My annotative text moves from its original place when I change my viewport scale. I tried to add the PS scale to my original xref, but when I click on the text, I can't change the "no" to "yes" on the options menu where it says annotative.
View 2 RepliesAnnotative block moves when annotation scale changed,
The solution for this problem is mentioned in the link below but sounds not to be useful:
[URL]....
I got a block that contains an attribute (attached) and created on layer zero while the current annotation scale is 1:100. As this annotation scale is changed (say to 1:200 or 1:50) this block moves from its original place to another one (as shown in the attached screenshots).
I have a drawing that contains texts that are annotative. But I would like to change the scale of the drawing with the floating model space viewport in Paper Space. I know I can individually right click on the text and Add Current Scale to them but is there a way to do so globally?
View 1 Replies View RelatedWhere is the “annotative scale” and “paper text height” properties?
I couldn’t find the “annotative scale” and “paper text height” properties when dealing with “Civil 3D” objects such as points and contours the same way we have it in the regular AutoCAD.
For example, suppose that I need to increase to decrease the “text height” of the point label considering a particular “annotative scale” property, then how this kind of thing might be done in the AutoCAD Civil 3D?
I have a drawing with several layouts, and in one particular layout only, I want the text to be smaller than the annotation scale would dictate (the viewport is 1"=300', but I want the text to display at 1"=50' annotation scale).
I tried selecting the viewport and changing the "annotation scale" property to 1"=50', then the "standard scale" property to 1"=300'.
Strangely, this seems to work for a bunch of MText objects I have in the drawing, but it won't work for an alignment station label group or for a particular linetype...for some reason, those two things insist on having their annotation scale equal to the viewport scale.
I tried messing around with the alignment station label group's style but couldn't figure anything out. As far as the line/linetype, I'm completely at a loss why that one wouldn't change.
I am having trouble getting my Civil3d line labels to adjust with the annotative scale.
View 4 Replies View RelatedIn our office cutlines are made up of polylines. When I use this in an annotative drawing I cannot get the polyline to change with the scale factor. Is there a way to make the polyline annotative?
View 4 Replies View RelatedI have successfully created one drawing using annotative dims and text - I have set my text to 1:1 scale, height = 30 in paperspace (although I don't get what this refers to when it automatically says it's 30 in modelspace too) and my viewport is 1:20 scale. It's all good, the dims and text look great, which is what I want at the end of the day, however I got there.
But, when I want to set up another detail at 1:40 scale, I can't for the life of me figure out how to make the same dim and text style appear the same size as it was for the 1:20 detail.
I have a base plan. The text scale is set to 1"=40' I xref the base plan into a strucural bridge plan sheet and scale the base map x 12 so that i can work in architetural scale. How do I get the text to scale correctly in the xref'd base map that has been scaled by 12 for a 1/8" scale?
View 3 Replies View RelatedIm pretty new to annotative text. I was wondering how I can make text show in two viewports at two diffrent scales? Also how to I remove scales from text?
View 2 Replies View RelatedI have a dynamic block that contains both geometry as well as text. I don't want the geometry to scale up based on the drawing scale but I do want the text to scle according to the drawing scale. I have tried making the text both annotative and non-annotative in the block and get the same result. I can get the text to scale properly if I make the entire block annotative but that also scales the geometry which is not accurate.
View 1 Replies View RelatedI am running Autocad arch 2011 (as Autocad 2011) and a co worker is using Autocad electrical 2012 and when he works in a drawing of mine the every annotative scale that is used in the file is attached to every annotative object. Which means I have to go through every object and delete scales that should be be there....all my annotative objects appear in every view port because every annotative object has every scale..
View 2 Replies View RelatedUnfortunately, a new project we have does not allow us to use annotative objects, so we are back to switching scale by creating several dimstyles with a varying dimscale (eg. Dim96, for 1/8", Dim48 for 1/4" etc.) Now I have created a button on the tool palette that brings in text and it allows me to set the size of the arrow by matching it to the dimstyle, but the text comes in always at the same size - 9" which is 3/32" for a 1/8" plan. The arrow changes but the text does not. I know I have to change the CANNOSCALE, but I can't seem to figure out a way of making it work so that the user will only need to switch the dimstyle from the pull down up at the top right and then be able to use a tool palette button that will bring in a text with leader with it's arrow head and text height matching the dimstyle scale.
