My company uses a menu system to organize standard symbols. The problem is that every time I insert one of these symbols I have to reset my Osnap settings because it clears all the check boxes.
View 3 Replies
Modifying objects with constrains deletes the contains,
In the screenshot below, the two lines have the “equal” constrains. One of them is extended and thus both lost the “equal" constrains!
How objects can preserve constrains while being modified?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
How to turn off osnap for objects under wipeouts?
It is annoying that although the objects under wipeout are not shown, they still become targets of osnap!
Everytime we insert a block from our library, a message pops stating:
"This application has detected a mixed version of AEC objects participating in this operation.
Newer AEC objects will be disallowd from participating in this operation."
I already converted all blocks to AutoCAD with Exploded AEC Objects, but the message persists.
We're using C3D 2013 SP2. The survey company we use uses point styles to show the blocks. Say they shoot a catchbasin. Instead of inserting the block, the point shows up as the block.
I did a field check & needed to insert a missed CB. When I inserted the block, the other points that were CBs disappeared. I had to insert the block, copy it the clipboard, undo the insertion & then paste the block in. It did this on other drawings & other blocks.
All of my OSNAP settings are reverting back to some default every time I open AutoCAD. This includes the snaps that are auto (I set endpoint, intersection and perpendicular. When I reopen, I get a random medly of snaps like tanget, parallell, insertion ect.) Object Snap tracking also truns off.
The settings in my profile also turn off (eg. marker). I have tried saving the settings to my profile with no luck. All of my other profile setting remain untouched.
I'm on Civil 3D 2012
From time to time photoshop (cs4 and cs6) deletes our Wacom settings and we have to put every short key completely new in the wacom settings. how did this happen? how can we avoid that? or at least can we save the wacom settings somehow?
View 5 Replies View RelatedI have a routine that sets user defined osnaps based on a text file.Here is what is an example of user stored osnap settings -
(setq User_Osnaps (list (list "Alan" "endp,midp,int") (list "John" "cen,ins")))
Here is routine I use to set user osnaps -
(defun CU ()
(vl-cmdf "-OSNAP" (cdr (assoc (getvar "LOGINNAME") User_Osnaps)))
(princ)
)
This works great so long as the user is not in the middle of another lisp routine.How can I change this to a transparent command that will work to set osnaps while running another lisp routine?I would like to store it in a toolbar button.
We model the building using AEC steel members in AutoCAD ACA. When the piping group xrefs our model into their model (in regular AutoCAD) to add their pipe, the AEC steel behaves properly in model space, but when they go to dimension in paperspace (for example from the center of their pipe to the face of a column) osnap does not recognize the AEC steel geometry.
View 3 Replies View RelatedAutocad 2007.
Can we treat the exploded text (i.e. individual text alphabets) as geometrical objects?
Can we apply "OSNAP" options on these exploded text objects?
Actually, I would like to prepare the symbol of National Board NB to be used to make the "Name Plate" for pressure vessel.
While drawing with a number of oSnaps activated, at irregular intervals they all inexplicably turn off and are replaced with the Near oSnap only.
how I might be inadvertently doing this or why it might be happening on its own?
When trying to draw or stretch a line or grip along an object in 2013 it does not follow the osnap like it does in 2012. For instance if I draw a line and then want to draw another line from the beginning of that line along that line using the nearest osnap and inputting a distance, the line follows the cursor rather than the snap.
Civil 3D 2013 SP1
Win 7 x64 SP1
Intel Core2 Duo 2.67 GHz
8 GB RAM
NVIDIA Quadro FX 3500
I thought there was a setting for this? I want to adjust the Osnaps so they appear further away from the point. IE: As I want to pick the quadrant I have to get so close to the quadrant before the osnap shows. I can't remember the variable to adjust this distance.
View 3 Replies View RelatedI've noticed some issues with Osnap tracking not working consistently with a floating command line. It seems to happen especially when trying to track back along an object.
No problems whatsoever when command line is docked.
Just found the issue with my AC2013.
A bit of difference is that the polylines do not have to be even closed. Any polyline gives me exactly the described behaviour, which is definitely not intended. Appears still not resolved.
While in model space anything I insert, copy/paste or bring into model space looks squashed compared to the original data. It's like the Z axis is rotated. As it sits all the original data in model space looks fine or "flat" as it should.
When measuring the inserted squashed object it's giving me the correct dims but because it's squashed 18" looks like 12", if that makes any sense. Also if I copy/paste the original data in model space into another new template it then looks squashed.
Is there a system variable or setting just for that dwg that could have been changed?
I am using AutoCAD 2012. When I use Paste Special to insert and object as an Image Entity AutoCAD shuts down. I used it for years on older versions of AutoCAD with no problems. It is good to use when inserting a PDF into a drawing to trace over the objects for CAD use.
