangal. I want arrows facing inward from the left and right and the number out to the left. I don't want a line stretched across the center of the rectangal.
How do I scale dim arrows and text not the value itself to be bigger. if the dim is 1" I want it to stay 1" but just be larger. In autocad there was a variable I could set to scale to different sizes. does this exist with inventor or do I have to go through style editor and manually change the sizes and save off to a new style.
View 1 Replies View RelatedHow to switch the direction of text arrows?I’m wondering if there is a way to switch the direction of the text arrows from being left directed to be right?
View 4 Replies View RelatedWhen I have to scale something after bringing it in from another drawing (Windows copy, paste), usually (but strangely not always, it seems) the dimension text and arrows are all messed up. If I scale down, they are (obviously) way too big, up, and they are microscopic. How is this best avoided / dealt with? I imagine it is something with the DIMSTYLE not being copied over or something?
View 5 Replies View RelatedI have received details that have been blocked that I need to edit. When I expode or burst them, the dims text and arrows grow larger than is required for the block and I cannot find any adjustment in the properties to bring them back to the correct size for the detail. Also the leaders lose their point and association with their text and become just a line.
Is there a command that will allow me to edit the block without loosing the current sizing and associations?
I want to create arrows as an overlay on a sports video to highlight a certain player. Thought I could do this by creating a title using Winding3 font - but when i select Windings3 font in Corel Video Studio - instead of seeing arrows - like i do in Word, I see the alphabet? Is there any way to create Arrows in Corel VideoStudio 4Pro?
View 4 Replies View RelatedI open a new background - 1440 x 600. Then import my image (in new layer) - 1350 x 280.
Now I want to put some text or arrows pointing from the background to the image but I can only write/draw on the imported image not the background. Have tried merging to no effect.
I re-opened a drawing this morning and found some text to be different height from the rest. When I attempted to adjust all of the heights to be the same using the properties method, they all became bigger. Instead of all of them going to 6", the 5" text went to 6" and the 6" text went to 7-3/16". So, I checked the formatting size and the properties size and they did not match. See PDF.
deleting the larger inconsistent text?
I have a drawing which has hundreds of levels on and i'm trying to establish what the MEAN level is and the AVERAGE level. I thought the best way might be to extract the text to excel and perform it there but at the moment the only way i can do it is to copy and paste the text and its taking me forever. Is there a way to either a) extract text to excel or b) calculate a MEAN value based on texted selected?
View 2 Replies View Related(Again) The “leader” of the “dimension text” disappears when the text is moved! Why?
I’m wondering why the “leader” of the “dimension text” disappears when the text is moved.
How can I control this setting?
I need to show this “leader” all the time. Is that possible?
Please, have a look on the screenshots below (the file is attached).
Is it possible to create a field that will show only a portion of the contents within an text object? Maybe using diesel or something?
Example:
There is a text object that contains "FIRST TEST", is it possible to create a field from that object that contains the first 5 letters of the text "FIRST". If the original text was changed to "SECOND TEST" the field would be updated "SECON"
I wonder if it is possible to create a new text style where one can set the text to be already rotated.
I know that it is possible to rotate text in many ways but the styles always seem to be set on the horizontal to begin with.
C3D 2012
Win 7 64 i5
8GB RAM Quadro FX 1800
I know I can rotate text with the rotate command or from the properties palette, but if I'm editing text and the text formatting toolbar is displayed, why don't I have the ability to modify the rotation right there? How do I get it there? Can I customize this toolbar?
View 3 Replies View RelatedI want to place text along an arc as shown in example dwg, how do this using array or other method?
View 5 Replies View RelatedBy some setting or default, when I dimension a diameter in Autocad 2010, I get a dim line that only has one arrow that points to one side of a circle, just like a radius. I'd like the diameter dims to have an arrow on both sides of circles.
I've been through the settings in Dimstyles. and didn't find a combination that made the desired change. I've looked at the properties for a specific diameter dimension and found nothing that worked there. I looked into block modifications using BEDIT and Properties, but I found nothing there either. While I may have overlooked a combination of changes in Properties, I tried a lot in there.
Toolspace > Settings > General > Label Styles > Line
When I create a line label, one of the components available is “Direction Arrow”. This component is not available for “Curve” labels. I would really like to use C3D labels to indicate direction (I realize curves don't have a 'direction', but I don’t mind manually flipping and reversing the arrow). Is there any other label option in C3D that will draw a direction arrow for curves?
