AutoCAD Civil 3D :: Adjusting Annotative Scale Is Not Adjusting Label Text Size
Mar 30, 2012I am having trouble getting my Civil3d line labels to adjust with the annotative scale.
View 4 Replies
ADVERTISEMENT
AutoCad 2D :: Adjusting Dimension Scale To Match Blocks And Objects In Drawings
Sep 13, 2011I am having some trouble adjusting the dimension scale to match blocks and objects in my drawings.
View 1 Replies View RelatedAutoCad :: Adjusting Size Of Nodes?
Aug 24, 2011Where do I go to adjust the size of my nodes? My dots are displaying as very large circles aith a line through the center.
View 3 Replies View RelatedAutoCAD 2013 :: 2014 Adjusting Aperture Size?
Dec 11, 2013The aperture size cannot be modified using the sider under options. Workaround seems to be to use the system variable “pickbox”. Occasionally it seems to also display as a rectangle instead of a square, obvious when variable is set below 10 (however, this seems to be one of those intermittent problems / might be a stand-alone graphics problem).
I've got SP1 installed.
AutoCAD Civil 3D :: Adding A Scale To Annotative Text
Aug 15, 2013I have a drawing that contains texts that are annotative. But I would like to change the scale of the drawing with the floating model space viewport in Paper Space. I know I can individually right click on the text and Add Current Scale to them but is there a way to do so globally?
View 1 Replies View RelatedPhotoshop :: Adjusting Size Of Image For Printer
May 5, 2005If I have an image that's too big to fit on the printer page, how do I set my printer settings to adjust the image to the right size (i.e. without scaling the image manually)?
View 2 Replies View RelatedAutoCAD Civil 3D :: Annotative Text Moves When Change PS Scale
Sep 10, 2013My annotative text moves from its original place when I change my viewport scale. I tried to add the PS scale to my original xref, but when I click on the text, I can't change the "no" to "yes" on the options menu where it says annotative.
View 2 Replies View RelatedPhotoshop :: Adjusting Size Produced With Marquee Tool?
Mar 7, 2012When I use the marquee tool to draw a shape - circle/square etc I sometimes don't get the size exactly to my requirements. is there a way to fine tune the produced size? I'm assuming that there is some combination of keys that will allow me to make fine adjustments up or down to the size of the shape. How to do this without closing down and starting again and again until I get what I require?
View 2 Replies View RelatedPhotoshop :: Adjusting Window Size For Filters Gallery
Jan 17, 2008I am having diffuculties with my "Filters Gallery" window. Whenever it comes up, it cuts off some parts of the tools in the Filters Gallery. For example, if I wanted to give my image the "Plastic Wrap" filter, on the right side I only see half of the Highlight Strength, Detail and Smoothness adjustment bars, I can't see the little boxes where you enter numbers for the adjustment bars and only half of the Ok and Cancel buttons on the top of the window. When I try to adjust the window size by using the little black arrows that come up when you put your cursor on the edges of the window, it will only let me make the window longer, not wider. How can I make everything visible in my Filters Gallery window?
View 2 Replies View RelatedAutoCAD Civil 3D :: Stretching / Adjusting Contours
Oct 28, 2013We are currently STILL in the transition from LDD to Civil 3D 2013. Is there an easy way to stretch the contours within a surface without physically editing the surface. Right Now, I have a couple contours that have have spikes in them from lack of survey data. The Problem is that if I don't change the contours, I have to show steep slopes between them which I would rather not do.
Do I have to keep editing the surface to try and resolve this problem or is there a way I can just stretch the contours?
Right now I resolved the problem by coping the surface, exploding it and putting the contours on a different layer so that I can stretch them as I see fit But this is not a time effective solution.
AutoCAD Civil 3D :: Adjusting Surface Boundary
Jun 18, 2012I need to adjust a surface boundary. I need to remove a corrupted area in my surface. I do not need it. Is there any way to drag a boundary so I can exclude some of my contour area? Is there a command under settings on tool space that I may have overlooked? This surface was furnished by a client so I do not want to rebuild or alter except to exclude some contours.
View 1 Replies View RelatedAutoCAD Civil 3D :: Where Is The Annotative Scale And Paper Text Height Properties
Mar 15, 2012Where is the “annotative scale” and “paper text height” properties?
