I am now having issues any time I try to insert a Block into any drawing - I get a Fatal Error.
I have uninstalled & reinstalled this afternoon but I am still having the same issue.
It happens when I am trying to insert blocks from both the Design Centre & also from Tool palettes.
Other users in my office do not have this problem, the only difference between my set-up & theirs is that I have installed the 'AEC Section Display & Tag Scale Hotfix' but I have tried uninstalling this but had the same results.
Inserting blocks from Design Center into model space causes the fatal error: access violation message to pop up.
This never happened in 2012, and I used it from day one.
My livelihood as a 2D drafting student depends on being able to use the blocks from DesignCenter, and now all of a sudden (I've been using 2013 since the day it released with no problems at all until about a week ago) it crashes every time I try to insert a block, regardless of which method I choose to insert with (i.e. right click insert or dragging into the model space window).
I'm on an Alienware M17x R3 running Windows 7 Home Premium with a Quad-core intel i7 processor, 16 GB of RAM, and an NVIDIA GTX 560M 1.5GB graphics chip.
I've tried system restore, program repair, clean uninstalls, and none of it fixes the problem. It seems that once the levee broke, so to speak, the bug is there to stay. Or perhaps more accurately, it was there the entire time and it was only a matter of time before it surfaced.
In either case, I would love, after having been a guinea pig, to see a patch issued for this if possible. Not being able to use the sample dynamic blocks is hell. Barring a patch sometime soon, I'm strongly leaning towards going back to 2012, which worked like a charm.
My company uses a menu system to organize standard symbols. The problem is that every time I insert one of these symbols I have to reset my Osnap settings because it clears all the check boxes.
When I type in the command "SC" for scaling the object, it'll asks me to specify base point then I can enter what scale I want it to be, such as 2 times or 0.5 for half sacle.
with the new 2013 version, sometimes it'll exit the command if I select the insertion point of the block or if the object is at the 0,0,0 location of the drawing. it'll also give a message of "the scaling factor is too small". But I haven't enter what scale I want to scale the object yet.
I am going through an architectural background, converted over from Revit. I have to go through and routinely burst the object, then qselect, choose what is not equal to bylayer, and change to bylayer.
I don't want to burst everything, making a monster out of the file, but going into every individual block to change the colors within the block to bylayer is also extremely time consuming.
Is there an easier way? maybe a wishlist item for ACAD 2014 to include objects within blocks, when using QSE?
New to using VBA with AutCAD. On my drawing I have to plot some line which I am able to plot using VBA. But when it comes to delete those lines, I have to do it manually. So gave a try to BLOCKS.
When I run the macro, I get following error -Run-time error - 2145320929(802100f)
I am trying to insert some blocks that i read from CSV file. I am reading the values for X and Y position from a CSV file and inseting blocks with this values in AutoCAD.
I just created a dynamic block for our rev clouds, cause they're annoying to draw.
For some reason when I insert it, it is automatically inserting at 0,0. Why is it doing that? Also, if I put it into a Tool Palette (my boss just discovered these, so I'm creating a whole bunch for the company... those things are AWESOME) and when I use the Tool Palette, it works just fine.
Now, this won't be a problem as long as everyone uses the TP's I'm creating, but we have one Engineer in particular that's a toolbag and doesn't seem to remember to use all the stuff I spend all this time researching and programming.
I have over 100 blocks that I need to add the exact same objects and visibility state to. Is there a way to globally make this change, or even to copy the visibility states from one block to the next without having to recreate the states in each block? I thought I had previously run across a routine on here that would make changes to multiple blocks at once, but I can't seem to find it now.
The AttSync command does what it advertises fairly well. My problem is that I have thousands of small blocks in a single drawing. (My current drawing has 2100 block references with four attributes in each one.) I may change the attribute values in a few of them and need to re-sync the attribute locations. When I run AttSync it updates every single block insertion. One of two things are desired:
1)Flag each block insertion as having been sync'ed, reducing the number of objects requiring synchronization when AttSync is called again. Provide a way to force all to be sync'ed.
2)Allow a selection set in the AttSync command after selecting the block to sync.
Either or both of these would a great time-saver for those of us with large numbers of blocks with attributes.
I use the following code to create blocks in AutoCAD 2013. When the user goes to insert this block, the insert command does not show a preview of the block when moving the mouse to locate it, and it comes in exploded. This was working at one point, but something changed. Is there some setting in AutoCAD or through the API that would cause this behavior?