View 4 Replies View RelatedI love annotative scaling of objects it is a great feature. I am however having one problem that I'm not sure if I've missed a setting or something. Is there a way to prevent civil 3d from scaling your annotative objects based on the view scale you are looking at? For example if I zoom out (in model space or max viewport) to show my entire drawing and regen, civil 3d scales all my text and blocks to an enomous scale esentially blocking my entire drawing with solid colour. also if I zoom into a small area to do some detail work all my text becomes microscopic and unuseable. This makes adjusting text so it doesn;t overlap other text very difficult if it never appears at the correct size. Is there a way to freeze annotative objects at thier correct scale (for the current viewport scale) so they dont scale simply because you zoom in or out on a drawing?
View 3 Replies View RelatedIs there any trick that bring in an annotative block into a drawing at the annotative scale you are working in, not the scale the block was created in?
View 2 Replies View RelatedI would like to find a lisp that changes the scale of something that has an annotative scale and deletes all other scales in the object scale list. Often i have many different scales of existing dimensions or objects. i waste a lot of time opening the annotation object scale dialogue box, selecting add, finding my scale and deleting the old scale.
View 3 Replies View RelatedThis is issue arises when i have been working on a drawing for a while with multiple xref/data shortcuts. The model space text is all the correct size yet once I enter a layout the annotative text relating to 3D elements such as Alignments/Profile Station/Elevation Labels shrink to 1/25 their size. Other annotative objects such as Mtext and Multileaders are not effected. Attached are before and after pictures.
View 4 Replies View RelatedI am working in Civil 3d 2010. I have annotative text and when I apply background mask the width is huge. Is there a system variable or something else that I need to change so the background will only be masked behind the text and not additional width?
View 7 Replies View RelatedCreated L200 Annotative text in C3d drawing w/ SP1, INSTALLED SP2, working in dwg now I can not move, rotate or erase the text that is annotative (the two scale symbols) appear at every piece of text. I tried making in the STYLE text box toggling on and off "Annotative Text" does not work. Also did -purge Regapps, still can not edit text.
View 7 Replies View RelatedApparently text will always rotate about the bottom left grip and not the justified grip.
This is a massive issue that makes this great feature virtually worthless.
If the text is going to rotate in multiple viewports you need it to stay in the same place!
I am trying to use annotative scale for the first time. What I am trying to use it for is the following:
I have blocks setup for the legend on our drawings. Say if I hatch a footpath in a drawings, I have a legend item that I insert into paperspace that has a sample of that hatch and the text "Existing footpath". Can I set the annotative scale in paperspace so that no matter what the viewport scale the legend item in paperspace will look similar to it.
When I click the annotative scale icon at the bottom of screen it shows me the standard options to chose from:
(1/16"= 1'-0", 1/8"= 1'-0", 1/4"+ 1'-0" etc. etc..)
but it is permanently stuck in 1/4"=1-0"...
In other words if I select say 1"=1'-0"...and go to draw a dimension...the dimension is in 1/4"= 1'-0"....model space
I am trying to scale an object by draging the corners but my bounding box moves as a group and I can't scale it. the txt has been outlined, my bounding box is set to "show"... I am using a MAC and Illustrator CC.
View 4 Replies View RelatedI have this complex section of an architectural project, which is drawn at 1:1 scale (obviously). It has lots of constructive details, however i've made lots of layers and everything is under control.However, as I started to hatch the drawings, i was having big problems at using the same drawing for different scales, because non-annotative hatches also change their size with different scales.
So I began trying annotative, and i did it as i read in several how-tos. I made an hatch in the layout to know the perfect scale for the hatch, then applied that scale in model hatches. Then, in properties, I selected the scales at which that hatch should belong. Until here everything was OK!
