AutoCAD 2013 :: Batch Conversion Of All Or Selected Blocks To Mass Objects?
Sep 30, 2013
I need to export many library elements (conveyors) which are saved in individual blocks to mass objects. I need to convert them to IGES after that.
Until now I have to open every single block and convert all of it to a mass element. This simply takes too long.
Is it possible to write a small script or program which converts all blocks or the selected blocks to mass elements?
- 2500K @ 4.2Ghz- 8GB - Radeon7970 -
- Xeon 1230V2 @ stock Ghz- 32GB - Quadro 2000 -
View 7 Replies
ADVERTISEMENT
Jul 29, 2013
I need to convert a large number of drawings from Imperial to Metric (I have copied that drawings and intend to save as a metric set, so I'll be overwriting (and possible appending "-METRIC" to the file name.) So I wrote a batch file to collect the drawings then apply a conversion (autocad) script.
I also created a script to close the drawings that would run after a batch (i.e. subdirectory (say 20 drwgs)).
If I open the drawings manually and run the scripts, they work fine, however I have been unable to automate the procedure.
Batch to collect files:
SET ACAD2013PATH="C:Program FilesAutodeskAutoCAD 2013"
FOR /R c:ACADCrosby-Converted_to_Metric est %%f in (*.dwg) do start /wait %ACAD2013PATH%acad.exe%%f /b c:ACADscale-imperial-to-metric.scr
start /wait %ACAD2013PATH%acad.exe c:ACADCloseACAD.scr
[code]...
View 5 Replies
View Related
Oct 9, 2013
I started to convert ACAD blocks to mass elements in order to convert them to IGES.
I need to import AutoCAD 3D objects to Factory Design Suite. The conversion takes
quite some time on my 1230V2 Xeon and I wondered if I could reduce the precision of
the conversion in order to speed things up?
All the Options like facetdev don´t apply to the conversion but to the view in ACAD only.
View 4 Replies
View Related
Aug 4, 2012
I'm trying to convert a few thousand files from dwg to pdf and I believe I'm on the right track but am a little stuck. I'm attempting to use DWG TrueView though I have limited access to AutoCAD for like template creation and such.
I seem to have trouble getting some of them to plot/publish and also it seems many of the layouts don't show the entire actual view (like I see 1/4 corner taking up the entire page) - scaling problems.
My procedure is to create model and sheet page setup files in AutoCAD to use the built in DWG to PDF printer and 8.5" x 11" landscape. So I open the acad.dwt template file, and save one for model and one for layout after setting the above settings.
I then open one of the drawings and run batch plot, then I set the list with all the layout only drawings (was going to do models later) and import the page setup file for drawings. I am getting an error saying the layout is not initialized -I was going to consider using AutoCAD and MultiBatch to initialize the layouts. If I attempt to plot now I currently do not see any PDFs created even though the logs say about 6 or so completed.
View 2 Replies
View Related
Oct 8, 2013
I have 200+ page drawings and need to open each dwg to erase same block and text strings. Any way to batch erase same blocks and strings in multi-pages?
View 7 Replies
View Related
Aug 6, 2012
I'm having a minor issue with Autocad 2013 at the moment. I use the Quick Properties box to change a lot of my object properties, but since changing from 2012 to 2013, I have noticed QP doesn't recognise the selection of any objects.
View 9 Replies
View Related
Apr 9, 2013
“More than 10000 hatch boundary objects are selected”,
In the attached screenshot, I wanted to make hatch for the indicated boundary but I got the message shown in the second screenshot (“More than 10000 hatch boundary objects are selected”)
The dwg file is stored in the link below:
[URL]
What is wrong with having any number of hatch boundary objects?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 8 Replies
View Related
Jun 13, 2012
When I type in the command "SC" for scaling the object, it'll asks me to specify base point then I can enter what scale I want it to be, such as 2 times or 0.5 for half sacle.
with the new 2013 version, sometimes it'll exit the command if I select the insertion point of the block or if the object is at the 0,0,0 location of the drawing. it'll also give a message of "the scaling factor is too small". But I haven't enter what scale I want to scale the object yet.
View 1 Replies
View Related
Jun 26, 2013
I am going through an architectural background, converted over from Revit. I have to go through and routinely burst the object, then qselect, choose what is not equal to bylayer, and change to bylayer.
I don't want to burst everything, making a monster out of the file, but going into every individual block to change the colors within the block to bylayer is also extremely time consuming.
Is there an easier way? maybe a wishlist item for ACAD 2014 to include objects within blocks, when using QSE?
