Would there be a way to write a lsp to change all the drawing layers? I need to change a bunch of the object layers, multiple times, and don't want to make another template with the other layers. I have 3 sets of layers needed?
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation
Any way to change the setting in Object Viewer that will let you orbit around the cursor instead of the center of the screen? In object viwer, orbit is only constrained around the middle of the screen. To me, it would make sense to have it rotate around the cursor like in model space.
View 2 Replies View RelatedI am having problems plotting out parcels and creating label settings. I think I am missing an important concept in the object and display tab of setting creation. I am not finding going through the documentation. What I have found is not well explained.
I started with the OOB alignment settings. I noted that the Basic setting has a description that states the object will take on the settings of the layer it is created on.
I noted that if I adjusted the alignment properities to "Basic". I could then move the 'roadway' alignments to P-RD-CL and the swale alignments to P-SWALE-CL. Freezing the P-SWALE-CL then turns off the swale CL's, but keeps the roadway ones on.
I am looking for a fast way to determine which styles this works for or the area of the documentation that better explains how this works.
I am starting to explore creating label styles the same way. That way I can double or triple label pipe networks such that identical styles are labeled on an E&S layer and a PCSM layer and the individual lables can be dragged on the two different sheet layouts in the same file to avoid text over writes.
I recently switched from Civil 3D 2012 to 2013 student version because when I initially installed the program I probably messed up some of the settings that I shouldn't have for my entire application. After reinstalling it, I noticed that the program seems to run just fine but the settings for the original file I'm trying to work with remain, such as label settings, linescales, etc.
I want my drawing to match the settings of new drawings when it comes to labels, scales, and anything else I might have changed. Is there a way to apply these settings to my original file? If not, is there a way to at least make sure the label styles can be reset? I don't want any changes to the settings I made to be present in my file.
I can't remember how to import a ctb file into my plot settings for a drawing?
View 9 Replies View RelatedSet up the settings tab in Toolspace to always skip to display the drawing that I'm not working in? I just spent half an hour creating expressions in the wrong drawing,
View 2 Replies View RelatedAfter reviewing many similar topics, I am still at a loss here. We are finding that the settings for using shift to deselect items seem to be changing within individual drawing files.
I open 2 drawing files. In one, the shift/deselect works fine, but in the other is does not deselect anything...
Further - within the non-working drawing file, the option to activate 2 hotpoints on a line and then stretch that line no longer works either.
Like everyone dealing with these shift/select/deselect issues, we are wasting an extreme amount of time trying to resolve issues that never seemed to be issues with past versions.
I've used E- for Existing and P- for Proposed for my layers and/or style names. For Object Layers, I've used OBJ- with modifiers and set the layers inside the styles to 0. This works ok, and Civil 3D objects obviously stand out and are easily isolated thru layiso and such, BUT having styles set to 0 presents a problem when dumbing down a drawing to send to another firm. The C3D Objects that are dumbed down are on layer 0 which isn't good.
We're generating a new template for 2013 and want to gear it towards the National Cad Standards on some level and do away with 0 as the style layer and actually have the style layers set to something other than 0.
My initial thoughts from a simplistic standpoint are:
V- for Survey and Existing features
C- for Proposed features
I understand there's many more designators. We mainly do Civil and Utility work.I know V is a designator for Survey but can it cover and should it cover existing features too that aren't surveyed, for example if we receive mapping from someone and want to reassign some layer names? Is C- strictly for Proposed/Design work?
I'm reviewing a template we're working with someone on and they assigned the layers inside an Existing Surface Style to C-Topo-Majr and C-Topo-Minr. They assigned the layers inside the Proposed Surface Style to C-Topo-Majr-N and C-Topo-Minr-N. The only difference is the N for New, between the style layers.
Shouldn't the Existing Surface Style layers start with V-?Just trying to get some feedback on a simplistic approach to Layer naming and keeping with the National Cad Standards on some level.
I have created a drawing template in C3D with layers, blocks, descriptor keys and all the fun stuff, but this was just for the survey section of the engineering group I work with. Now the engineers, who had another template set up with design layers which they don't use but may want to use, asked me if I can add their layers to my template. The have about 2000 layers and I do not want to manually add this information. Is there any way I can either export their layers or merge the layers?
View 3 Replies View Relatedso i have a file that when i zoom extents i can not see or select anything by window but when i use the command erase all is says there are 42 objects in the file but i cant find them
rename attached file ext to dwg
I'm working a drawing orginally developed in C3D 2013 and am now working in 2014. I have developed a speadsheet in Excel 2007 and have link pasted a portion of a worksheet into my drawing. Later, i have to re link paste the same portion of the worksheet after making some edits and the object will now not paste into the drawing.I have tried the following without sucess:
-Load drawing into C3D 2013 and try to paste
-Load drawing into C3D 2014 on another machine and try to paste
-Save excel spreadsheet as a .xls file instead of .xlsx and try to paste
-Run audit in 2014 (no errors) and try to paste
Other drawings loaded into 2014 work OK when link pasting.
Is there a way to count all types of object in a drawing?
Like this:
Command: ????
Number of blocks: 22
Number of 3d faces: 2
.
.
Number of hatches:1
"Qselect" does it but it can be very slow if there are a large number of objects in the file.
I guess this information is savea as "meta data" and can be accessed even without opening the file???
I got this weird error on Civil 2012, I have been working with Civil products for a few years now and have never had this happen till today. Other co-workers have had the same problem which only started to occur yesterday.
The Error; Was working on a drawing with multiple layers, surfaces, alignments, assemblies, corridors, and of course point groups. The screen froze for about 2 seconds when I was attempting to hatch an object, after the quick freeze all my layers (each assigned different colors) turned on (visible) and changed color to white. Everything on the drawing became inactive except for the save button and the close button. So I saved it and closed the drawing, I had other drawings open at the same time and these were never affected (still had color and could work on them). Since the save button was still working I never lost any work that I had completed but it is still annoying having to close and open the drawing since larger drawings can take a few min to open.
Is this an Autocad issue or is it something with our machines/network?
Intel(R) Xeon(R) CPU @ 2.53 GHz
6 GB Ram
NVidia Quadro 600
64-bit Operating System
Is there any way to determine the source drawing of a dref'ed object? I'm not seeing anything in COM or the .NET API's, hopefully I'm just not looking in the right place.
View 5 Replies View RelatedHow shall I draw lines into a created surface using raw or full description of ascii file format(COGO)
for example in the imported file i have points to describe a road center line(CL),or edge of the road(ERD),breaklines(BRKL) and want lines represented by the descriptions to be drawed in the surface so that i can use the lines as guides in profiles design.I didn't want to use point number which are not serially ,and have tried to use point grouping without any success
The attached file could be of good use.
How can I copy a profile view style from one drawing to another? I can't seem to locate the ones I created in toolspace to be able to drag them from one drawing to another.
View 2 Replies View RelatedWhen I click on a civil 3d object the contextual ribbon will light up (which is fine) but instead of my cross hairs comming back in the drawing window I get the pointer that would be used to select an item in the ribbon (in the drawing area) and I have to click in the drawing area to get my cross hairs back or to grip edit the object or to delete the object.
Is there a option/setting I need to change to be able to get me cross hairs back after selecting a civil 3d object?
Just move to Civil 3d 2012, this worked just fine in '11...
I realize it may be a Civil3D question. When I change my drawing scale in the "Drawing Settings" dialog box to 1"=40', for example. The Annotative scale in the Properties Palette changes to 1"=40'_XREF.
View 2 Replies View RelatedI am editing an existing block to change the lineweight and have tried using the REFEDIT command as well as double clicking the block to take me into the block editor and making my changes there. I am sucessfully able to edit my block and make the changes using both of these methods. Where I am running into an issue is that the block I have edited only retains its new settings within the drawing that I changed it in. If I insert that same block into a new drawing I have to re-edit the block again the make the changes that I want. Why are my blocks not retaining their settings from drawing to drawing.
View 9 Replies View RelatedThere are some layers in my drawing that won't delete in the layers properties manager. I don't know why. It gives me 4 possible reasons:
- It might be layer 0 or a Defpoint (whatever that is).