View 4 Replies View RelatedWhen using the design pallette tool bar, my objects will not insert into the selected surface? Reasons Why?
View 2 Replies View RelatedI have been able to insert a PDF into an AutoCAD 2013 dwg but only as an attachment. This seems to be similar to xref but I can't seem to bind the pdf to the dwg. Therefore when I send the dwg to a client and they open it, they only see the drawing format and no PDF attachment. Sending the PDF as a separate file is not an acceptable solution.
Is there a way to insert a PDF and bind it to the dwg so an external reference file is not required?
I'm not interested in converting the PDF to a dxf or any other format. Just interested in knowing whether there is a way to insert and bind a PDF to an ACAD dwg.
I have 4 plans of the a building in separate files, all set to world ucs. I xref in ground floor to the first floor, then move the first floorr so it aligns. I complete the same process for plant room and roof. Having saved all the files I then xref back the first floor into the ground floor using the insertion point as 0,0,0 but the plans do not align???!!! I do the same for the other plans, the plant room plan aligns with ground floor whilst the roof plan aligns with fist floor [but not ground].
I have tried reinserting numerous times but am missing something? The files were supplied to us as dwg format but I do not know the full history.
I am having trouble getting a simple macro to browse insert a block. My file path looks like this.
L:/Acad Blocks/Blocks_(SEPCO)/STRUCTURAL/2013_SEPCo_Blocks/WELD_FILLET.dwg
I'm working in a different department and can't figure out why the attribute box won't open when I insert their title block. I have checked that all the variables attmode, attdia, attreq, filedia, and cmddia are all set to 1 in both drawings. What am I missing? I'm using 2014. I'm attaching the drawing I want to insert.
View 4 Replies View RelatedIs there a way i can insert a title block through the design center by selecting the the layout and dragging it in. When i bring it in it gives me just the blank paper without the title block.
View 4 Replies View RelatedI've made some customisation in the ribbon of a 2013LT version.
Now some customisation functions are only available on the Full, so I download and install it but I can't find a way to import all those custom settings grom LT to Full...
Seems it works only from LT to LT or Full to Full..
Just upgraded a user to Autodesk Building Design Suite Premium 2013 but AutoCad 2013 and AutoCad MEP 2013 are not saving settings.
On first use the crosshair is large and angled, not standard. If I run "Rest values to default" then the settings are standard until I either restart AutoCAD or open a drawing then have the same strange cross hair.
Have tried creating a new profile, setting it as default startup profile by altering the shortcut but no matter what settings are not saved and revert to strange cross hair once AutoCAD is re-opened or a drawing is opening.If logon to computer as a user without a roaming profile all works fine.
Happens every year. Upgrade and spend half a day or more trying to get everything back to the way I had it. All I have is a couple small toolbars for commands that are several clicks deep in the ribbons and I want them "right there" all the time.
I thought Autodesk 360 might be a good tool for this. All it did was DOWNLOAD some old settings and destroy one of the toolbars I'd created. They really need an override in there to specify upload, download, overwrite or don't.
I'm trying to migrate (I guess that's the technical term) my settings from 2013 Mechanical to 2014 Mechanical. It's probably too late already, after 360 did its deal, but I really want to get this down so we don't go through it every year anymore.
I maintain that PTC had this part of it down Pro/ENGINEER. You had a config file that was editable plain text.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
A user is having problems when using the copy command in AutoCAD 2013.
When they select objects, its not reporting on the commandline how many objects its found or keeping a running total of objects selected. Not even any duplications...
I've tested it on my machine but i cannot replicate the issue and have never come across this before!
Is it a bug? Is it a variable? User setting etc.
What is the AutoCAD command within AutoCAD 2013 for inserting image files produced in .JPG format as company logos onto an A1 drawing border for use in AutoCAD.
View 2 Replies View RelatedI am inserting a block that has one attribute with tag "FAB_HEIGHT". I have not been successful in editing this attribute.
Public Sub InsertSection()
'Call the Function that returns strSectionBlk (the Head Section drawing)
getSectionDwg(strModel, strHeadType)
'Start the database
Dim db As Database
db = HostApplicationServices.WorkingDatabase()
[Code] .....
i have a series of points from a cross section taken using an adcp and i am trying to draw the cross section in autoCAD lt 2014. is there a way i can enter the points as a sort of script so i dont have to manually typoe in the distance and height between each point as i have about 200 points in each cross section.
View 6 Replies View Relatedtried to insert Excel tables into 2013 3D? It worked fine in 2012 but we just upgraded to 2013 and it no longer works. We get an error message that Excel is not supported. Is this a new feature or a bug? Also, our old drawings with the table already inserted does not plot normally. The table characters print at diffent sizes.
View 9 Replies View Related