View 6 Replies
View Related
Dec 3, 2012
Everytime we insert a block from our library, a message pops stating:
"This application has detected a mixed version of AEC objects participating in this operation.
Newer AEC objects will be disallowd from participating in this operation."
I already converted all blocks to AutoCAD with Exploded AEC Objects, but the message persists.
View 2 Replies
View Related
Feb 28, 2011
(defun CELBLKS ( / e blk ss blkl)
(setq blkl "" ss (ssadd))
(while (setq e (entsel "
[Code]....
i have this lsp, it works great but how can modify it if i want select with a window.? exemple: if i have 3 differentes blocks, i want to select them with windows and the lisp select all blocks that are identical of those 3.?
View 9 Replies
View Related
Mar 21, 2013
It's possible to do bach IDW to DWG conversion, but autodesk doesn't provide a tool to do the opposite:
Inventor's DWG to IDW
View 1 Replies
View Related
Nov 1, 2012
I have about 500+ idws that has to be converted to dwg. No problem I thought... just use the task scheduler and create a task (Convert IDW to DWG) to do it.
That works.... but there is a small problem. The DWG that it saves has the data in paper space. Of coarse, the customer requires it to be in Model Space.
Is there a way to do this with the Task Scheduler? or some other way, short of manually opening/saving each idw. I don't own KwikBatch Runx64 and was hoping we could do this without purchasing something else.
View 3 Replies
View Related
May 19, 2009
I've got about 200 photos that need to be re-cropped from 720x486 to something smaller. Is there a way to do this to the entire lot with a single command?
View 4 Replies
View Related
Oct 7, 2013
I´m trying to write a script to convert all the blocks in a drawing to mass elements and export them to IGES thereafter.
I would like to select everything first. Then launch refedit and select all the blocks.
After that I would like to convert them to mass elements. When saving to IGES I would need to select everything again.
I pieced the following script together, but it fails. I think it is bexause of the request to select objects manually. Could I add a delay which would enable me to select an object?
Also it looks like ACADA is not accepting the "all" command when pselect is called by a script.
---
PICKFIRST 1
select
All
efedit
OK
A
N
_AecMassElementConvert
ALL
_REFCLOSE
_SAV
_EXPORT
all
---
- 2500K @ 4.2Ghz- 8GB - Radeon7970 -
- Xeon 1230V2 @ stock Ghz- 32GB - Quadro 2000 -
View 1 Replies
View Related
Sep 30, 2003
I'm using Photoshop 7.01. I have a bunch of 16-bit TIFFs that I want to batch convert to 8-bit JPEG FINE.
I created a manual action, which works fine, hook it up to F2 and open up 50 tiffs at the same time. Start hitting F2 and the files disappear and I end up with a nice bunch of jpegs.
Now I want to automate it, so I create a new action.
Open TIFF
Change to 8-bit
Save as jpeg
Close
When I run a batch, choose a source folder and target folder, and kick it off, I see all the files open and close, but only the first one (used in my example to create the action) ends up as a jpeg, followed by a bunch of TIFFs.
As far as I can tell, the action opens all the files one after the other, but it always saves the same file.
So, in my output folder, I get 1 JPEG followed by 250 different TIFFs, but the JPEG always appears on my screen for a split second during the save sequence, so it looks like it is being saved 250 times...
View 4 Replies
View Related
Jan 25, 2013
I need to convert from bitmap images to PNGs with the command line. I've tried looking into script-fu, but lisp is one of those languages I could never figure out.
I've tried using imagemagick, but it did not properly convert the images. The images are apparently 32bit Windows Bitmap V3 files with an alpha channel; according to a page I found on google, imagemagick will not preserve the alpha channel in this particular case. I don't know for certain if that's the actual reason why imagemagick isn't working, but it definitely isn't working. It does, however, work if done manually in gimp.
This is going to be part of a python script, so I need it to convert a specific bitmap file rather than all the ones in a directory.
View 6 Replies
View Related
Jan 7, 2014
I have over 100 blocks that I need to add the exact same objects and visibility state to. Is there a way to globally make this change, or even to copy the visibility states from one block to the next without having to recreate the states in each block? I thought I had previously run across a routine on here that would make changes to multiple blocks at once, but I can't seem to find it now.
View 1 Replies
View Related
May 18, 2012
The AttSync command does what it advertises fairly well. My problem is that I have thousands of small blocks in a single drawing. (My current drawing has 2100 block references with four attributes in each one.) I may change the attribute values in a few of them and need to re-sync the attribute locations. When I run AttSync it updates every single block insertion. One of two things are desired:
1)Flag each block insertion as having been sync'ed, reducing the number of objects requiring synchronization when AttSync is called again. Provide a way to force all to be sync'ed.
