we have recently changed our standard text style from ISOCP to ARIAL NARROW. I have a drawing with text in the blocks that is still ISOCP, i would like to know how to change all the block attributes text style in one go.
View 4 Replieschanging text style in a drawing. Let's say there is a drawing where the font style is standard, or the standard is overwritten in the text box (different size or font). I want to create a new text style which uses a new text size and font.
If i select the text which was created earlier and switch text style to the one i just created only the size of the text changes not, and the font remains the same.
But if i enter the text formatting box select the text and in style i select the one i created (even though is already selected) the font will change as well. The problem with this solution is the time needed to change every text in a large drawing.
If i use MATCHPROP the same thing, the size of the text will change but not the font.
Is there a way to change both the size and font of the text fast and easy?
As Topic explains, just realized ( to my embarrasment ) that I have just done every text in an entire drawing with text style "standard" instead of our own "ETR".
There is no difference in font/height/width or anything, reason I need to change it is because we need to send our drawing to our client in .dwg format and he will then copy everything we've done on the drawing and import it into his own drawing. Problem is if he doesn't use the same font as standard style as we do our text might be dislocated in some places.
Problem is many of my texts are attributes within blocks and they need to change too. Any quick and smart way to change every text and attribute on the drawing, nested or not to another textstyle?
AutoCad LT 2014
I am looking for a way to change the text style used by a table style with Visual LISP. So far I have been able to get the IAcadTableStyle object from the acad_tablestyle dictionary, but there is no property for text style. Is this even possible? Code and results are below.
(defun DumpTableStyles ()
(setq dict (vla-get-dictionaries (vla-get-activedocument(vlax-get-acad-object))))
(setq TableStyles (vla-item dict "acad_tablestyle"))
(vlax-for TableStyle TableStyles
(vlax-dump-object TableStyle)
)
)
[Code]....
Is there a way to change text font style (Text, and Mtext) in nested blocks automatically? I need to do this for multiple nested blocks at once.
View 7 Replies View RelatedI have inside every text,Mtext contents different text style like Arial_1 , Arial_2.
How i can give all the contents inside one style ? the normal procedure i will enter inside text to enter editing mode and changing text format style one by one. I want it once.
I want to save my routing of entering every text to change its content text style.
(Notice:select all from outside without editing mode will not do the job)
This has happened in a couple of drawings now. The STYLE dialog keeps saying "The current style has been modified. Do you want to save your changes?" even when I have changed nothing at all. Anyway, I select the style I want, hit Apply and Set Current, and put in some text. Now I list that text, and sure enough, instead of being on L80 it says L-BASE|Standard or some such thing. If I use DTEXT, Style and set it there, my text will be the correct style - but if I go back to the Style dialog box, L-BASE|Standard will show as current again. Acad C3D 2011.
View 3 Replies View RelatedI need to change the style of my single text, not Mtext, but just text on AutoCAD 2011. If I try to edit Mtext then the Ribbon on the top of Cad changes to Text Editor and allows me to modify the text as I require. However when I click into single text all that happens is the text becomes highlight and I no longer get the option to change the style or font. What toolbar or option is missing so I can get it back as normal.
View 9 Replies View RelatedI am using Civil 3D 2012 and seem to have a reoccurring problem with the text styles changing. At the start of the day, I will open my drawing and find that my text style has changed and I am not sure what is causing this. I check my text styles and none of my settings has change nor has the text style. Nothing seems to fix the problem other than running a repair of the system.
View 4 Replies View RelatedI work in an office where many people open the same file..the drawing was done with all the dimensions and text set to swiss cn bt but now after the file was opened again by different users from different computers...the text now appears differently each time...to some it appears as Arial others something else..
how do i fix this...i don want to individually select each one and change it back to swiss cn bt...and wen i do select individually and change it..the height of the dimension gets very small and becomes non editable.
I have a problem with some of our drawing sheet attributes that we are updating from a CSV file. The attributes are originally in Arial Bold but when we run the update routine the font disappears, if we run the update routine a second time it reappears correctly updated but the font has changed from Arial Black to Standard.
I have rebuilt the titleblock and get the same result.
I cant get into the routine because its locked away in an FAS file and the manager is on holidays for a couple of weeks.
I have a schedule on a drawing and they used blocks for all the text. I want to change all the letters to uppercase.
