AutoCAD Inventor :: Green Arrows In Parts Browser
Aug 6, 2012In my Inventor .idw browser my parts have a green arrow next to them but I can't seem do anything with them, I think they might be a refresh icon .
View 2 Replies
ADVERTISEMENT
AutoCAD Inventor :: Getting Green Recycle Arrows And Corner Indicators In IDW File?
Oct 14, 2012why i am getting green recyle arrows in browser and green corner incidicator in .idw file.
What does it represent? if it comes because of design error then where to look for the mistake.
AutoCAD Inventor :: Parts Visibility (browser) In IDW Not Enabled?
Nov 13, 2013how to turn this feature on? We recently upgraded from Inventor 2011 to 2014 and now this feature has been disabled. The attachment shows that visibility has been greyed out.
View 2 Replies View RelatedAutoCAD Inventor :: Cannot Reorder Regular Parts Browser
Dec 12, 2012In Inventor 2012 I could grab any part (except patterns of course) and move it anywhere into folders, out of folder, up down, wherever, till my hearts content. But in 2013 sometimes it lets me, sometimes it does not. Sometimes I select a group of parts and when I try to put them into a new folder it will place most of them in it tell me the others are not allowed to be moved? I must stress that these are NOT patterned parts, but stuff I have moved around for at least the last 2 versions of the software. Why in 2013 can I not do this as easily or at all in some cases? Is there a new check box checked by default I can't find? I have tried switching the browser between modeling and assembly view and sometimes it works and sometimes it does not.
It does this with both content center and non content center parts.
Inventor 2013 sp1.1
AutoCAD Inventor :: IPN - Browser Shows Too Many Parts Or Assemblies
May 30, 2012When copying an iam + ipn, and making some changes, the browser suddently shows far too many parts or assemblies ?
Is there a way to "update" the browser?
AutoCAD Inventor :: Section View And Visibility Of Browser Parts
Sep 5, 2012I have a section view of an assembly. The parts of the assembly that are completely remove via the section no longer show up in the browser. Is there a way to make them show back up in the browser and/or section view? They are internal to the assembly and I would like them not sectioned/removed from the view.
View 3 Replies View RelatedAutoCAD Inventor :: How To Sort Parts Inside Browser Folder
Nov 17, 2012Alpha sort in assembly bonus tool sorts outside browser folder. Is there any method (API) to sort inside browser folder?
View 3 Replies View RelatedAutoCAD Inventor :: Parts Showing In Vault Browser That Do Not Exist
Aug 4, 2011I have an assembly model which I have `save copy as` to create a new assembly (80% parts the same). I have opened my new assembly and deleted/replaced parts and assemblies that I do not require.
One (released) assembly I have deleted is still showing listed in the vault browser (not in model browser). It is not in the model, is not revealed by `find in window`, is not listed in the bill of materials. If I close my assembly and reopen it is still listed there.
This has now occured in two assemblies. I have never experienced this before in many years of use. We recently upgraded to Inv 2011 and VM Pro 2011 and I'm wondering if there is a connection.
AutoCAD Inventor :: Parts Has Partially Or Completely Grey Properties In Browser
Mar 2, 2012Some parts properties of one project has partially or completely grey in browser.
Nothing special had happened prior to this problem. It happened with some absolutely irregular and not systematic affection as like a fallen and broken ink bottle makes something completely colored and some other stuff just partially and some not.
I mean some parts properties are completely grey and some have just several grey properties while some other are not affected (see video link)
It is a permanent bug and seems it belongs to the part itself since the reloading Inventor and windows and Task Scheduler attempts to fix it - all gray colors stay exactly where they were before and in same irregularity. Opening the affected parts in other project gave the same result as in original one.
[URL]
AutoCAD Inventor :: Getting Error Message When Right Clicking On Suppressed Parts / Assembly In Browser Window
Sep 19, 2012When I suppress a part or a sub-assembly in Inventor 2013 and then right click on the suppressed item in the browser window I always get an cadabundus error message (see attachment), after I press OK I get the normal right click menu hovering over the item.
I have Inventor 2013 RTM 64 bit Build 138, and running on Vista 64bit.
Illustrator :: How To Unite Red And Green Parts Of Leaf Into One Solid Green Leaf
May 21, 2012How to unite the red and green parts of the leaf into one solid green leaf? See attached “Leaf” file. (How do I attach the AI file?)
I tried the Pathfinder UNITE command and the Live Paint MERGE command.
AutoCAD Inventor :: Drawing Browser Doesn't Match Model Browser
Oct 29, 2012I opened the drawing and then from the drawing opened the model. In the drawing it is showing the 4th instance of ROUND CRS-032175 X 33 as an assembly. It also is not showing in the view and yet the visibility is checked. AI2012 SP2
View 1 Replies View RelatedAutoCAD Inventor :: Cannot Add Browser Node To Empty Browser Folder
Apr 8, 2013I am trying to use the Browsernode.addchild method to add an occurence to an empty browser folder. The code fails at this point and I gett an error pointing to the line "Call oTargetNode.AddChild(oSourceNodeDef)". I can add the occurence with the browserpanes.Reorder method without issue if the folder is not empty. The code is pasted Below.
