AutoCad :: Blocks Not Retaining Their Settings From Drawing To Drawing

Mar 5, 2012

I am editing an existing block to change the lineweight and have tried using the REFEDIT command as well as double clicking the block to take me into the block editor and making my changes there. I am sucessfully able to edit my block and make the changes using both of these methods. Where I am running into an issue is that the block I have edited only retains its new settings within the drawing that I changed it in. If I insert that same block into a new drawing I have to re-edit the block again the make the changes that I want. Why are my blocks not retaining their settings from drawing to drawing.

View 9 Replies


ADVERTISEMENT

AutoCAD 2010 :: Change Drawing Scale In Drawing Settings

Jul 25, 2012

I realize it may be a Civil3D question.  When I change my drawing scale in the "Drawing Settings" dialog box to 1"=40', for example.  The Annotative scale in the Properties Palette changes to 1"=40'_XREF.

View 2 Replies View Related

AutoCAD Dynamic Blocks :: Finding Number Of Times Specific Blocks Used In A Drawing?

Aug 8, 2013

How to find no of times specific blocks used in a drawing?

View 9 Replies View Related

AutoCAD Dynamic Blocks :: Stretching Same Parameter In All Blocks In Drawing From One Field?

Jul 15, 2011

How do I manipulate a height parameter all of the dynamic blocks in the drawing from one single field? Say a field located in the drawing properties or on the drawing itself.

For example:  Multiple blocks of different walls of same height with other blocks of things on located on those walls, dependant on the wall height, all linked to and changed by a single field. Possibly a Wall Height field located in the custom tab of the drawing properties.

I can pickout each of the blocks and change them at the same time in properites menu because they all share the same parameter name.  I would just like to have that height parameter of every block in the drawing, that has that specific parameter controled by a single field.  Which I could enter a new height at anytime that would change every block in the drawing to that height.

View 1 Replies View Related

AutoCAD LT :: Not Retaining Settings Or Commands

Feb 19, 2012

AutoCAD is constantly losing settings and commands that I give it. The Undo command is one of them. I'll set it to undo [ALL] and after a while (a couple of days maybe) I will find this command on a different setting. This has been happening to many other commands as well.

View 7 Replies View Related

AutoCad :: Saving Drawing With Plot Settings?

Oct 5, 2012

When saving a drawing why do my plot settings not save with it? As in the window I use and the scaleUsing 2007.

View 8 Replies View Related

AutoCad :: How To Change Settings For Opening Another Drawing

Apr 9, 2012

How to change the settings (if it has) for opening another drawing. because for example I opened an autocad file, and again i want to open another file, when I opened another file it will not display in the same window which I first opened, it is very hard for me to put my mouse pointer on the taskbar to choose that drawing and again return in another drawing, better if using the windows button inside the autocad. here is the image just to be clear on what i am trying to ask.

Untitled.jpg1.jpg

View 9 Replies View Related

AutoCAD 2013 :: Drawing Aid Dialogue Box Settings

Jan 24, 2013

My instructor has asked us to describe and list 5 settings that can be made in the Drawing aid dialogue box....what and where is this dialogue box?

View 2 Replies View Related

AutoCAD LT :: Drawing Blocks From Manufacturers?

Nov 5, 2012

Where I can download drawing blocks for cable racks? More specificaly I'm looking for cable ladder.

View 2 Replies View Related

AutoCAD LT :: Drawing Annotation Blocks

Jun 27, 2013

The text set in the Section Annotation Block Symbols move when the block is copied from one drawing file to another. Regardless if in the block editor, the position of the test remains the same.

View 6 Replies View Related

AutoCAD Map 3D :: Scanning Drawing For Blocks

Jul 29, 2011

I try to create a road sign GIS drawing. I would like to extract all "sign" block from our archived drawings. Is there a way to batch scanning 1000 drawings for a specific block name?

View 3 Replies View Related

AutoCad :: Drawing Title Blocks

Mar 30, 2013

I wanted to get opinions on the most efficient way of creating & saving title blocks, with regards to using them in future projects.

1. Create a title block in model space then save it as a .dwt file

OR

2. Create a title block in model space then save it as a block

I can't imagine there's a right or wrong way, just wanted get your input. Chances are you all know something I don't.

View 9 Replies View Related

AutoCad 2D :: List Blocks In Drawing?

Mar 1, 2012

I would like to make a list on my drawing of my blocks. Not with part reference. How do I do that?

View 9 Replies View Related

AutoCad :: Explode All Blocks Within Drawing?

May 2, 2013

Is there a way to do this within 2012 or would I need to use a script?

View 6 Replies View Related

AutoCAD .NET :: Variable To Pull Zone Settings For Drawing

Jun 7, 2013

Is there a variable I can pull to get the coordinate system zone assigned to the drawing?  For instance, if my drawing is in UTM coordinates, zone 13, is there a (retrievable) variable set to "UTM27-13"?

View 1 Replies View Related

AutoCAD Civil 3D :: LSP For Drawing Settings -> Object Layers

Aug 19, 2013

Would there be a way to write a lsp to change all the drawing layers? I need to change a bunch of the object layers, multiple times, and don't want to make another template with the other layers. I have 3 sets of layers needed?

Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation

View 2 Replies View Related

AutoCad 2D :: How To Change CBT File Settings From Imported Drawing

Dec 5, 2013

I'm using an embedded ACAD, and getting half-finished field-to-finish dwgs from a sub-contractor. I'm having a hard time getting his lineweights to conform to the output needed.

View 6 Replies View Related

AutoCad :: Adjust Default Settings Of Drawing Units?

Apr 13, 2011

how to adjust the default settings of my drawing units. I have adjusted these so that if I create a new drawing they are set as I want them. But when I output a drawing from

I work with a land surveying package. I use both AutoCAD 2006 and R14. When I export a cad dwg from the survey software and open it in R14 my drawing units are as I want them E.G Direction Control = North = 270 and should be set to clockwise. If I open the same exported drawing but in 2006 the settings change. If I create a new drawing in 2006, the settings are as I want them.

View 3 Replies View Related

AutoCAD Architecture :: Copy Blocks To Another Drawing

Apr 11, 2011

I have a question.  I have several 3d models i've set up with 3d blocks in each one.  They're separate to cut down on drawing size.  I want to create a database of blocks so to speak by copying all the blocks into one drawing.  I tried going through Design Center to copy the blocks in, but it won't let me just copy them.  Is there a simple way to do this?

View 1 Replies View Related

AutoCAD Map 3D :: What Is The Fastest Way To Extract Blocks From A Drawing

Jan 21, 2013

What is the fastest way to extract blocks from a drawing

View 3 Replies View Related

AutoCAD 2013 :: Blocks Will Not Show Up In Drawing

Oct 11, 2013

I am trying to copy and paste a bar scale from one drawing into another at 0,0….  But it won’t show-up, as you can see from the attached there are 17 blocks in this drawing but none of them will show-up, I have even tried to re-insert the block but still no joy…..  I have re-started AutoCAD, even the computer but still nothing…….                                                                                                  

View 3 Replies View Related

AutoCAD Dynamic Blocks :: Not Enabled In Drawing

Oct 15, 2013

I have a very simple dynamic block that works when I test it in the editor but refuses to work when inserted into a drawing. I am not a newbie to dynamic block creation/editing, but it has been a long time since I have had to create one and this has got me stumped.

Is it possible that my employer has somehow blocked the use of dynamic blocks in drawings?

View 3 Replies View Related

AutoCAD .NET :: Listing All Blocks In Drawing File

Jun 29, 2011

What i want is to create a treeview that lists all the blocks. I can achieve that trough iterating the blocktable record.

No i can populate all the blocks in the control.

But how can i get a list of all block references in model and paperspace.

View 9 Replies View Related

AutoCAD VB :: Edit Attributes For All Blocks In Drawing?

Mar 6, 2012

I am looking for a macro that can edit the default value off the attriburte for each block in the drawing. The new value must be empty.

But there is one exception. When the length of the current value is equal to 8 then the macro's has to do nothing and the macro must continue to the next block.

View 5 Replies View Related

AutoCAD Civil 3D :: Restore All Original Settings For Drawing File?

Dec 27, 2012

I recently switched from Civil 3D 2012 to 2013 student version because when I initially installed the program I probably messed up some of the settings that I shouldn't have for my entire application. After reinstalling it, I noticed that the program seems to run just fine but the settings for the original file I'm trying to work with remain, such as label settings, linescales, etc.

I want my drawing to match the settings of new drawings when it comes to labels, scales, and anything else I might have changed. Is there a way to apply these settings to my original file? If not, is there a way to at least make sure the label styles can be reset? I don't want any changes to the settings I made to be present in my file.

View 4 Replies View Related

AutoCAD Inventor :: Ilogic To Change Drawing Document Settings?

Jun 3, 2013

Im looking to make a simple ilogic rule that can toggle an option in the document settings, the setting I would like to change is the Document settings> Modeling> Participate in assembly and drawing sections

I would like a form to switch the option on and off quickly, its a really usefull function however I know a few of my colleagues wont use if they cant find it easly.

View 1 Replies View Related

AutoCAD Civil 3D :: Importing CTB File Into Plot Settings For Drawing?

Jul 12, 2010

I can't remember how to import a ctb file into my plot settings for a drawing?

View 9 Replies View Related

AutoCAD Civil 3D :: Settings Tab In Toolspace Shows Wrong Drawing

Aug 13, 2013

Set up the settings tab in Toolspace to always skip to display the drawing that I'm not working in?  I just spent half an hour creating expressions in the wrong drawing,

View 2 Replies View Related

AutoCAD 2010 :: Extract Blocks Name And Quantities From Drawing?

Apr 2, 2012

i basically need to extract all the blocks and quantities used in a drawing as the drawing we make are usually really big and takes time to pan around to count all blocks.

View 2 Replies View Related

AutoCAD Dynamic Blocks :: Inserting Table To Drawing

Dec 30, 2013

I created a dynamic block table and I try to insert into a drawing, however, it doesn't work, all block data are gone.

View 4 Replies View Related

AutoCad :: Make Dynamic Blocks - Three Dimensions In Drawing

Jun 27, 2013

I produce windows and doors. and I reproduce the same drawing in the attachment a lot.

Is there a way to make it a dynamic block where I change the three dimensions in the drawing and the whole thing grows or shrinks symmetrically and proportionally?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved