I have a base plan. The text scale is set to 1"=40' I xref the base plan into a strucural bridge plan sheet and scale the base map x 12 so that i can work in architetural scale. How do I get the text to scale correctly in the xref'd base map that has been scaled by 12 for a 1/8" scale?
View 3 Replieshow annotative objects function through xrefs and am running into some trouble.I created a brand new drawing, made an annotative symbol and 2 peices of annotative text, all three have 1"=20' and 1"=40' assigned to them. I can switch my scale back and forth and the objects act as they should.
If creat a second drawing and xref the first one, the only way I can see these xref'd objects is if I set ANNOALLVISIBLE to "1" or if I select one of their xref scales as the current scale 1"=20'_Xref or 1"=40'_Xref.
My goal is to be able to have plans that are annotative that can be xref'd into another annotative drawing and have the objects in both that are the same scale show up.
Im working on a drawing and im going to have window tags (ones i created with just text and made into a block) with 8" high text in the main drawing. im going to xref that drawing into another drawing but i want all those window tags to be scaled to .5 (giving 4" high text) but nothing else to scale. Is there a way that i can do this?
View 1 Replies View RelatedI have this complex section of an architectural project, which is drawn at 1:1 scale (obviously). It has lots of constructive details, however i've made lots of layers and everything is under control.However, as I started to hatch the drawings, i was having big problems at using the same drawing for different scales, because non-annotative hatches also change their size with different scales.
So I began trying annotative, and i did it as i read in several how-tos. I made an hatch in the layout to know the perfect scale for the hatch, then applied that scale in model hatches. Then, in properties, I selected the scales at which that hatch should belong. Until here everything was OK!
However, as the ideal scale for the hatches (ANSI31) was something like 0.0003, here started the problems. The layout has an erratic behavior with similar hatches (I even tried to use match props to be sure different hatches had the same properties). On different viewports, some of the hatches appear as solid, and they plot just like that! As I zoom in and zoom out, the problem changes, as problematic viewports become right and others become wrong.
I tried to change HPmaxlines to 10000000, i tried to change the size of ansi31 in acad.pat, however the problem persists. It seems that the problem disappears when i have increase the hatch scale to, lets say, 0.05, however it's not that scale I want because of the presentation...
I have a drawing (attached) with the following settings: LTSCALE = 1, MSLTSCALE = 1, PSLTSCALE = 1.For some reason the linetype is not scaling based on the annotative scale. It will update correctly if I change the LTSCALE but for some reason it wants to ignore the MS and PSLTSCALE variables.
As a note, the drawing was converted from a Microstation drawing and the linetype is a converted Microstation linetype.Is there something in the linetype that is doing this.
I am rather new to AutoCAD 2010, and have observed issues with Annotative Scale. I have tried to avoid that function like the plague, but now I have some time to learn of it and its power.
I've been tasked with creating/updating Electrical Department symbol blocks. Right now, I am working on lighting fixture blocks, and I have this particularly odd scenario when i'm making the Block Attributes. My new block is for a 2 foot by 4' lighting fixture. When this block is to be inserted in Model Space, the size will always remain constant (2'x4'), but I need the Attributes (one for the Fixture Type, and one to denote the Circuit Number and Switch leg) to change sizes per the plan scale on Paper Space.
How, and in which space, should I construct my light fixture block & attributes? And, which parts of the block or attributes should be Annotative? Also, the light fixture can be either oriented vertically or horizontally. Will I still be able to relocate the attribute using -EATTEDIT or -ATTEDIT?
I seem to have lost the ability to add or remove an annotative scale for a single item (piece of text, block etc). I've always picked the annotative scale in the properties box and then hit the box at the right which brought up a small dialogue box where I could add or remove scales for the item that I'd highlighted. When I hit that box now, or the similar box in the right click menu nothing happens. AutoCAD acts like the box is present, but it isn't. The right click option of remove current scale doesn't work either as it seems to remove the scale from multiple items.
I have recently gone from two monitors to one (it's a real bummer). Is it possible that the dialogue box is open somewhere I can't find it? I have hit the show desktop button and it isn't there.