Format:HTML Format Version:1.0 StartHTML: 165 EndHTML: 29338 StartFragment: 314 EndFragment: 29306 StartSelection: 314 EndSelection: 314
SyntaxEditor Code Snippet
DimPrcsTpAsStringPrcsTp=InputListBox("Process Type?", MultiValue.List("ProcessType"), Parameter("ProcessType"), Title :="Select Process Type", ListName :="Process Type")DimRtgNameAsStringRtgName=PrcsTp&"-"&Parameter("NoRtgsInc")+1MessageBox.Show(RtgName, "Title",MessageBoxButtons.OKCancel)DimoAsmAsAssemblyDocument=ThisDoc.DocumentDimoMatrixAsMatrix=ThisApplication.TransientGeometry.CreateMatrixDimoOccAsComponentOccurrenceoOcc=oAsm.ComponentDefinition.Occurrences.AddVirtual(RtgName, oMatrix)DimoCompDefVirtualAsVirtualComponentDefinition=oOcc.Definition'CREATE AND SET THE
[code]....
AutoCAD Inventor :: Force To Use Browser Of Choice Or Default Browser?
Nov 7, 2011When I press F1 Inventor opens the help on my default browser (Chrome), but when I click the bynocular it uses Internet Explorer.
Is it possible to force Inventor to use a browser of my choice or the default browser?
AutoCad :: Dimension Arrows - Point Of Arrows Always End At Extension Line
Aug 17, 2011Sometimes when I plot/publish a DWF or PDF the arrows extend past the extension lines. I need the point of my arrows always end at the extension line?
View 1 Replies View RelatedAutoCAD Inventor :: How To Scale Dim Arrows And Text
Feb 20, 2012How do I scale dim arrows and text not the value itself to be bigger. if the dim is 1" I want it to stay 1" but just be larger. In autocad there was a variable I could set to scale to different sizes. does this exist with inventor or do I have to go through style editor and manually change the sizes and save off to a new style.
View 1 Replies View RelatedAutoCAD Inventor :: Replacing Parts With Custom Parts Created From Content Center
Sep 27, 2012I am trying to replace a custom part - created from a content center part - with a copied part with a different name. (I am using the replace tool in an assembly.) However, Inventor is not replacing the part with the part I pick but rather the content center version of it.
View 3 Replies View RelatedAutoCAD Inventor :: Showing Two Instances Of Parts List And Adding Custom Parts
Mar 30, 2012On the main sheet of my drawing I have the overall Parts List. Shows almost all parts except for the few that we don't want to list. On the second sheet I inserted a Parts List to show only parts that are shown in a detail on that page, made the rest non-visible.
On the main sheet there is an item (#13) that has a QTY of 3. Two of those Three are optional parts. What I'm trying to do is insert a custom part into the Parts List, give it an item number of 13A and put in the description "OPTIONAL", then do an Override in the balloon to show 13A.
I get it in the Parts List, Apply it, close it, save the drawing. Looking at the Parts List, item #13A is there, but item #14 is gone. I go back into the Parts List and 13A is there and there's a blue box around the item # and the description. I uncheck Static Value and number 14 shows up (item # and the description).
Then I go over to sheet two, open that Parts List and it lists 13A at the bottom with all the info I added in sheet one and it's non-visible. Go back to sheet one, open the Parts List and there is no 13A to be found.
AutoCAD Inventor :: Creating Parts With Work Planes Defined By Other Parts
May 2, 2013I am working on an assembly that is designed around a box (bounding box) that could change size. I modeled the bounding box and placed it in a new assembly file. All other parts have been created within the assembly by referencing that bounding box with starting work plane and project geometry.
The problem comes in when I change the bounding box dimensions. The work planes for each additional part, which were defined by the faces of the bounding box, do not move when the sides move. Also, my projected geometry is not updating correctly. This is a simple box, with all 90° corners. So, all associated parts (at this point) are just rectangles.
AutoCAD Inventor :: Parts List Update When Modifying Model Parts In Idw
Aug 21, 2012My parts list on my idw do not update when I make changes to the model. Specifically, I have deleted a bolted connection on my design and replaced with a different components but the parts list table does not update - all I see is a lightning bolt in the browser next to the parts list but I cannot update it here.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
AutoCAD Inventor :: Virtual Parts Weight Total BOM And Parts List
Aug 7, 2013I was using virtual parts to add nuts and bolts to a drawing in 2013
I can make a VP bolt in the assembly, no problem, set it's size, weight, etc.