I couldn’t find the “annotative scale” and “paper text height” properties when dealing with “Civil 3D” objects such as points and contours the same way we have it in the regular AutoCAD.
For example, suppose that I need to increase to decrease the “text height” of the point label considering a particular “annotative scale” property, then how this kind of thing might be done in the AutoCAD Civil 3D?
Photoshop :: After Adjusting White Balance In ACR - Images Opening At Different Size?
Nov 6, 2013After adjusting white balance in ACR - images are opening in PS at a different size? how to prevent it?
Negatives are scanned at 3200dpi, and 24bit depth. This is the metadata from Bridge.
Default settings in Camera Raw After opening in Photoshop.
CorelDRAW Graphics Suite X5 :: Adjusting Size Of Outline Contour
May 14, 2011URL....On that image, I want to adjust the tickness of the thin white line.There is only 1 contour step.
View 2 Replies View RelatedPhotoshop :: Keeping Rounded Rectangle's Radius When Adjusting Its Size
Aug 5, 2005how I could keep the same radius of a rounded rectangle, when I'm adjusting the size of the rectangle. if you treat it like any other object, your radius will grow/decrease along with your rectangle.
View 2 Replies View RelatedPaint Shop Pro :: Adjusting Photograph (new Layer) To Default Image Size
Dec 20, 2011I created a image (with blank background) with dimensions 640 x 480 (its my default working image).
I have copied photograph with dimensions 7300 x 4200 and pasted as new layer on the image (640 x 480). Obviously, the pasted photograph is bigger and it couldn't be showed totally. I am adjusting the size of the photograph manually, dragging and dropping its corner lots of time.
I tried to use "image => resize" / "image => canvas size". But it just act on my default image (640 x 480), not the photograph (even when its layer is selected).
So, is there any way of resize the photograph automatically to fit in the default image (640 x 480)?
AutoCAD Civil 3D :: Adjusting Intersections Secondary Road Profile
Jul 9, 2013I went forward designing intersection profiles with limited survey and simply made an educated guess for the secondary roads pgl tie in point. I have received updated survey and when I move the profile end point to meet existing grade it adds another pvi effectively holding the profile grade I set preliminarily. I'm keeping the lock point. Is there something with the return/ offset profiles preventing this edit? What is the proper work flow?
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
AutoCAD Civil 3D :: Adjusting Cross Section Placement In View Frames
Apr 4, 2013Any way to adjust the placement of my cross sections after i created my view frames? As you can see from the image attached i have extra room on the bottom of my sheet and my first cross section is not completely on the page. Some of my view frames are correct and others are not. Can this be adjusted per sheet?
View 1 Replies View RelatedAutoCAD Civil 3D :: Certain Annotative Text Shrinks To 1/25 Its Size In Viewport
Jul 19, 2013This is issue arises when i have been working on a drawing for a while with multiple xref/data shortcuts. The model space text is all the correct size yet once I enter a layout the annotative text relating to 3D elements such as Alignments/Profile Station/Elevation Labels shrink to 1/25 their size. Other annotative objects such as Mtext and Multileaders are not effected. Attached are before and after pictures.
View 4 Replies View RelatedAutoCAD Civil 3D :: Annotative Text Background Mask Size?
Jun 14, 2010I am working in Civil 3d 2010. I have annotative text and when I apply background mask the width is huge. Is there a system variable or something else that I need to change so the background will only be masked behind the text and not additional width?
View 7 Replies View RelatedAutoCAD Civil 3D :: Making Annotative Scale Different From Viewport Scale
Nov 8, 2013I have a drawing with several layouts, and in one particular layout only, I want the text to be smaller than the annotation scale would dictate (the viewport is 1"=300', but I want the text to display at 1"=50' annotation scale).
I tried selecting the viewport and changing the "annotation scale" property to 1"=50', then the "standard scale" property to 1"=300'.
Strangely, this seems to work for a bunch of MText objects I have in the drawing, but it won't work for an alignment station label group or for a particular linetype...for some reason, those two things insist on having their annotation scale equal to the viewport scale.
I tried messing around with the alignment station label group's style but couldn't figure anything out. As far as the line/linetype, I'm completely at a loss why that one wouldn't change.