I have successfully created one drawing using annotative dims and text - I have set my text to 1:1 scale, height = 30 in paperspace (although I don't get what this refers to when it automatically says it's 30 in modelspace too) and my viewport is 1:20 scale. It's all good, the dims and text look great, which is what I want at the end of the day, however I got there.
But, when I want to set up another detail at 1:40 scale, I can't for the life of me figure out how to make the same dim and text style appear the same size as it was for the 1:20 detail.
I have a drawing that contains texts that are annotative. But I would like to change the scale of the drawing with the floating model space viewport in Paper Space. I know I can individually right click on the text and Add Current Scale to them but is there a way to do so globally?
View 1 Replies View RelatedIm pretty new to annotative text. I was wondering how I can make text show in two viewports at two diffrent scales? Also how to I remove scales from text?
View 2 Replies View RelatedI have a dynamic block that contains both geometry as well as text. I don't want the geometry to scale up based on the drawing scale but I do want the text to scle according to the drawing scale. I have tried making the text both annotative and non-annotative in the block and get the same result. I can get the text to scale properly if I make the entire block annotative but that also scales the geometry which is not accurate.
View 1 Replies View RelatedMy annotative text moves from its original place when I change my viewport scale. I tried to add the PS scale to my original xref, but when I click on the text, I can't change the "no" to "yes" on the options menu where it says annotative.
View 2 Replies View RelatedI am running Autocad arch 2011 (as Autocad 2011) and a co worker is using Autocad electrical 2012 and when he works in a drawing of mine the every annotative scale that is used in the file is attached to every annotative object. Which means I have to go through every object and delete scales that should be be there....all my annotative objects appear in every view port because every annotative object has every scale..
View 2 Replies View RelatedWhere is the “annotative scale” and “paper text height” properties?
I couldn’t find the “annotative scale” and “paper text height” properties when dealing with “Civil 3D” objects such as points and contours the same way we have it in the regular AutoCAD.
For example, suppose that I need to increase to decrease the “text height” of the point label considering a particular “annotative scale” property, then how this kind of thing might be done in the AutoCAD Civil 3D?
Unfortunately, a new project we have does not allow us to use annotative objects, so we are back to switching scale by creating several dimstyles with a varying dimscale (eg. Dim96, for 1/8", Dim48 for 1/4" etc.) Now I have created a button on the tool palette that brings in text and it allows me to set the size of the arrow by matching it to the dimstyle, but the text comes in always at the same size - 9" which is 3/32" for a 1/8" plan. The arrow changes but the text does not. I know I have to change the CANNOSCALE, but I can't seem to figure out a way of making it work so that the user will only need to switch the dimstyle from the pull down up at the top right and then be able to use a tool palette button that will bring in a text with leader with it's arrow head and text height matching the dimstyle scale.
View 4 Replies View RelatedIs there any trick that bring in an annotative block into a drawing at the annotative scale you are working in, not the scale the block was created in?
View 2 Replies View RelatedI am using 2010 and when I am on my sheet or viewing my database through a viewport annotative objects tend to disappear and it happens randomly. It's only a few objects that will disappear while others are shown.
Example: My grid bubbles may disappear, but leaders, text, dimensions, etc are visible.
Another example is door or window tags may disappear while grid, leaders, etc are all shown and when they don't show up they also don't print. Reloading the xref doesn't bring them back also. I have to physically go into the database and make some kind of change (erase a line and than undo; draw a line and than delete it; change a scale, anything); save the drawing and then go to my sheet and reload the xref to get them to come back.
I do not use annotative text very often, for the first time, I need 1/4 inch and 3/4 inch viewports in the same drawing. How do I setup the dims and text to appear correctly in both viewports?
View 7 Replies View RelatedI am really confused on an Annotative Text style issue. I have a blank drawing and i need to set up an annotative text, dimension and multileader style. So i started with the Text Style.
Now i would like the annotative text size to be 2mm, Arial standard. However whenever i try to do this, it changes my 2mm to 3mm which is not what i am after.
