My Object Snap settings will not stay "set". Each day i have to reset the options i wish for each dwg i open up that day. also the settings do not stay set even when working on same dwg for several hours. Every couple hours i have to reset them to my options.
View 2 RepliesWe use ordinate dimensions for all holes in parts. Unfortunately there seems to be features frequently left out of ordinate dimension mode. For instance, by default Inventor uses center and quadrant object snaps. Unlike in normal dimension mode, there is no right click option for disabling quadrant snaps. This is a constant annoyance, especially when dimensioning a print with a lot of holes. Is there any other way or hidden setting to disable the quadrant snap? In addition, add member is missing from the new "marking menu" completely so we have to enable the old right click menu to get it back. Are we the only ones using ordinate dimensions?
Inventor 2013 SP1.1 update 1
I noticed that icons existing in ACA 2009's Object Snap Settings Dialog Box disappeared!
View 9 Replies View RelatedI am trying to select some portion of my drawing for layer change, but when I panning the view for additional selection, I lost the grips of first selected entities.
View 2 Replies View RelatedAs I move my cross hairs over an object in a drawing it wants to select or highlight the object without clicking on it. On detailed models/drawings it takes alot of time and is almost impossible to use. Is there a way to turn or toggle this function off?
View 2 Replies View RelatedThe problem is that AutoCAD 2010, does not recognize any object snap commands, all the other comands work just fine.
I have reinstalled the program and don´t work.
What could be?
Is there a setting I can change so if I am drawing an object (line, polyline, etc.) if I am snapping to a contour line, the objects will NOT take on the elevation of the contour line?
View 3 Replies View RelatedFor as long as I can remember, across all versions of Autocad, I've had problems picking the right item on the popup menu for object snap (shift-right click). It frequently picks the item below the intended one, i.e. it will pick Parallel rather than Perpendicular. Trying a second time works every time. This problem has been so consistent that I don't believe it is user error. The item is highlighted, after all. There is no way I'm repeatedly missing it. Is it possible to calibrate the mouse in Autocad?
View 9 Replies View RelatedObject Snap.jpg I want to pick the point where the circle hits the edge of the box but there seems to be no Intersection there. But they are on the same plane!
View 9 Replies View RelatedI am constantly having to change my leader settings.... every time I open AC. On the third tab, I want both of the "Multi-Line Text Attachments" to be set to the middle of the top line option. But for some reason, the Text on Left Side always defaults back to Middle of Bottom Line.
Is there a system variable or something that I'm missing?
All of my OSNAP settings are reverting back to some default every time I open AutoCAD. This includes the snaps that are auto (I set endpoint, intersection and perpendicular. When I reopen, I get a random medly of snaps like tanget, parallell, insertion ect.) Object Snap tracking also truns off.
The settings in my profile also turn off (eg. marker). I have tried saving the settings to my profile with no luck. All of my other profile setting remain untouched.
I'm on Civil 3D 2012
I have a rather simple 3rd party custom object... I tried to get its bounding box but the coordinates that come back don't seem to relate at all to the object.
What I'd like are the coordinates of two nodes the object contains...
Is it possible to apply the autocad cursor in some why with the node object snap to get their coordinates?
In LDDT, I was able to create points and manually assign a point number.
I know in Civil 3D 2013, i can assign a point number also by changing a toggle under Point Creation Tools to False.
My problem is that everytime I close out of that box and get back in, it reverts the toggle back to TRUE so I have to keep changing it back to False as well as the Next Point Number. In the above example, the Next Point Number should be 1147 (which is after my manually created point 1146) but it keeps going back to 33 which is the next available number after #1.
I'm trying to snap one object to the other with vert snap.
It's trying to snap from the center of my object rather then the vert I am hovering over. In the Snap settings I have only "vertex" checked so it should snap to whatever vertex I hover over but no...This keeps up I'm going back to 2008 when all this worked fine.
You would like to adjust your SNAP settings within your software.
View 1 Replies View RelatedI have a drawing of Clock Face here (see the picture below), which requires donut for the outer circle. My first question is, looking at the picture, what would be the limits, grid, and snap settings? I made an attempt with the limits (0',0') (12',9'), with Grid =0'-0 1/2", and Snap = 0'-0 1/4", but it didn't work out well. I tried to make the Snap 0'-0 1/32" but it couldn't, neither 0'-0 1/16", nor 0'-0 1/8". Why can't I set the Snap to 0'-0 1/32"?
