AutoCAD 2013 :: Changing The Colors Of Objects Within Blocks?
Jun 26, 2013
I am going through an architectural background, converted over from Revit. I have to go through and routinely burst the object, then qselect, choose what is not equal to bylayer, and change to bylayer.
I don't want to burst everything, making a monster out of the file, but going into every individual block to change the colors within the block to bylayer is also extremely time consuming.
Is there an easier way? maybe a wishlist item for ACAD 2014 to include objects within blocks, when using QSE?
View 6 Replies
ADVERTISEMENT
Jun 13, 2012
When I type in the command "SC" for scaling the object, it'll asks me to specify base point then I can enter what scale I want it to be, such as 2 times or 0.5 for half sacle.
with the new 2013 version, sometimes it'll exit the command if I select the insertion point of the block or if the object is at the 0,0,0 location of the drawing. it'll also give a message of "the scaling factor is too small". But I haven't enter what scale I want to scale the object yet.
View 1 Replies
View Related
Sep 26, 2012
Our office created a library of blocks for use in our dwgs in the early days of Autocad. Since installing MEP2013 when inserting the blocks many of them have mysteriously changed from inches to millimeter units. We have to go back to each block(dwg) and change the units and rescale the blocks. We upgraded from MEP2012 and they were working fine.
View 4 Replies
View Related
Dec 3, 2012
Everytime we insert a block from our library, a message pops stating:
"This application has detected a mixed version of AEC objects participating in this operation.
Newer AEC objects will be disallowd from participating in this operation."
I already converted all blocks to AutoCAD with Exploded AEC Objects, but the message persists.
View 2 Replies
View Related
Oct 26, 2012
We need to xref a drawing with a different unit. When I go into the drawing file I want to xref and use the "-DWGUNITS" command I change it from feet to inches and use Architectural. Answer yes to all questions and certain objects disappear. Most of the objects are pline or spline objects. Here is what I see in the AutoCAD Text Window:
Scaling failed for: <AcDbZombieEntity FD3C>
Scaling failed for: <AcDbZombieEntity FD3E>
Scaling failed for: <AcDbZombieEntity FD3F>
Scaling failed for: <AcDbZombieEntity FD41>
Scaling failed for: <AcDbZombieEntity FD42>
Scaling failed for: <AcDbZombieEntity FD44>
Scaling failed for: <AcDbZombieEntity FD45>
Scaling failed for: <AcDbZombieEntity FD47>
Scaling failed for: <AcDbZombieEntity 1956F>
Scaling failed for: <AcDbZombieEntity 19570>
There a lot more of scaling failed messages. too many to show. How can I xref in these drawings with different units without objects disappearing?
View 2 Replies
View Related
Sep 30, 2013
I need to export many library elements (conveyors) which are saved in individual blocks to mass objects. I need to convert them to IGES after that.
Until now I have to open every single block and convert all of it to a mass element. This simply takes too long.
Is it possible to write a small script or program which converts all blocks or the selected blocks to mass elements?
- 2500K @ 4.2Ghz- 8GB - Radeon7970 -
- Xeon 1230V2 @ stock Ghz- 32GB - Quadro 2000 -
View 7 Replies
View Related
Jun 26, 2013
I have a project with many different blocks of text, and colors changing from letter to letter within words.
How do I identify what any given color is?
When I click on a letter, it shows me a visual block of the color, but doesn't tell me what the corresponding color number is.
Problem being, if I see one letter and want to take its color to use it elsewhere, I have no way of knowing what that color is.
View 1 Replies
View Related
Jan 7, 2014
I have over 100 blocks that I need to add the exact same objects and visibility state to. Is there a way to globally make this change, or even to copy the visibility states from one block to the next without having to recreate the states in each block? I thought I had previously run across a routine on here that would make changes to multiple blocks at once, but I can't seem to find it now.
View 1 Replies
View Related
May 18, 2012
The AttSync command does what it advertises fairly well. My problem is that I have thousands of small blocks in a single drawing. (My current drawing has 2100 block references with four attributes in each one.) I may change the attribute values in a few of them and need to re-sync the attribute locations. When I run AttSync it updates every single block insertion. One of two things are desired:
1)Flag each block insertion as having been sync'ed, reducing the number of objects requiring synchronization when AttSync is called again. Provide a way to force all to be sync'ed.
2)Allow a selection set in the AttSync command after selecting the block to sync.
Either or both of these would a great time-saver for those of us with large numbers of blocks with attributes.