Is there some limitation to the font or is this AutoCAD error or am i just trying to do something odd.
I am using the copy and paste clipboard option to bring text into my drawing. The text was annotative at one scale and brought into a new dwg (model space) which had a different annotative scale. When I brought the text in, it came in too small, so I scaled it properly. It did not appear in the paperspace viewport, even thought it was there in model space. I did a properties on the text and it did not allow me to change the texts annotative scale.
View 2 Replies View RelatedI had started placing dimensions in a drawing before I realized that I had to change the scale of the entire drawing.So now I would like to change the annotative scale of an existing dimension style but I am not clear on how to do it.
This would be for any new dimensions that I add.They continue to appear at the old scale. All of the dimensions are correct I would just like to see the dimensioning scaled up to the proper size for the drawing.
I realize that I could just create a new style but instead would really like to know how to change what I am already using.
I have a drawing with several layouts, and in one particular layout only, I want the text to be smaller than the annotation scale would dictate (the viewport is 1"=300', but I want the text to display at 1"=50' annotation scale).
I tried selecting the viewport and changing the "annotation scale" property to 1"=50', then the "standard scale" property to 1"=300'.
Strangely, this seems to work for a bunch of MText objects I have in the drawing, but it won't work for an alignment station label group or for a particular linetype...for some reason, those two things insist on having their annotation scale equal to the viewport scale.
I tried messing around with the alignment station label group's style but couldn't figure anything out. As far as the line/linetype, I'm completely at a loss why that one wouldn't change.
I am a beginner in autocad. What is the difference between annotative and associative text?
View 1 Replies View RelatedI would like to find a lisp that changes the scale of something that has an annotative scale and deletes all other scales in the object scale list. Often i have many different scales of existing dimensions or objects. i waste a lot of time opening the annotation object scale dialogue box, selecting add, finding my scale and deleting the old scale.
View 3 Replies View RelatedI am having trouble getting my Civil3d line labels to adjust with the annotative scale.
View 4 Replies View RelatedI have a co-worker who needs to create a block where the attributes scale with the anno scale, but the block container does not. He's creating a tree block and wants the canopy and trunk attributes to scale without scaling the tree symbol.
Making an attribute annotative and applying the scales to the attributes doesn't seem to work if the block itself isn't annotative.
Are we missing something, or is this just not possible?
I just loaded AutoCAD 2012 on Friday and have noticed that when I use annotative text or mtext in paper space when printing or previewing the text it rotates 90 degrees to vertical, but is horizontal in the drawing. Only does this with annotative text or mtext, non annotative text and mtext remains horizontal when previewing or printing.
View 3 Replies View RelatedI am trying to use annotative scale for the first time. What I am trying to use it for is the following:
I have blocks setup for the legend on our drawings. Say if I hatch a footpath in a drawings, I have a legend item that I insert into paperspace that has a sample of that hatch and the text "Existing footpath". Can I set the annotative scale in paperspace so that no matter what the viewport scale the legend item in paperspace will look similar to it.
When I click the annotative scale icon at the bottom of screen it shows me the standard options to chose from:
(1/16"= 1'-0", 1/8"= 1'-0", 1/4"+ 1'-0" etc. etc..)
but it is permanently stuck in 1/4"=1-0"...
In other words if I select say 1"=1'-0"...and go to draw a dimension...the dimension is in 1/4"= 1'-0"....model space
I've got a problem with a title panel that we've created. We're using a new type font - VAGRounded-Thin - however when in paper space and we zoom in and out the text font enlarges or reduces as we scroll in and out with the mouse wheel.It's still coming out fine when printed [pdf and hardcopy] it's just on the screen.
View 9 Replies View RelatedI created a associative and annotative hatch for a group of objects. It displays fine and the area measures fine. When I switch the annotative scale in the lower right for the whole drawing, portions of the hatch dissapear from the boundary objects - both visually and from the area in properties, When I switch back to original annotative scale, that area is still no longer there. In essense, parts of the hatch get deleted.
AutoCAD LT 2011
AutoCAD Civil 3D 2012