Document doc = Application.DocumentManager.MdiActiveDocument; Database db = doc.Database; Point3d p1 = new Point3d(0, 0, 0); Point3d p2 = new Point3d(10, 0, 0); Point3d p3 = new Point3d(10, 10, 0); using (Transaction Tx = db.TransactionManager.StartTransaction()) [code]....
when I use GoExcel.CellValue (or other similar Excel link) snippet in iLoggic to write on a Excel sheet, I get a save prompt for the respective Excel file.
Is there a way to insert CAD blocks into the Multiline text editor, much like you are able to insert a block into a Table.
I am asking for the sole purpose of Plan Notes. When we lay out Plan Notes originally we place the note bubble next to the line of text it represents. When we have to come back at a later time and edit the mtext, sometimes add a line our users are in a rush and forget to re-align the note bubbles with the text. If there was a way to insert the block into the text editor and have it still be able to edit it.
Is this a feature in 2013?
AutoCAD MEP 2013 Window 7 pro 64 bit E5440 (8 CPU) ~2.8ghZ 16GB RAM NVIDIA QUADRO FX 3500 2270MB
I need to insert the same block from a tool palette multiple times into my drawing. Is there a way to do this without having to pick the block from the tool palette every time I want to insert it?
When inserting certain blocks that were created in the 0 layer, they are not taking on the color of the layer in which I insert them.
Now when I click on the object, it shows up as being on the correct layer but the object is still white, I ran into something like this before, and was able to fix it by going into the Block Editor and setting the layer in there. This only happens on certain blocks.
I believe in our previous AutoCAD 2009 software we could create a block with attributes and save the drawing as a block, either wblock or create block. When inserting this block into another drawing we would get the attribute dialog box appear and complete the required information. Within AutoCAD 2012 we have made a block with attributes, when we insert this drawing into another drawing the block is inserted but no attribute dialog box. If I click on the block I see edit block definition dialog box with the drawing file name of the block and the block name. If I explode the block I then have my block and when clicking the block the attribute dialog box appears. It seems that in AutoCAD 2012 when we create the block and save the drawing and then insert the drawing it becomes a nested block type. Is there a setting I need to switch to prevent this and have the block insert and then click on it to change the attributes as required?
I am trying to insert blocks but in the command line it says invalid, if I copy & paste the block in it works fine but as soon as i try to use the insert command it will not work.
Probably useful to tell you that I have around 60 blocks each saved as a DWG file and all of them are saved in 1 folder so there is no other crap in there.
the thing that really baffles me though is the fact that after I have pasted the block in to the drawing, the insert command works for that block.
I downloaded a block of a plan view of a wheelchair user so I can see just how much space there is available.
The block is dimensioned but when I insert it and measure its dimensions, the readings are different. For example, a dimension reads 1070mm but when I measure it, I get 1023mm. Not far out but when I measure a 150mm dimension, I get 83mm. A 460mm dimension is measured as 536mm.
At the moment when I use our company tool palette and select a block when I insert it if I hit the CTRL key on my keyboard the insertion point jumps between all the points in my block be it stretch points, base points or basic points.
If I create my own palette and add my blocks to it, the CTRL function doesn't work when I select a block.
Can I make VBA macro (application) for inserting blocks? I need to insert blocks from list of blocks that I made. I want to use less time with that application on inserting blocks, then to use standard method Insert>Block... So I want to check the block from my list, to define attributes and to put the block automatically on drawing, and then to repeat all with another and another blocks. all to be put one close to other.
I have Created a Block which has got some 12 attributes , when i invoke insert command and insert the Block , It was displaying only first 8 attributes , then when i click next the remaining four attributes were displayed under the previous inputs which i have given .
that is for eg : If i have attributes named a,b,c,d,e,f,g,h,i,j,k,l .
In the first dialog box it asks
a =
b =
c =
d =
e =
f =
g =
h =
then i click next
e =
f =
g =
h =
i =
j =
k =
l =
so inputs for e,f,g,h and all given already but it was displayed
again so i need to press tab key for 4 times and come to input "i = " and so on
I don want this to happen. i want it either all 12 prompted in single dialog box or
atleast no repetition of prompts.(8first&4alone in next)
And i already knew about the System Variable attdia & i dont want to give input via command prompt
I have a drawing with some annotative blocks. ie Block name "BAR'.
If I insert another drawing (mostly old v2000 files) as a block which also contains blocks named "BAR" (which of course are non-annotative) the Blocks do not show up.
Is there any way to get arround this? Idealy I would like the old file inserted and have the annotion scale of the blocks in the inserted dbg set to the current scale.