How do I scale dim arrows and text not the value itself to be bigger. if the dim is 1" I want it to stay 1" but just be larger. In autocad there was a variable I could set to scale to different sizes. does this exist with inventor or do I have to go through style editor and manually change the sizes and save off to a new style.
View 1 RepliesI know there is a way to change the size of the arrows, I already did it and made them bigger and I forget how to make them small again...
View 1 Replies View RelatedSometimes when I plot/publish a DWF or PDF the arrows extend past the extension lines. I need the point of my arrows always end at the extension line?
View 1 Replies View RelatedI am using MEP 2011 and have started a new project. Having gone to use the above tool, i am getting no text for the dimension nor the customary arrows at each end of the duct piece i am measuring.
I have attached a small jpeg to illustrate. The dimension is the green line.
How to switch the direction of text arrows?I’m wondering if there is a way to switch the direction of the text arrows from being left directed to be right?
View 4 Replies View RelatedIm working for a geological firm that use timescales to describe their work (depths at times etc). I need to compress the time bar but not alter the text but cant find way to do it. Im only scaling in 1 direction.
View 4 Replies View RelatedWhen I have to scale something after bringing it in from another drawing (Windows copy, paste), usually (but strangely not always, it seems) the dimension text and arrows are all messed up. If I scale down, they are (obviously) way too big, up, and they are microscopic. How is this best avoided / dealt with? I imagine it is something with the DIMSTYLE not being copied over or something?
View 5 Replies View RelatedWhen labeling a view in an Inventor Drawing (Inventor 2012) I want the view identifier label to show but I don't want the scale to appear. Is there a way to turn this off without going into the format text and deleting it every time? When I was using Inventor 2008 it always made me click to turn the scale "on" or visible. Now it does it automatically.
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
I have received details that have been blocked that I need to edit. When I expode or burst them, the dims text and arrows grow larger than is required for the block and I cannot find any adjustment in the properties to bring them back to the correct size for the detail. Also the leaders lose their point and association with their text and become just a line.
Is there a command that will allow me to edit the block without loosing the current sizing and associations?
In my Inventor .idw browser my parts have a green arrow next to them but I can't seem do anything with them, I think they might be a refresh icon .
View 2 Replies View RelatedI want to create arrows as an overlay on a sports video to highlight a certain player. Thought I could do this by creating a title using Winding3 font - but when i select Windings3 font in Corel Video Studio - instead of seeing arrows - like i do in Word, I see the alphabet? Is there any way to create Arrows in Corel VideoStudio 4Pro?
View 4 Replies View RelatedInventor 2010 suite
If IV2010 allows hiding of the DIMENSION lines and ARROWS in an IDW files? I found a thread from 2009 that says it is impossible.
However, I found a way to hide them on some RETRIEVED dimensins, but not on others.
How to MANUALLY, or to create STYLE that hides MY choice of:
1. EXTENSION LINES,
2. DIMENSION LINES,
3. ARROWS
I open a new background - 1440 x 600. Then import my image (in new layer) - 1350 x 280.
Now I want to put some text or arrows pointing from the background to the image but I can only write/draw on the imported image not the background. Have tried merging to no effect.
why i am getting green recyle arrows in browser and green corner incidicator in .idw file.
What does it represent? if it comes because of design error then where to look for the mistake.
I have a 3D part, which I want to scale down to 0.5 the size in X and Y direcions, but I don't want to scale it down in Z direction.
Is this even possible? How do I go about doing it?
I've created a drawing and when I create a detail view, the actual view appears in the drawing but the circle and arrows along with the view identifier are not showing up. It's like the visibility has been turn off. how to turn it back on?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
Using AutoCAD Map 3D 2012 Im exporting a few subdivisions to MapInfo after doing my steps on a MAPEXPORT command to create a .TAB or .MIF / .MID which are the steps do below.
MAPEXPORT --> select format_ .TAB or .MIF ---> select my drawing manually ----> do my coordinate conversion -----> DONE..
When in MAPINFO and ready to open / import the exported .TAB it opens and places the drawings (subdivisions) in its correct coordinate I gave it, but the TEXT and ARC / CIRCLES do not come in to scale at all they are extremely large to a point where they can't be seen till I do a zoom all.
I am trying to set up my template for architectural drawings. I would like to use annotative text and dimensions and leaders. I have selected a font and am trying to set my Paper Space text height to 3/32" so all drawings in all scales have text of 3/32". When I type in 3/32" it returns a value of 1/8". How do I get it to recognize the 3/32" value. Also if I save this in the dwt file will it always be set for this?
