AutoCAD 2013 :: Reduce Sensitivity Of OSnaps By Changing Aperture?
Jul 26, 2013
i am trying to reduce the sensitivity of osnaps by changing the aperture. However, no matter how big or small I make the setting, my snaps are still way too sensitive. I can move my crosshairs across a whole line that's 48 inches long and I can only snap to an endpoint or midpoint (I want to just snap somewhere along the line). I have tuned on the option that shows the aperture, and it's definitely changing astetically, however the behavior of osnaps have not changed
View 2 Replies
ADVERTISEMENT
Nov 28, 2012
I prerfer to use my Wacom pen/tablet (wide A5 size; almost A4 in landscape mode) when working in LR4 but I find it far too sensitive when working in the Develop module. For example the smallest movement I am able to make with the pen can change exposure by 0.2 (EV, I assume). which can make a very big difference to the image. Even the action of lifting the pen off the tablet, having 'set' a value, causes the value to change by an unacceptable amount.
Surely this is not how it should work, is it? I am having to use keyboard input to enter values to get what I want.
View 2 Replies
View Related
Apr 13, 2013
I'm facing a very weird problem with circle and interception osnaps. Maybe I'm wrong, but I've a space between the osnaps interception and the the circle line (pointer) when I'm trying to move it to the bottom or top line.
The problem doesn't occur with line. The osnap will go directly to the interception, but with the circle, I just can't understand... It's currently messing my drawing up, as I'm trying to move the circle tan point to another interception.
Here is the screenshots with only interception snap checked (working in milimeters if it does matter):
Well, seems it does occurs with all the snaps too, tested it with "nearest" too, and look how descaled it is:
View 2 Replies
View Related
Dec 11, 2013
The aperture size cannot be modified using the sider under options. Workaround seems to be to use the system variable “pickbox”. Occasionally it seems to also display as a rectangle instead of a square, obvious when variable is set below 10 (however, this seems to be one of those intermittent problems / might be a stand-alone graphics problem).
I've got SP1 installed.
View 4 Replies
View Related
Jun 21, 2012
I really like the object snap tracking feature to snap between 2 points intersecting but I find it overly sensitive and hard to get it right the first time.
Is there a way to turn down the sensitivity? I use this feature frequently.
View 1 Replies
View Related
Dec 17, 2012
I have some really large blueprints (black and white). Some of them exceed 30000 x 8000 in size. I want to reduce the overall size of these but when I try this my image gets really fuzzy. Is there a way to make these images smaller without messing up the clarity?
View 7 Replies
View Related
Mar 21, 2013
when i bind the xref's the file size is increasing up to 50mb. the size of the file before binding is 4.5mb. i tried all the options whic ppl given in the discussion here. purged(all regeapps,zero txts etc.),wblock even some lisps. but all in vain. even i tried to audit but it took 2hrs and nothing happened. this dwg containing only lines poly lines, blocks, txts etc. no images and not even dence hatches also. 1500 drawings like this. i have to submit the softcopy soon.
View 8 Replies
View Related
May 10, 2011
every now and then i keep setting up my Osnaps. is there a permanent setting on Osnaps? or did i mess something in my CAD system?
View 6 Replies
View Related
Aug 25, 2006
have finished loading 2007 onto them.Now, back with 2006 we could set osnaps to the function keys (e.g. F2 to snap to END). I have been told that you can't do this with 2007.
View 9 Replies
View Related
Apr 1, 2013
I am using education version of Autocad 2012 and have only around 2 gig of RAM. Whilst drawing , mainly in 3d my osnaps do not seem to work properly. In a lot of cases it is only the "nearest" snap that works. Sometimes I get no snaps when I think there should be plus I get a bunch of tiny green crosses around where I want to snap. Could my lack of RAM be causing this ?
View 4 Replies
View Related
Mar 27, 2013
So my co-worker says everytime he opens up a drawing, all of his osnaps are on. He turns them off and reopens the drawing, and they are back on. Before I go down stairs to see what the problem is.
View 9 Replies
View Related
Apr 23, 2012
URL....Constantly in 12 and 09 I have had issues snapping to endpoints since the changes to osnaps in ACad itself. It doesn't seem the ramifications were followed thru to ACA.
They seem to have addressed some issues in 12 but not all and often it dails completely.As osnaps is a basic functionality I think Adesk needs to get this working properly and as a fix for 10,11,12 and 13.
View 4 Replies
View Related
Sep 3, 2013
I had some problems with Osnaps that thery are imprecise!
When draw lines in 2d and zoom in to draw things are more detail, then the osnaps show double, and even worse if I import a block and the block places in a different place than the osnap shows.
View 4 Replies
View Related
Feb 15, 2013
Trying to change the color of a layer in a viewport (different than the default layer color (i.e. model layer color)). Objects are set to bylayer. Changing the VP color in the layer dialog brings up the color dialog, select a different color, click OK and the VP Color DOESN"T change in the layer dialog. It stays at its previous color. Occurs on several machines.
View 9 Replies
View Related
Apr 11, 2012
What would cause Osnaps to stop working on 2D section linework?
View 1 Replies
View Related
Nov 21, 2013
I changed my aperture size but for some reason it didn't take. it is still small. Even if I go back into options it shows the larger size but doesn't take affect. Of by the way the Autosnap marker size got larger.