- It is the current layer
- It is an Xref dependent layer
- It is a layer containing objects
But none of these, to my knowledge, apply. There could be things on the layer that I'm just not seeing, but I've looked thoroughly. I even zoomed out to the extents, highlighted the whole area, and clicked the erase tool, but it still won't go away. I got the file from another computer, so it might be an Xref dependent layer and the Xref'ed files just didn't come with it. How would I be able to tell - and how could I remove the Xref dependency?
Other than that, is there any other reason a layer won't delete? Can I force it to delete?
All of my image layers have randomly converted to smart object layers and I can no longer resize them in the ps document. Why would it do this and how can I undo it?
View 3 Replies View RelatedMy problem is this; I have several production sets (Sheet Sheets) of drawings in which the referenced drawing's layers are not carrying over.
To clarify; In my base file file I went through and froze out and changed the color of several layers. When I reference that drawing into my sheet sets all of the layers are turned back on and set to the original colors. I should also note that the offending referenced drawing is also an xref. It is a large architectural drawing with several dozen nested xrefs refernced into a base file in which I have inserted blocks and symbols.
I've tried different VISRETAIN settings and other options. Nothing seems to work. I've also went through various forums and tutorials to try and solve the problem before I posted here. I'm at my wits end!
i have a 2012 version of autrocad and i have a problem with my 3Dobject settings.
when i move my cursor over any object (eg:box) placed in SW iso view,I cannot see the bottom face of box neither the back or right side. The object should become transparent when i move my cursor over it,but instead the object is purely solid.When i want to shell box from bottom it becomes a problem.
I have a logo that I am working with and I need to make it a 3D object for what I'm doing in After Effects. I am trying to make it 3D so I can edit it in repousse because all I really need to do is extrude it.
I've tried the different options in the 3D drop down menu but none of them bring me to edit in repousse.
Also, I know that I can make it 3D in After Effects my making multiples of it and what not but I don't want to go about it that way. Also, I'm working with CS5.5 and the 3D renderer plugin in After Effects is only available in CS6.
I'm working with 27 artboard in illustrator for one project. I would like to select the object I need to get to in my layers panel and have illustrator "jump/navigate" me to the object where it resides on the artboard. Is this possible?
View 3 Replies View RelatedI would like to know how to write a routine to thaw all layers in current drawing and multiple xrefs; then freeze all, then thaw only certain layers globally for a drawing that is open. Such as a dimension plan will thaw only *-BLDG, *-DIMS, *-RD-*, *BNDRY.
I would like to create one that will fit every project which has a different xref name.
My Object Snap settings will not stay "set". Each day i have to reset the options i wish for each dwg i open up that day. also the settings do not stay set even when working on same dwg for several hours. Every couple hours i have to reset them to my options.
View 2 Replies View RelatedWe use ordinate dimensions for all holes in parts. Unfortunately there seems to be features frequently left out of ordinate dimension mode. For instance, by default Inventor uses center and quadrant object snaps. Unlike in normal dimension mode, there is no right click option for disabling quadrant snaps. This is a constant annoyance, especially when dimensioning a print with a lot of holes. Is there any other way or hidden setting to disable the quadrant snap? In addition, add member is missing from the new "marking menu" completely so we have to enable the old right click menu to get it back. Are we the only ones using ordinate dimensions?
Inventor 2013 SP1.1 update 1
When saving a drawing why do my plot settings not save with it? As in the window I use and the scaleUsing 2007.
View 8 Replies View RelatedHow to change the settings (if it has) for opening another drawing. because for example I opened an autocad file, and again i want to open another file, when I opened another file it will not display in the same window which I first opened, it is very hard for me to put my mouse pointer on the taskbar to choose that drawing and again return in another drawing, better if using the windows button inside the autocad. here is the image just to be clear on what i am trying to ask.
Untitled.jpg1.jpg
My instructor has asked us to describe and list 5 settings that can be made in the Drawing aid dialogue box....what and where is this dialogue box?
View 2 Replies View Related