2)Allow a selection set in the AttSync command after selecting the block to sync.
Either or both of these would a great time-saver for those of us with large numbers of blocks with attributes.
View 1 Replies
View Related
Dec 6, 2013
Seems like Inventor ignores wires and cables when calculating mass of the whole assy.
View 1 Replies
View Related
Sep 26, 2013
Up until a month or so ago, using photoshop CS5 - windows, a batch psd conversion of nummerous files say fred1. psd through fred10.psd gave me fred1 jpeg through fred10.jpeg. I saveconversions to a dump jpeg folder on another drive where there are also, dump psd and dump tiff with tiff not being much used.
Using actions, the first conversion of a series will be fred.jpeg but thereafter it will be fred1 copy.jpeg through fred10 copy .jpeg. No big deal for a few files as the word copy can be deleted. However, if a jpeg file say fred.jpeg needs to be updated in say a slide show or web site then the new conversion of the updated file as fred copy.jpeg causes identity problems.
how can I return to the situation where fred.psd becomes fred.jpeg and not fred copy.jpeg. This does not seem to happen for individual conversions the manual way. I tried to convert to jpeg 2000 but the same happened. I'm not sure about jpeg 2000 and how it would work if taking to a phot processor for "photographic" prints.
View 6 Replies
View Related
Oct 16, 2011
Whenever I open the batch conversion window a file always appears in the main file list window; I have to manually remove it (pressing clear) before using the browse button.
View 3 Replies
View Related
Jun 19, 2009
I have an older version of Photoshop, (7.0), but I'm sure the Batch Conversion Process is similar with all versions.I have a folder of photos, (large file sizes), I'd like to reduce each file size to a little bigger than a Thumnail size. This is hopefully something I can do bysetting the same parameters to all the photos.Here's what I've figured out (so far)FileAutomateBatchChoose Source FolderChoose Destination FolderThat's about it - when I choose both folders, I can't seem to pull up the parameters to reduce the file sizes.
View 7 Replies
View Related
Jan 19, 2006
I have a folder full of images and I'd like them all to be in the 8x6 ratio, with white as the background if any canvas size needs to be changed. I can do a batch and make every picture a canvas size of 800x600, but if the original is 1100x240 that doesn't help me much, I'll loose alot of the image's width.
So I just want to convert the image's canvas size to be in the ratio of 8x6. Is this possible with Photoshop CS or Photoshop CS2?
View 2 Replies
View Related
Mar 11, 2004
i am running photoshop 6.0.1 on win2000.
I need to know how to batch convert many tif images from 200 dpi to 300 dpi.
do i need to modify a .atn file? is there a plug-in or something?
View 2 Replies
View Related
Apr 2, 2012
I use PS CS5 and LR4 on my Mac. I also have the prior versions of both on the Mac, too. I run the SL OS.
Here's my question: I have about 500 images in .PCD and I want to batch convert them to .TIFF format. Is there a plug-in I can use or should I go to a third party app?
View 1 Replies
View Related
Aug 4, 2004
Is it possible to resize a batch of jpegs and also to do a batch conversion of jpegs to gifs,to save time?
View 4 Replies
View Related
Oct 24, 2012
I've tried to convert several files using "Process multiple files" in Photoshop Elements 10. Input files are CMYK psd files with one layer and transparent background. They should be resized and converted to PNG. It works excepting the transparency in the PNG files is missing - the background is white instead. The conversion works however if I open a single file, convert it to RGB after prompt and save it as PNG. The background is transparent as it should.
So why my pngs are not transparent when using batch conversion?
View 12 Replies
View Related
Feb 27, 2014
I want to batch convert some .psd images into jpegs in pse 10 or 11. I know you can batch convert for image resizing,but don"t see the ability to convert images from one format into another.
View 3 Replies
View Related
Aug 24, 2011
In 2006 I started a vector-based comic using CorelDraw, made for posting on the web in RGB. Over the years I've made the transition to a more CMYK-friendly palette that works on the web, though a handful of heritage characters still have the old RGB profiles. I'm looking to do a book collection now and, as such, want to convert these characters' specific colors to their fitting CMYK counterparts.
Is there a batch process that allows me to convert a specific handful (maybe 2 dozen) colors RGB --> CMYK across a number of files? I'm looking at hundreds of pages of artwork here, so even Corel's Object Find/Replace would be a tedious slough.
View 9 Replies
View Related
Jul 26, 2013
I have a set of around 100 images which I need to edit for hue and saturation. All are similar. Can I batch convert these with PSP X3?
View 2 Replies
View Related