View 4 Replies
View Related
Jun 4, 2013
I recently saw a demonstration of a new software feature to AutoCAD 2014 that enables a pdf to be converted to dwg format by sketching the lines over the pdf underlay. I cannot remember what the software feature was called.
View 8 Replies
View Related
Feb 23, 2012
My aperture / crosshairs seems to have a magnetic attraction to all objects in drawings. Over an empty area, motion is smooth. When crossing over any object(s), be they in Model Space or a Layout, the cursor is attracted to objects. Is this an AutoCAD setting that I'm not aware of, or is this a graphics card / hardware acceleration issue?
View 6 Replies
View Related
Mar 26, 2013
I'm working on a project that a coworker already started but he drew walls as 200mm thick polylines and he wants them changed to be two lines set 200mm offset of each other. He thinks there is an easy command to do this.
View 3 Replies
View Related
Sep 7, 2013
I am importing a JPEG of my logo into AutoCAD 2014 and the colors of the text are changing.
View 9 Replies
View Related
Jul 23, 2012
Is there a way to change a drawing in AutoCad 2012 or 2013 from Michigan Georef to State Plane? Any converter calculator, an add on,etc?
View 2 Replies
View Related
Apr 26, 2013
Is there a way to change the layout tab name to match an attribute in the drawing? For example, I have a block in my title block named REV and an attribute in that black named RevNum, I want my users to be able to edit that block and the layout tab automatically change to match, i.e. if they modify the RevNum attribute to be A i want the layout tab name to change to A. I want this to be transparent to my users normal workflow.
View 2 Replies
View Related
Oct 12, 2012
We just upgraded to 2013 software and anytime i change the ribbon to anything besides the default Inventor crashes.
View 9 Replies
View Related
Jan 23, 2013
I have a Block that represent a point and has an attribute in order to label the point that I am displaying. According to the scale I can change the size of the point itself but I am having problems changing the size of the Atribute in order to make the label readeble in the scale that I have in drawing. How is possible to chage the Text size of my attribute in the point block so I can read the labels easily?
View 9 Replies
View Related
Jan 2, 2013
Every time I change views in 2013, new layers added to the drawing turn off. How do I stop this? The active layer also defalts to the active one I started with.
View 1 Replies
View Related
Jun 26, 2013
I am going through an architectural background, converted over from Revit. I have to go through and routinely burst the object, then qselect, choose what is not equal to bylayer, and change to bylayer.
I don't want to burst everything, making a monster out of the file, but going into every individual block to change the colors within the block to bylayer is also extremely time consuming.
Is there an easier way? maybe a wishlist item for ACAD 2014 to include objects within blocks, when using QSE?
View 6 Replies
View Related
Feb 11, 2013
I'm having a bit of trouble getting my polygon closed without changing the dimensions of the polygon.The drawing attached or at URL....
However I do not know the radius of the angles A, B and C. I know that all the lines have to be the dimensions marked.
Can Autocad automatically bend the angle say, at A without changing the dimensions in order to complete the polygon? I tried this URL.... but found it wasn't what I wanted.
View 4 Replies
View Related
Oct 26, 2012
We need to xref a drawing with a different unit. When I go into the drawing file I want to xref and use the "-DWGUNITS" command I change it from feet to inches and use Architectural. Answer yes to all questions and certain objects disappear. Most of the objects are pline or spline objects. Here is what I see in the AutoCAD Text Window:
Scaling failed for: <AcDbZombieEntity FD3C>
Scaling failed for: <AcDbZombieEntity FD3E>
Scaling failed for: <AcDbZombieEntity FD3F>
Scaling failed for: <AcDbZombieEntity FD41>
Scaling failed for: <AcDbZombieEntity FD42>
Scaling failed for: <AcDbZombieEntity FD44>
Scaling failed for: <AcDbZombieEntity FD45>
Scaling failed for: <AcDbZombieEntity FD47>
Scaling failed for: <AcDbZombieEntity 1956F>
Scaling failed for: <AcDbZombieEntity 19570>
There a lot more of scaling failed messages. too many to show. How can I xref in these drawings with different units without objects disappearing?
View 2 Replies
View Related
Dec 2, 2013
changing some properties default value for 2 items i have here. I want to keep the new settings inside my dwg template but i don't find any why to do it yet.I have to modify these manually or use match properties.
THE TEXT: Has the first picture, i would like to keep the setting Line Space Style: "Exactly" instead of "at least" all the time, each time i open a new autocad. How can i modify this default value? is there a way to do it ?
THE LEADER: Has the picture, in my dimension style i use 2 mm standard closed filled arrow. BUT i like to use the "dot" style sometimes but i like to use the dot at 1 mm not 2 mm.
Is there a way to set individually each type of leader tip size ? With dimension style override it's not working for now..Or maybe if i could change the default properties value for the particular dot in a configuration file?
View 8 Replies
View Related
Feb 15, 2013
how do i change the text and entities from Black to Red after the WBlock has been inserted into a new drawing and exploded.
View 9 Replies
View Related
Nov 1, 2012
Just as of a week ago, it was brought to my attention that my publish stamp has changed to "C:usersjoshuaappdatalocal empacpublish_3412Gi1.dwg" (for example) even thou the location on the drawing I am working on is located on a server, which is normally H:/...../.../...../ Could this be from a adobe pdf driver? I dont know what changed this,
View 1 Replies
View Related