View 1 Replies
View Related
Feb 19, 2013
I received a file that has a large number of blocks with unnamed blocks inside. I need them all to be by layer, and i really don't want to explode it.
How can I can do it?
View 6 Replies
View Related
Nov 28, 2012
I have a couple of blocks I've drawn in the wrong layer. I manage to get them over into the layer I want, but the color remains the same as the layer I drew them in. Do you have to go in an change it to a set color instead of "color by layer", or is there another way?
View 7 Replies
View Related
Mar 21, 2013
How can i change the front (lines facing to the streets) line color from parcel? My parcels lines must have two colors.
I send in attach an example.
View 2 Replies
View Related
Dec 11, 2012
I'm almost done with my elevations! One last thing, though.... When I print it, it comes out all green. Is there anyway for me to change the colors so it's just black and white? Also, when I print it, there's a line between my 1st floor roof, my floor joist, and the floor for my 2nd story. Is there any way I can get rid of that, such as joining the walls? I'm using AutoCAD Architecture 2013.
View 3 Replies
View Related
Sep 17, 2012
I'm new to AutoCAD 3D and Rendering. In a model I'm currently working on, the colors I have in the 3D model become different colors when I create a rendering. For instance, in the model I'm working on, in the model, the object is blue, when I render it, it's grey. Is there a setting I need to change?
View 2 Replies
View Related
May 2, 2013
A user is having problems when using the copy command in AutoCAD 2013.
When they select objects, its not reporting on the commandline how many objects its found or keeping a running total of objects selected. Not even any duplications...
I've tested it on my machine but i cannot replicate the issue and have never come across this before!
Is it a bug? Is it a variable? User setting etc.
View 9 Replies
View Related
Apr 3, 2013
I want to make a map with 16 different plots (A1 to D4) in AutoCAD. Every plot in this map is connected to an excel file, where is some information listed (area, height, year, type) per plot. This map need to be dynamic, so by chosing what to see (for instance: area), the color of the parcels needs to change according to the value per plot (for instance: 12 m2 = yellow, 24 m2 = orange, 48 m2 = red). The two files I am using are send with it.
how to program this in VBA in AutoCAD. The shape of the plots I want to draw on my own (hatching each plot is also no problem), and somehow I need to name each plot (hatch). But how can I name the plots (hatches) and change the colour per plot (hatch) in VBA? The files I am using have 1600 different plots.
View 8 Replies
View Related
Mar 11, 2013
The normal color scheme for xref'd entites is the color gray. Is there a way to change them so that the linework can be more distinguishable? With everything being gray, it is hard to differentiate between contour lines and feature lines.
View 5 Replies
View Related
Oct 1, 2012
I'm working with Autodesk Inventor 2009. I have several parts colored in gray, black and red.
The grey color is the basic part color/material.The black color is feature color styles.The red color is face color styles. I need to change all the face color styles (red) to the original part color/material (gray/default). I can do this by right-clicking on a surface > properties > face properties.
My problem is that I have a lot of surfaces (mostly due to fillets). I can choose multiple ones with ctrl + click, but even that would take forever.
Is there an easier way to change all the face colors at once?
View 2 Replies
View Related
Jun 10, 2011
I have noticed when changing colors in the layer manager it does not take the first time and sometimes the second either. It does not seem to matter if creating a new layer or simply modifying existing.
View 9 Replies
View Related
Feb 20, 2012
I want to change the color of everything in my drawing except for 3 layers. There are hundreds of layers and blocks in this drawing, even after purging. I want to avoid just exploding everything and putting it on one layer.
I want to change everything to grey except for the 3 layers I'm working in. I'm using ACAD LT so I can't create a script to do the job. The only thing I can think of is going into the layer properties window and selecting each layer and changing the color one at a time.
View 9 Replies
View Related
Jul 14, 2012
We recently updated all of our software at my company from 2010 architectural desktop to 2013 autocad. We do a lot of architectural work where we use the "wall" functions to draw our floorplans. I have noticed that the walls are disappearing on some files and not on others. Or we will only be able to see the outside line of the wall, but not the interior, which results in an undesirable appearance to the floorplans.
I have also run across these error messages when opening the files, I dont know if they are related or not:
"Unhandled exception C0000005 (access violation reading 0xffffffff) at address E43AA180h"
and
"Unhandled exception C0000005 (access violation reading 0xffffffff) at address D41218AEh"
View 4 Replies
View Related
Aug 4, 2011
I've been given about 14 DWGs from another company all on different discs. Each DWG is a page to a set of Shop Drawings. All objects are in model space. I want to combine all of them into one drawing but every drawing has similar block names with different objects associated with the block and when I copy the objects from one drawing to antoher, the blocks morph into the exisiting block, if that makes sense. Just a poor initial set up.