When I did the confirmation after I drew the arrow, it shrank to be small. Like the pictures attached.
View 9 Replies View RelatedI noticed a post a few years ago mentioning this function wasn't available then. Is it still not available? Is there a routine? A lisp? An expression that I can make to put a slope arrow inside every tin in my surface with a % grade?
View 1 Replies View RelatedThe dimension arrws are not printed even though it is shown properly in print preview. I though that it was too small to be shown on print but eventually I do not think that this is the case
View 1 Replies View RelatedWhen I use slice command in a 3D model, after separation into two parts, each part can't editable, you can only move them.
You can see in arrows on # 1 and # 2 3D model, but after using separate into it two parts by slice command , these arrows are disappeared.
How can I see arrows again to change dimensions of 3D model easily?
I hope that you can understand what I mean. [URL]....
I've seen that its possible to have multiple drop-down arrows (lookup/visibility states) within 1 block. How do I do that? I am redoing my title block & would find this extremely handy for all the different options I want to select.
View 5 Replies View RelatedI have a problem to do oblique dimension with aligning arrows an dimension the isocircle.
View 9 Replies View RelatedI have utilized the "old school" Flow Line Lintetype (with the ARROW that is never really centered) for many years
I have been trying to acquire the preferred FlowLine Arrow Linetype (complex with the arrow shape)
So far, I have not succeeded. What is the easiest way to obtain/create this preferred linetype ? (arrow directions change with the direction of the polyline)....
In my Inventor .idw browser my parts have a green arrow next to them but I can't seem do anything with them, I think they might be a refresh icon .
View 2 Replies View RelatedI was working away and just before I was getting readly to print when I found that my arrows where not filled.
I check the arrowheads and it is set to "closed filled. And the text is ok.
I have had this happen before but the text was the same way. how can I fix this?
I was using AutoCAD 2009 and it was set up for me. Now I'm using 2012. How do I get the big thick coloured UCS (XYZ) that looks like three arrows back on screen. The one that is on my screen at the moment is the one that looks like three thin stiks (XYZ).
View 7 Replies View RelatedI've been asked to create some plots of vector arrows showing the results from water current metres, ie each data point has a position (x and y only), direction and a velocity.
I have created a dynamic block to handle the vector data (a simple arrow with a stretch and rotate controls)
What I need now is to somehow read in the values for each block from an excel spreadsheet or txt file?
Windows 7 x64
32GB RAM
Xeon E5420 @2.50GHz
3DS MAX 2014
Civil 3D 2014
Here's my Lisp routine.
(defun c:ll() (errorek) (setq akt_lay(getvar "clayer")) (setq akt_dimldrblk(getvar "dimldrblk")) (setvar "clayer" "ELEMENTS_NO") (setvar "dimldrblk" "_DOTSMALL") (command "qleader") (setvar "clayer" akt_lay) (setvar "dimldrblk" akt_dimldrblk) (setvarki) )
(defun setvarki() (setvar "Filedia" filedia) (setvar "osmode" osmode) (setvar "orthomode" orthomode) (setvar "autosnap" autosnap) (setvar "cmdecho" cmdecho) (setvar "dimse1" dimse1) (setvar "dimsd1" dimsd1) (setvar "dimjust" dimjust) (setvar "dimldrblk" dimldrblk) );defun
(defun errorek() (setq MojError *error* *error* WlasnaObslugaError filedia(getvar"filedia") osmode(getvar"osmode") orthomode(getvar "orthomode") autosnap(getvar "autosnap") cmdecho(getvar "cmdecho") dimse1(getvar "dimse1") dimsd1(getvar "dimsd1") dimjust(getvar "dimjust") dimldrblk(getvar "dimldrblk") );setq);defun
What am I going to do?
1. I want to have default leader arrow - "closed filled".
2. In lisp routine from "code 1" I want to put leader (actualy leader without text) with arrow "dotSmall".
3. When I press [Esc] during drawing leader I want to set up back default leader head as "closed filled".
Why my routine doesn't work properly?
Inventor 2010 suite
If IV2010 allows hiding of the DIMENSION lines and ARROWS in an IDW files? I found a thread from 2009 that says it is impossible.
However, I found a way to hide them on some RETRIEVED dimensins, but not on others.
How to MANUALLY, or to create STYLE that hides MY choice of:
1. EXTENSION LINES,
2. DIMENSION LINES,
3. ARROWS