View 7 Replies View RelatedWhen I create new drawing, for example, the drawing looks good in 1:400 scale and text I use 1mm height for bearing & distance and it looks good and readable(not too big or small). However, when I create the new drawing and scale it to 1:2500, I don't know what size should I set for my text so it will looks good and readable.So, my method is to set random size so it would look good in model and paper size the print it out.But, sometimes, the text will looks big or too small on actual paper. Then I need to repeat the process till it readable.
My question is, can autocad scale the text size automatically when I create new drawing at different scale .
I have this layout inside cloud area i want to standard setting like if i want to print on A3 paper which text height i need to use dimension title block etc.
2nd question is that inside cloud area there is some point (Red) like M1 to Mxxx i need to get coordinate in table is there any lisp to make table with coordinate otherwise i need to pick one by one point p
I have a dwg template that has a Multileader Style that uses Annotative text. When I changed a viewport to a different scale....from 1"=1' to 3/4" =1', the text is not appearing to scale. It's very large. The Mtext changed to the correct scale but not the Multileader text. Where do I need to make a change?
View 5 Replies View RelatedI've got a problem with a title panel that we've created. We're using a new type font - VAGRounded-Thin - however when in paper space and we zoom in and out the text font enlarges or reduces as we scroll in and out with the mouse wheel.It's still coming out fine when printed [pdf and hardcopy] it's just on the screen.
View 9 Replies View Relatedi have a structural xref drawing that has all the text 10"high. I xref (overlay) that drawing into another one, but that drawing is going to have a scale 1/4"=1'-0" is there a way to auto scale all the text in to xref to become 4" high?
a bit more information
the structural drawing that im xrefing in will be overlayed over my floorplans, then printed at the 1/4"=1'-0"
I need the structural base drawing to keep the 10" text height because some times i have to print off the entire structural plan separate.
I have a 50 scale drawing and my section views are 10 scale. The text size is correct in paperspace viewports, but is much too large in model space, and makes it difficult to work on the sections in model space. (I've attached a pdf of sections in model space).
View 7 Replies View RelatedI am using CAD LT 2005 but also have access to AutoCAD 2005.
I am unsure about the best way of dealing with text in drawings. Originally I used to put my text in model space - which was fine until I started using multiple layouts in paperspace at different scales. The text would come out either to big or too small.
Others in my office say they put the text in paperspace ONLY at the right scale for that layout. This is fine until you realize that if you have to put text in 4 different layouts at 4 different scales 4 different times it takes forever.
So - I looked up about a command called SPACETRANS which seems to offer a way of working out the right scale for the text in paperspace. EG. Working in mm in model space a good text height for me was 1000. By using the spacetrans command in paperspace I worked out that the text height to be used here was 9.2. This basically gave me my text in paperspace at the relatively same height as it looked in model space.
I now realize that although I can scale my text happily to the right size in all my layouts it hasn't negated the need for me to type it all in many times over. Basically, I still have to type the text into paperspace at the right scale - in this example at 9.2.
How you can type your text in once anywhere (probably model space) and then scale it in all the different viewports without having to retype it all in?
I have successfully created one drawing using annotative dims and text - I have set my text to 1:1 scale, height = 30 in paperspace (although I don't get what this refers to when it automatically says it's 30 in modelspace too) and my viewport is 1:20 scale. It's all good, the dims and text look great, which is what I want at the end of the day, however I got there.
But, when I want to set up another detail at 1:40 scale, I can't for the life of me figure out how to make the same dim and text style appear the same size as it was for the 1:20 detail.
In paperspace the text are so out of scale and it only shows a specific area of the model view.the other viewports will have a realistic and 2d wireframe.
View 5 Replies View RelatedI have a drawing that contains texts that are annotative. But I would like to change the scale of the drawing with the floating model space viewport in Paper Space. I know I can individually right click on the text and Add Current Scale to them but is there a way to do so globally?
View 1 Replies View RelatedI have different annotative dimension on my drawing, when I select one all others dimension show up as you can see on the picture (260 three times ). Is there any solution to select dimension or text without showing other scale?
View 8 Replies View RelatedI'm drawing a gas line (the one that says gas throughout the length of the line) and i can't seem to scale the text 'gas' properly, it seems that it is all squashing up and i cant make out what it says. I've tried ltscale, psltscale and the actual linetype scale of the line to no avail. I'm sure this is a simple problem, i just cant work it out.
View 2 Replies View RelatedI have a base plan. The text scale is set to 1"=40' I xref the base plan into a strucural bridge plan sheet and scale the base map x 12 so that i can work in architetural scale. How do I get the text to scale correctly in the xref'd base map that has been scaled by 12 for a 1/8" scale?
View 3 Replies View Related