View 4 Replies View RelatedI am trying to create a block which consists of my company logo and some text to use on my drawing sheets or templates
I have created a block by making a autocad drawing and creating /saving it as a block .. When I insert the block into my drawing the text style changes into a different style... why is this happening and what can be done to prevent this change from occuring. I am using autocad lt 2009 and 2005 the problem is consistant with both versions...
I am trying to produce a slideshow in LR3 of a series of travel shots. Problem is that I want to insert a nice caption to each individual shot showing the place, country etc etc.
It seems the only way to do this is to enter the caption initially in the Metadata in the Library module and then select " Captions " in the Custom text box in the Slideshow module.
My problem is that I hate the clunky big white text that shows on the slideshow. I cannot seem to find anywhere where I can change this to a nicer text font, style and colour. You can change the style text in the text overlay panel but that then applies to the whole slideshow. I need a nice individual caption for each shot.
I got this weird issue when placing my custom made titleblocks in AutoCAD. All the attributes of the block jump to standard text style when placing it in my drawing. Allthough this ain't allways happening. It seems to me like there's a setting for this but i can't find out how.
It can happen suddenly too. Like when i open a new drawing and then add my titleblock, it's like it should be most of the times. Allthough when i start to edit the block (scale/move/copy,etc) it can change like you can see in the drawing below.
Offcourse, as a company, you do not want to deliver your drawings with a titleblock like this.
I am working with a template, that doesn't allow me to change the dimension style. In the project the Use Style Library is set to Read/Write. I have created my dimension style, at this point just a copy of the ANSI standard with a text size difference. I went to my template and set that syle as my default, and saved it. Now the fact that it doesn't automatically update the drawing I had alreadycreated is a nuisance, however if I creat a new drawing, the style has reverted to a different standard, that is not even the ANSI default. If I right click a dimension and change the dimstyle to what I saved it does update, but if I try to change the style again it defaults to a random dimstyle, AND changes the style even if I hit cancel. So... the question is how to make the changes stick?
View 1 Replies View RelatedWhich settings or where do I go to set my drawing Style, Text height and line space factor on all my drawings in one shot. It is frustrating going through many drawings changing it.
View 9 Replies View RelatedI have a dynamic block that contains both geometry as well as text. I don't want the geometry to scale up based on the drawing scale but I do want the text to scle according to the drawing scale. I have tried making the text both annotative and non-annotative in the block and get the same result. I can get the text to scale properly if I make the entire block annotative but that also scales the geometry which is not accurate.
View 1 Replies View RelatedHow do you change the dimension text size in an .idw 2D drawing? The dimension text and arrowhead size is too small and I would like to make it sligthly larger.
View 3 Replies View RelatedHow to find no of times specific blocks used in a drawing?
View 9 Replies View RelatedHow do I manipulate a height parameter all of the dynamic blocks in the drawing from one single field? Say a field located in the drawing properties or on the drawing itself.
For example: Multiple blocks of different walls of same height with other blocks of things on located on those walls, dependant on the wall height, all linked to and changed by a single field. Possibly a Wall Height field located in the custom tab of the drawing properties.
I can pickout each of the blocks and change them at the same time in properites menu because they all share the same parameter name. I would just like to have that height parameter of every block in the drawing, that has that specific parameter controled by a single field. Which I could enter a new height at anytime that would change every block in the drawing to that height.
I have a project with many different blocks of text, and colors changing from letter to letter within words.
How do I identify what any given color is?
When I click on a letter, it shows me a visual block of the color, but doesn't tell me what the corresponding color number is.
Problem being, if I see one letter and want to take its color to use it elsewhere, I have no way of knowing what that color is.
Is there any way to lock a text style so that the associated font style can not be changed?
View 2 Replies View RelatedI am hoping to link text items between pages and items in the drawing such as elevations?
So, ideally, I would have a front page to my drawing set, and this would have a 'Contents' type table on it, with the title name of each drawing in one column, then the drawing number in the next column. This is the tricky bit, someone must know: If i was to change the name / number of any item in this table, could it change also (linked to) the following items:
Drawing title (as a text idem on the layout sheet that that drawing relates to)
Drawing number (as a text idem on the layout sheet that that drawing relates to)
Elevation call-out (on the plan view)
And possibly:
Excel reference cell
Drawing layout tab title (this might be pushing it!!)
Perhaps this could be done by linking to an external Excel spreadsheet with these titles modified in there? I'm not sure. This would be ideal as typing into excel is a lot easier than the triple click text modify method required currently.