Next, I would like to know how the outer circle could be constructed with donut. The small inner circle below it is of 1'-11" + 1" + 1" in diameter, that is, 2'-1". If then the Donut (as shown) is to be of 24" inside x 1" thick, the 2'-1" DIA circle would disappear within the thickness of the Donut, leaving no gap between them both. How could this be drawn,
How to keep the snap mode settings from disappearing after certain commands. For example every time I use a lisp routine I have to go and reset my settings because they are no longer the way I had them set before I performed the lisp command.
View 9 Replies View Relatedcan I snap an object/vertex/edge to another object straight in one axis?
I'm coming from Rhino 3d, where this is possible by holding the shift key.
3ds Max 2012 SP2
i7 2600
16GB RAM
Geforce 560ti OC
why i can set my autosave and autosave location and for the day it will stay on but sometime during the week it will uncheck by itself. could it be from a update?
View 3 Replies View RelatedWhenever I create a new layer in the Layer Manager, and I set the color, the color reverts back to whatever it defaulted to when I created the new layer - usually the color of that layer that is current, since everything is just duplicated.
To fix it I have to go back into Layer Manager and set the color a second time.
Civil 3D 2012
Win7 64 bit
Capable Dell Precision
everything up to date
Dell Precision 7core 8GB RAM
NVIDIA Quadro FX 1800M
I have a couple of different files that I'm working on that I want a particular text box left-justified. I will get it left-justified and save the file, but the next time the file is opened the text is centered.
View 2 Replies View RelatedAutoCAD exchange or any books that are available on the web. Everyone simply says "here, it exists" but I can't find a description of what object snap enforcement is, nor have I managed to figure it out from its behavior in AutoCAD.
View 4 Replies View Relatedusing autocad 2013.
is there 3D object snap tracking?
I get inconsistent results when I try to use the object snap to a point such as an intersection in an xref. Sometimes it works and sometimes it does not. Even the "nearest" doesn't seem to recognize the xref consistently. Is there a way to insure that the point is recognized?
View 9 Replies View RelatedHow to use keyboard shortcut to allow for a temporary override of my "Nearest" OSNAP. I often find myself pulling leaders from splines and/or circles and need the "Nearest" OSNAP active.
I was in CUI and saw the temp override shortcut key was setup but inactive as it has no ties to any keys. I also saw others setup with shortcuts keys and decided to give them a demo. While in a line command (for example) i held 'SHIFT + C' to trigger the temp override of "Center." It didn't seem to work. Dynamic input popped up as if i was entering "C."
I want 'SHIFT + N' to be temp override for "Nearest" OSNAP.As a side note, i was able to set up ACAD to zoom extents and close dwg simultaneously with 'CTRL + W' without any hiccups.
When using object snap feature, if a particular point has multiple roles, by which I mean it could be {endpoint, node point, circle, intersection, etc.} at the same time, is there a way to toggle the snap point selection?
mt.png
For example, does there existKey or key combination 1: Change the object snap mode to “single” amongst all enabled modes. Key or key combination 2: Iterate one by one through all available modes.
tg.jpg
I no longer seem to be able to snap to the nodes of block attributes.
My osnap settings are set to snap to nodes. I wonder whether it's a variable that on my previous version of AutoCAD was set to one thing and the new version defaults to another.
I love the feature of Object Snap Tracking but for some reason or another it has stopped working. I normally use F11 to turn it on or go through the drafting settings menu to turn it on. The Object Snap Tracking box is checked and should work, but it doesn't. Is there a magic variable that needs to be set?
View 2 Replies View RelatedHow do I snap my new line to the edge of another object? A workaround is drawing the line over the object, and snap the point back using intersection snapping. I hope you understand.
drawing.jpg
Using AutoCAD from another drafting program and trying to determine if AutoCAD has a feature I have become used to. The program I am using is Vectorworks and they have these items called loci. They are basically just snap points that do not print and are not actually geometry. They are great though for aligning items and referencing points. Is there a similar item in autocad?
View 1 Replies View RelatedI am looking for the perpendicular function specifically. However, at this point I can not find the tool bar for any of the snap functions.
View 3 Replies View Related