In the VP itself, there is no option for number of bolts I want it to emulate. For arguement's sake the weight was 1 pound per bolt (they are big bolts).
I can go into the BOM and say quantity 60, hit done and save the assembly.
If i open the drawing, the parts lists shows 60lbs for the 60 bolts total - which it should when summing the weight.
The problem is the BOM/assembly. If the weight of my assembly (without bolts) is 10,000lbs, the assembly sees the VP weighing 1lb and says the total weight is 10,001 lbs. Am i going to have to pattern a fake part to get this to work right? Shouldn't the total weight take into account the quantity set in the Bom??
AutoCAD Inventor :: Display Density Of Materials Assigned To Various Parts In Parts List On Drawing?
Dec 9, 2013Is there a way to display the density of materials that are assigned to varius parts in the parts list on a drawing? I don't need the mass of the parts I just need the material density to show up next to their respective parts.
For example, if I have a part with [steel mild] material assinged to it (no matter the size) I need a column in the BOM on the drawing to show: 490.684 lbs/ft^3. "Worry when there's something to worry about."
AutoCAD Inventor :: Assemblies Showing In Parts Only Parts List
Jul 10, 2012I have an assembly with a lot of purchased parts. I need to create a buy out list for purchasing. I've done this many times in the past and have a template set up for this purpose.
So now the problem, In this assembly, I have subassemblies showing up on my parts only parts list.
One of the subassemblies cinsists of two purchased parts. Both parts are set to purchased in the Bill of materials. If I do a parts only list on this assembly, it works as expected, showing two purchased parts. However, if I put that assembly into a higher level assembly, A parts only parts list shows the assembly instead of the individual parts.
AutoCAD Inventor :: IDW View / Parts List Changes From Structured To Parts Only
May 3, 2013IV 2010 Suite
Been working over an idw MANY times due to project lag.Today I opened it up and tried adding balloons to an already ballooned assembly.
The parts list has not changed, and is "structured".But, if I try adding balloons, they tag each part, not the entire assembly.
Also, I verified this by trying to add another parts list, which defaults to "parts only".
I can't show my data set, b/c it's HUGE, plus it's proprietary.
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
AutoCAD Inventor :: Allows Hiding Of DIMENSION Lines And ARROWS In IDW Files?
Sep 23, 2011Inventor 2010 suite
If IV2010 allows hiding of the DIMENSION lines and ARROWS in an IDW files? I found a thread from 2009 that says it is impossible.
However, I found a way to hide them on some RETRIEVED dimensins, but not on others.
How to MANUALLY, or to create STYLE that hides MY choice of:
1. EXTENSION LINES,
2. DIMENSION LINES,
3. ARROWS
AutoCAD Inventor :: Parts Not Selecting For Parts List
Sep 22, 2011I have a .idw that I'm trying to make a parts list on. I select parts list and highlight everything. There are two screws that are not showing up on the parts list. I cannot select them manually either. It's acting like they are not there. Even if I do a complete parts list (adding the assemblies parts into one big list), they still don't show up.
How can I select these parts? What is wrong with them that they do not show up in the parts list?
AutoCAD Inventor :: How To Reuse Parts Rather Than Create New Parts
Jul 25, 2012I have been working with an assembly today where it is ideal to mirror parts and have figured out how to reuse the parts rather than create new parts. Now I find that when the parts are mirrored, they ate not retaining the mates. Where do I find the setting so they either retain their mates, or prefferably retain the mirror so that if I move the origional, the mirror moves as well?
View 9 Replies View RelatedAutoCAD Inventor :: Loss Green Marker?
Mar 12, 2013I have lost the green marker which signify the end points are coincident. How do I switch it on again?
View 8 Replies View RelatedAutoCAD Inventor :: No Green Dot Showing Up - Only Yellow
Jan 7, 2010When I am trying to make any shapes on my computer...even just a closed triangle with the LINE TOOL...when I come back tot he starting point to close the triangle, the dot neer turns green. Not even if I am directly on top of it. Is there some setting that got changed accidentally, that is causing this?
It works on my computer at work, just not my laptop. Others I know have the same laptop and recieved the same install...and it works for them.
AutoCAD Inventor :: What Are The Green Lines In A Title Block
Jan 1, 2013In the ANSI-large, the default title block in the ANSI drawing template, when i edit the title block i see green lines which might use for aligning text. they disappear when i finish editing.
They are on a layer that's: By Standard (title ANSI). The rest of the lines are black and are on the title ANSI layer. What's this By Standard prefix? What are they and how to make them?
AutoCAD Inventor :: Green Brackets Around Drawing View?
Aug 9, 2011For Inventor 2012? IV2012
Windows XP SP3 32-bit
Intel Core 2 Duo 6400 @ 2.13 GHz
Nvidia Quadro FX 3450/4000 SDI 256MB Vram
2 GB Ram
160GB HDD