I waste a lot of time renaming and updating sheet names / titles / numbers. Are there standard templates for drawing sets that may have this built in available anywhere that I could try?
I am wondering if it is possible to do a style update (or style update check) upon open of a drawing?
The example would be that I have stuff made from way back that the colors/dimension sytles ect dont match the current standard and upon opening a file where they are not current, it would either prompt to update immediatly OR update automatically with no prompting (preferred method).
I am doing a massive amount of updates from old files recently and to save myself 1 - 3 clicks per drawing would be wonderful.
I have approximately 800 library files that I would like to change the Dimension Style on. Is there a way or some program out there that would allow me to change the Dimension Style on all 800 drawings at once or do I need to open each one up change and save?
View 3 Replies View RelatedI have been working on a drawing with 3 different dynamic blocks for several weeks and everything has been working perfectly. However, all of a sudden this afternoon, the text in all 3 dynamic blocks disappeared and will not display on the screen in paper or model space, and does not print.
As best I recall, I was creating a polyline viewport when this text disappeared.
I cannot turn the text on in these dynamic blocks. The text in on layer 0 which is on, and is unlocked and unfrozen. Additionally I have turned on, unlocked and unfroze all layers in the dwg and this does not work. I have also checked the text layer in the block editor and it is on layer 0.
When I click on any of the blocks, all the information appears to be correct, ie: door numbers, text style, etc. The text, however, just does not appear. Also I have never set any invisible text parameters and when I open the block editor, nothing in the invisible text area is selected or select-able.
Previous versions of this drawing, which I saved yesterday, display all block text perfectly. Perhaps there is a setting I accidentally hit which caused this problem?
I have tried repeatedly turning on all the layers, unfreezing, unlocking, changing parameters in the Style menu. I closed Autocad and turned the computer completely off and back on again.
GPS'd fire hydrant locations. The GPS points were exported to shape files and using Data Connect, these points locate correctly in Map (using version 2009). The points have default styling...color, shape...and I want to use a CAD block of a fire hydrant to symbolize the points instead of the default square. Is this possible?
Clicking "Style" on the Display Manager to open the Style Point dialog box.
Next to the heading "Symbol:" clicking the ... button brings me to "Select a Symbol" pop up dialog box.
Next to the "Symbol Library:" drop down box, clicking the ... button brings me to the folder located at C://Program Files/AutoCAD Map 3D 2009/Sample/Symbols. There are 13 DWGs in this folder all called "Map - something.dwg" like "Map - electric.dwg" or "Map - water.dwg.
I can open any of these DWGs and they all provide multiple symbols to choose from in the "Select a Symbol" dialog box. However, none of these DWGs contain a symbol for a fire hydrant.
What other folders can be navigated to, in order to find other blocks? Can other CAD blocks be used as shape file symbolization or does the prefix "Map - xxx" in this folder mean that only these specific drawings will open for shape file symbolization?
How do I control the plot style of blocks?
Say I draw some lines on layer "0" and use the "block" command to make a new block. Next, I insert that block I just made onto some layer "X".
I am using .stb.
How can I control the plot style of the block?
Also, if the block is used as a civil 3d object, say a pipes structure, where does the plot style in structure properties fit into the hierarchy?
I have tried changing all the following variables to no affect: layer "0" plot style, layer "X' plot style, object properties plot style, stucture style plot style
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3
So i've got a profile of a waterline. To show my valves, bends, tees, etc. I made a style for each and used null structures set to no plot for my plan view and made blocks for each appurtenance to be projected for the profile view.
This job is going to bid with two separate contracts and there is one sheet of overlap. I need to show some pipes and appurtenances proposed on one sheet and existing on another.
The one problem i'm having is controlling the plot style of the blocks in profile view, I've tried changing the structure style, making a new layer putting the block on that and changing the layer plot style, everything I can think of. I need it to be controlled via a vp plotstyle setting because I have another sheet where it needs to be displayed differently.
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3
I am editing an existing block to change the lineweight and have tried using the REFEDIT command as well as double clicking the block to take me into the block editor and making my changes there. I am sucessfully able to edit my block and make the changes using both of these methods. Where I am running into an issue is that the block I have edited only retains its new settings within the drawing that I changed it in. If I insert that same block into a new drawing I have to re-edit the block again the make the changes that I want. Why are my blocks not retaining their settings from drawing to drawing.
View 9 Replies View Related