The aperture size cannot be modified using the sider under options. Workaround seems to be to use the system variable “pickbox”. Occasionally it seems to also display as a rectangle instead of a square, obvious when variable is set below 10 (however, this seems to be one of those intermittent problems / might be a stand-alone graphics problem).
I changed my aperture size but for some reason it didn't take. it is still small. Even if I go back into options it shows the larger size but doesn't take affect. Of by the way the Autosnap marker size got larger.
i am trying to reduce the sensitivity of osnaps by changing the aperture. However, no matter how big or small I make the setting, my snaps are still way too sensitive. I can move my crosshairs across a whole line that's 48 inches long and I can only snap to an endpoint or midpoint (I want to just snap somewhere along the line). I have tuned on the option that shows the aperture, and it's definitely changing astetically, however the behavior of osnaps have not changed
I have been migrating dozens and dozens of .pat files from one version of AutoCAD to the next for many, many versions. Most recently in AutoCAD 2013 the .pat files were stored in the C:Program FilesAutodeskAutoCAD 2013SupportPatterns - worked fine. During the migration to 2014 I received an install error report stating that this subdirectory did not exist and could not be created. Alternately it stated that the new default path C:UsersUsernameAppDataRoamiongAutodesk|AutoCAD 2014R19.1enuSupport will be used instead.
At first I created the Patterns subdirectory where it could not be done automatically. No luck. Then I placed the Patterns subdirectory in C:UsersUsernameAppDataRoamiongAutodesk|AutoCAD 2014R19.1enuSupportPatterns and no luck.
Happens every year. Upgrade and spend half a day or more trying to get everything back to the way I had it. All I have is a couple small toolbars for commands that are several clicks deep in the ribbons and I want them "right there" all the time.
I thought Autodesk 360 might be a good tool for this. All it did was DOWNLOAD some old settings and destroy one of the toolbars I'd created. They really need an override in there to specify upload, download, overwrite or don't.
I'm trying to migrate (I guess that's the technical term) my settings from 2013 Mechanical to 2014 Mechanical. It's probably too late already, after 360 did its deal, but I really want to get this down so we don't go through it every year anymore.
I maintain that PTC had this part of it down Pro/ENGINEER. You had a config file that was editable plain text.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014 Dell Precision T1650 Windows 7 Professional SP1 64-bit Intel E3-1270 V2 3.5GHz / 32G RAM Nvidia Quadro 2000, Driver 331.82 Space Navigator, Driver Version 6.17.7
If I have an image that's too big to fit on the printer page, how do I set my printer settings to adjust the image to the right size (i.e. without scaling the image manually)?
When I use the marquee tool to draw a shape - circle/square etc I sometimes don't get the size exactly to my requirements. is there a way to fine tune the produced size? I'm assuming that there is some combination of keys that will allow me to make fine adjustments up or down to the size of the shape. How to do this without closing down and starting again and again until I get what I require?
I am having diffuculties with my "Filters Gallery" window. Whenever it comes up, it cuts off some parts of the tools in the Filters Gallery. For example, if I wanted to give my image the "Plastic Wrap" filter, on the right side I only see half of the Highlight Strength, Detail and Smoothness adjustment bars, I can't see the little boxes where you enter numbers for the adjustment bars and only half of the Ok and Cancel buttons on the top of the window. When I try to adjust the window size by using the little black arrows that come up when you put your cursor on the edges of the window, it will only let me make the window longer, not wider. How can I make everything visible in my Filters Gallery window?
how I could keep the same radius of a rounded rectangle, when I'm adjusting the size of the rectangle. if you treat it like any other object, your radius will grow/decrease along with your rectangle.
I created a image (with blank background) with dimensions 640 x 480 (its my default working image).
I have copied photograph with dimensions 7300 x 4200 and pasted as new layer on the image (640 x 480). Obviously, the pasted photograph is bigger and it couldn't be showed totally. I am adjusting the size of the photograph manually, dragging and dropping its corner lots of time.
I tried to use "image => resize" / "image => canvas size". But it just act on my default image (640 x 480), not the photograph (even when its layer is selected).
So, is there any way of resize the photograph automatically to fit in the default image (640 x 480)?
In my AutoCAD 2014, after selecting a grip on an object or a point it will snap to other grip points even when osnap is turned off. Is there a command or variable to turn what appears to be an auto grip snap function off?
I'm a student at lone star college in houston, and I'm working on a set of piping plans in autocad 2013. I just downloaded a student version of autocad 2014. I wanted to know if I can work on my plans in both the 2013 and 2014 versions without any hiccups or issues.
i made some 3d modelling in autocad 2014 in the 3d drawing mode but i have some difficulty in modifying the dimensions of the subobjects.
1 method that i already know is to use the scale gizmo which works but not much as i am not able to set the exact dimensions i need. it only scales the subobject according to the previous size.
modify and determine the exact dimensions of the sub-objects.
My instructor taught us to attach images with materials rendering tool to add jpegs to our 3d modelling. Every time I try to use it, it stretches my image to nothing but horizontal lines and despite trying to modify it with the texture editor it eventually colllapses the autocad. Here is my error number. CER_83372936
I have problem with compatibility this two versions of civil 3D. Files created in C3D 2013 then modified in 2014 don't want to open in C3D 2013. Files contain many civil objects: shortcuts, corridors. During opening occurs fatal error.
There is no problem with files which were created in C3D 2014 from the begining only modified in C3D 2014.
I'm running AutoCAD 2014 (part of AutoCAD Structural Detailing 2014), & it occasionally freezes on me. I haven't figured out how to reproduce it regularly yet, but it is somewhat predictable. When I run a list routine that opens a dialog box, if I press Escape immediately after the dialog box appears, AutoCAD quits responding & I have to force it to close with the task manager. It doesn't always happen, but it has become a semi-regular event. I've previously used AutoCAD 2010 Mechanical & AutoCAD 2012 (part of Structural Detailing 2012) before with the same routines on this machine with no issue.
Computer Specs:
Dell Inspiron 560
Windows 7 Professional x64
Pentium E6700 3.2 GHz
4GB RAM
NVidia GeForce 8400GS
AutoCAD 2014 doesn't seem to be noticably more resource intensive than 2012 was, so I don't think that's my issue. I'm just trying to make a habit of saving more often & not accidentally running the wrong command.