Anyway, the solution to this, I have found, is to rename the blocks in each drawing to have room numbers on the ends, giving them unique names and avoiding the "morph" upon inserting. I have about 15 blocks per drawings to add -XX with XX being 01-14. Is there an easy way to modify them or do I need to do the RENAME command as many times as needed in each drawing?
View 4 Replies
View Related
Feb 15, 2013
Trying to change the color of a layer in a viewport (different than the default layer color (i.e. model layer color)). Objects are set to bylayer. Changing the VP color in the layer dialog brings up the color dialog, select a different color, click OK and the VP Color DOESN"T change in the layer dialog. It stays at its previous color. Occurs on several machines.
View 9 Replies
View Related
Dec 21, 2011
We've just upgraded to AutoCAD Architecture 2012 and I discovered that my match properties command (MA) is now on steroids. In the process of making an existing plan into a demo plan, I put a toilet on a demo layer. I intended to use match properties to put other select items on the same demo layer, but when I touched the lavatory, it turned into a toilet. I've never had this happen before. In trying to solve the issue, I've discovered the same thing happens with other AEC objects (couches, urnials, chairs -- all became toilets) and it happens in multiple files. Only walls and doors remain intact with only the layer, color and linetype changing (which is what I was expecting).
I looked at the settings inside the match properties command and none of them seemed to apply. I deselected the special properties options anyway, but the problem remains.
View 4 Replies
View Related
May 12, 2011
I have a schedule on a drawing and they used blocks for all the text. I want to change all the letters to uppercase.
View 4 Replies
View Related
Oct 18, 2011
we have recently changed our standard text style from ISOCP to ARIAL NARROW. I have a drawing with text in the blocks that is still ISOCP, i would like to know how to change all the block attributes text style in one go.
View 4 Replies
View Related
Dec 5, 2011
If you change a view port scale of a view port that contains a bunch of annotative blocks.
How do you change the active annotative scale of all those blocks without individually picking the blocks.
So all the blocks appear the proper size in the viewport.
View 1 Replies
View Related
Sep 10, 2013
I have a interesting problem with Dynamic blocks that have been created in AutoCAD 2007. The issue that I have is with the anchor point that is set by AutoCAD when creating the block, and whether or not I can assign a different anchor point.
The block that has been created is a dynamic block to designate parcels, and contains the APN (Assessor's Parcel Number, which is hidden), Acreage, a circle, and a digit that displays within the circle. When the block is imported to a drawing, the anchor point itself is NW of the block itself (the distance varies by the scale being used), and I would like to have the anchor point at the south quadrant grip of the circle.
The anchor point poses no problems when being used in AutoCAD, but when the blocks are imported to GIS, the anchor point causes the blocks to snap to the anchor point, rather than where they are placed physically within the AutoCAD drawing. This is a fairly simple fix in GIS, which simply entails moving the highlighted points in to the proper position, but it is a step that I would like to eliminate.
I have attached a block for reference.
View 2 Replies
View Related
Mar 22, 2013
I have a dynamic block symbol. It is a circle with two separate attribute elements at its side, with a line horizontally between them. No, this line is not a text underline; it is a separate line element that in one visibility state of the block must disappear.
My best results for blocks come when the element color of a block's geometry is set to "ByBlock" (attributes I leave as "ByLayer" color), and all of my elements, no matter what, I place on Layer 0. But in the case of this line, it always ends up matching the symbology of the block geometry. This I do not like.
When I insert a block, I use Attribute Editor to change the attributes' layer to the project's appropriate text layer. That way, in case I have to freeze a text layer, the attributes disappear also. What I want is for that line to be able to do the same.
Can an element's layer somehow be dynamically changed to automatically match the layer of another element, without having to Block Editor the block every time this is used from project to project?
View 2 Replies
View Related
Mar 28, 2012
Is there a way to change text font style (Text, and Mtext) in nested blocks automatically? I need to do this for multiple nested blocks at once.
View 7 Replies
View Related
Oct 5, 2012
How to edit the string below so that it will ignore all layer names starting with "E-". I want to change all XREF layers in the current dwg. to 161 but ignore all XREFED layer names that start with E- such as E-lighting, E-power etc.
View 4 Replies
View Related