AutoCAD Civil 3D :: Modifying The Point Size / Text Size Assigned At Particular Annotation Scale
Feb 25, 2013Modifying the point size/text size assigned at particular annotation scale,
I’m wondering how the point size/text size assigned at particular annotation scale can be modified.
For example, in the attached screenshot, the point size assigned at the annotation scale of 1/1000 is big and I wanted to make it a bit smaller at that scale.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD Civil 3D :: Section View Label Text Size In Paper Space
Sep 11, 2013When I use a layout size such as A3 in paper space, the section view label text size is the same as it is in model space (when both annotative scales are the same). However, when I choose 11x17 as a layout size, the section view label text size is exetremly small.
View 2 Replies View RelatedAutoCAD Civil 3D :: Label Styles Annotation Scale Versus Viewport Scale?
Jun 26, 2009am in the process of setting up a standard file for all designers to use our local office. This file will have most of the styles created for profiles, alignments, surfaces, profile views, etc... as mostly specified by the customer and industry standards.
I am having trouble maintaining the correct annotation scale in the viewport in paperspace and when plotting.
The attached word document has 3 figures. Fig 1 shows the correct viewport scale and correct annotation scale. Fig 2 shows how the annotation scale abruptly changes during the plotting process. This abrupt annotation scale change sometimes happens during the regen process or when I switch from layout to model space and back to layout.The annotation scale goes from 1:1 to 1:40 just as in the viewport. This change in annotation scale is not supposed to happen because I want to preserve a certain plotting height for my text versus a viewport scale by using various annotation scales.
I have researched the procedures for annotation scale and have not found any info related to this "abrupt change in annotation scale".
Curiously , this abrupt change in annotation scale does not happen if the text does not belong to any styles within Civil 3D. Stand alone text stays at the correct annotation scale and is not affected in the same way.
AutoCAD Civil 3D :: Label Style Text Size As Percent Of Screen (model Space)
Jun 17, 2013I've been tinkering with text sizes in model space and would like to have my point numbers consistent regardless of zoom factor. I can do this in paper space (viewports) as the annotative scale controls the appearance, but for doing analysis of points at various zooms in model space, it would be nice to be able to Regen and have them all come to a certain text size.
I've made some expressions that are modifications of those I use in paper space, but I can't seem to find a function/variable that I can reference for this purpose.
AutoCad :: Viewport Scale And Annotative Text?
Mar 16, 2012I have successfully created one drawing using annotative dims and text - I have set my text to 1:1 scale, height = 30 in paperspace (although I don't get what this refers to when it automatically says it's 30 in modelspace too) and my viewport is 1:20 scale. It's all good, the dims and text look great, which is what I want at the end of the day, however I got there.
But, when I want to set up another detail at 1:40 scale, I can't for the life of me figure out how to make the same dim and text style appear the same size as it was for the 1:20 detail.
AutoCAD Civil 3D :: Point Label Size Change When Label Is Moved?
May 8, 2012The label associated to a grading point when is moved when is moved changes its size automatically and a leader appears. After this happen no control over the grading point and its associate label. refer to the image below.
View 1 Replies View RelatedAutoCAD 2010 :: (annotative) Scale Of Xrefs Text?
Jan 4, 2013I have a base plan. The text scale is set to 1"=40' I xref the base plan into a strucural bridge plan sheet and scale the base map x 12 so that i can work in architetural scale. How do I get the text to scale correctly in the xref'd base map that has been scaled by 12 for a 1/8" scale?
View 3 Replies View RelatedAutoCad 2D :: Adding / Removing A Scale To Annotative Text?
Jul 30, 2012Im pretty new to annotative text. I was wondering how I can make text show in two viewports at two diffrent scales? Also how to I remove scales from text?
View 2 Replies View RelatedAutoCAD Dynamic Blocks :: Annotative Text - Drawing Scale
Jul 14, 2011I have a dynamic block that contains both geometry as well as text. I don't want the geometry to scale up based on the drawing scale but I do want the text to scle according to the drawing scale. I have tried making the text both annotative and non-annotative in the block and get the same result. I can get the text to scale properly if I make the entire block annotative but that also scales the geometry which is not accurate.
View 1 Replies View RelatedAutoCAD LT :: Weight Not Adjusting In Paperspace
Jan 30, 2012Trying to change the ltweight settings in paperspace but nothing is working!
View 9 Replies View Related