However, as the ideal scale for the hatches (ANSI31) was something like 0.0003, here started the problems. The layout has an erratic behavior with similar hatches (I even tried to use match props to be sure different hatches had the same properties). On different viewports, some of the hatches appear as solid, and they plot just like that! As I zoom in and zoom out, the problem changes, as problematic viewports become right and others become wrong.
I tried to change HPmaxlines to 10000000, i tried to change the size of ansi31 in acad.pat, however the problem persists. It seems that the problem disappears when i have increase the hatch scale to, lets say, 0.05, however it's not that scale I want because of the presentation...
I created a associative and annotative hatch for a group of objects. It displays fine and the area measures fine. When I switch the annotative scale in the lower right for the whole drawing, portions of the hatch dissapear from the boundary objects - both visually and from the area in properties, When I switch back to original annotative scale, that area is still no longer there. In essense, parts of the hatch get deleted.
AutoCAD LT 2011
AutoCAD Civil 3D 2012
SUBJECT: Annotative Scales.
I have a drawing with a 2 viewing ports
Port 1 is at 1/4"= 1'-0"
Port 2 is at 1/2"= 1'-0"
What should my Annotative setting be in model Space?
I have a drawing (attached) with the following settings: LTSCALE = 1, MSLTSCALE = 1, PSLTSCALE = 1.For some reason the linetype is not scaling based on the annotative scale. It will update correctly if I change the LTSCALE but for some reason it wants to ignore the MS and PSLTSCALE variables.
As a note, the drawing was converted from a Microstation drawing and the linetype is a converted Microstation linetype.Is there something in the linetype that is doing this.
I am rather new to AutoCAD 2010, and have observed issues with Annotative Scale. I have tried to avoid that function like the plague, but now I have some time to learn of it and its power.
I've been tasked with creating/updating Electrical Department symbol blocks. Right now, I am working on lighting fixture blocks, and I have this particularly odd scenario when i'm making the Block Attributes. My new block is for a 2 foot by 4' lighting fixture. When this block is to be inserted in Model Space, the size will always remain constant (2'x4'), but I need the Attributes (one for the Fixture Type, and one to denote the Circuit Number and Switch leg) to change sizes per the plan scale on Paper Space.
How, and in which space, should I construct my light fixture block & attributes? And, which parts of the block or attributes should be Annotative? Also, the light fixture can be either oriented vertically or horizontally. Will I still be able to relocate the attribute using -EATTEDIT or -ATTEDIT?
I seem to have lost the ability to add or remove an annotative scale for a single item (piece of text, block etc). I've always picked the annotative scale in the properties box and then hit the box at the right which brought up a small dialogue box where I could add or remove scales for the item that I'd highlighted. When I hit that box now, or the similar box in the right click menu nothing happens. AutoCAD acts like the box is present, but it isn't. The right click option of remove current scale doesn't work either as it seems to remove the scale from multiple items.
I have recently gone from two monitors to one (it's a real bummer). Is it possible that the dialogue box is open somewhere I can't find it? I have hit the show desktop button and it isn't there.
I am attempting to create an AutoLISP that removes all un-used drawing scales from a file, then adds the standard scales used in civil engineering. This is what I tried using:
;;;Add Engineering Scales
(defun C:AES ()
(command ".CANNOSCALE"
"1" = 1'"
(command "-scalelistedit"
[code]...
Now, I am only a beginner to writing LISP, but I know that my problem is that it is reading the inch marks after the one in the scale name as a enter, but I don't know how to get around this. Also, I don't know how to get it to skip scales that are still in the drawing.
Im trying to keep annotative blocks in the same spot on different scale viewports. The main issue Im having is, when i have a lets say house plan in viewport #1 and have all my blocks in place that I moved copyed from my template. When I open another viewport at a diffrent scale the blocks move. Im useing a large number of blocks for electrical symbols we use at work that I need to be in every viewport so we can copy them and place them where needed on the plan.
View 3 Replies View Related