AutoCAD Civil 3D :: How To Control Plot Style Of Blocks
Feb 26, 2013
So i've got a profile of a waterline. To show my valves, bends, tees, etc. I made a style for each and used null structures set to no plot for my plan view and made blocks for each appurtenance to be projected for the profile view.
This job is going to bid with two separate contracts and there is one sheet of overlap. I need to show some pipes and appurtenances proposed on one sheet and existing on another.
The one problem i'm having is controlling the plot style of the blocks in profile view, I've tried changing the structure style, making a new layer putting the block on that and changing the layer plot style, everything I can think of. I need it to be controlled via a vp plotstyle setting because I have another sheet where it needs to be displayed differently.
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3
View 6 Replies
ADVERTISEMENT
Mar 11, 2013
How do I control the plot style of blocks?
Say I draw some lines on layer "0" and use the "block" command to make a new block. Next, I insert that block I just made onto some layer "X".
I am using .stb.
How can I control the plot style of the block?
Also, if the block is used as a civil 3d object, say a pipes structure, where does the plot style in structure properties fit into the hierarchy?
I have tried changing all the following variables to no affect: layer "0" plot style, layer "X' plot style, object properties plot style, stucture style plot style
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3
View 7 Replies
View Related
Aug 9, 2010
How does one convert an stb file to ctb. I have tried using the CONVERTPSTYLES command to no avail. After selecting the stb for conversion, i am getting an error message stating that the stb does not contain a color mapping table and cannot be used to convert drawings.
View 9 Replies
View Related
May 1, 2013
Civil 3d 2012 - Is there a way to control the size of the text box in by dim style? It is way too close to the text.
View 3 Replies
View Related
Aug 17, 2012
I am trying to set default plotter and plot style so I dont have to select every time but AutoCAD is not keeping the setting. I went to "Options", "Plot & Publish" and selected my plotter I want to be default but it's not keeping that setting. I also changed the default plot style under "Plot Style Table Settings" under "Plot & Publish" but AutoCAD is not keeping that setting as well. URL...
View 1 Replies
View Related
Jun 26, 2013
I'm looking to get a "template" or example with layers and plot styles for erosion control plans.
I have recently started with a new company and I'm one of the few that use AutoCAD. I have been unable to locate a good plot style or layers for any type of detailed plans. I know how to create plot styles, but I didn't know if there was a place to find "templates" or a drawing to copy the layers and a plot style.
View 1 Replies
View Related
Aug 15, 2012
We use STB plot style tables for all of our drawings. I have several general note styles setup in Civil 3D 2012. When you pull the note text out so that you have a leader, the leader does not plot per the plot style assigned to the layer that the note is set to display on on the General tab. It appears as the proper color and freezes with the layer properly, but it plots with the settings of the plot style assigned to layer 0. Is there a reason that the leaders don't use the plot style setting form the layer it is displayed on?
View 4 Replies
View Related
Jan 7, 2014
I have several SHP Connections that I am using as background. I can use the Style Editor to get the individual SHP Lines/Polygons/blocks to be the appropriate colors for the information that they include (Property Lines, Buildings, Utilities, etc)
The problem is in plotting this information. The settings in my tried and true .ctb file don't seem to apply to the SHP data. Everything else that actually exists in the drawing behaves correctly, but the SHP data plots as it appears on the screen.
I am using C3D 2012
View 2 Replies
View Related
Aug 29, 2013
I am a Mac user and new to AutoCAD. I am enrolled in a CAD class this semester and the instructor for my session is requiring Windows. Supposedly this is because AutoCAD for Mac does not allow for proper printing on their plot style setting.
I understand that I can install Bootcamp and Windows on my computer, but I'd really like to avoid that if I can. If I were to do my work on my Mac and then digitally transfer my files to a PC for printing purposes, would my files become corrupted or compromised in any way?
View 2 Replies
View Related
Oct 9, 2013
AutoCAD - Why does the Normal plot style plot in color? Black seems to make a lot more sense. Almost everyone in Architecture uses black prints most frequently so that should be the default. And you can't adjust Normal to all black. So what was AutoDesk's reasoning?
View 9 Replies
View Related
Nov 8, 2012
I am an experienced Autocad user, and plotted with ctb files. I installed 2013 and plots come out not as i want. Although i assigned a ctb plot style, lines come out according to an unknown plan to me. I attached the file. It seems that the lines are influenced by the ctb file, but some colors are fadded I found it. i had to assign the color black to all colors, since it plotted with colors, on the black and white plotter. But a new problem arose. now i don't see colors when i am in the layout, all lines are white!
View 2 Replies
View Related
Jul 7, 2013
anytime i create a viewbase i need to define the scale , visibility, hidden lines , orientation etc...
is there a way to save a style ? most of my details in 3d repeat the same settings i use autocad 2014
View 9 Replies
View Related
Aug 17, 2011
Running AutoCAD 2009 on Win 7, how do I get a drop down box for text style control, similar to my dim style control etc, onto my toolbar at the top? I've tried clicking on customize and dragging it but it won't move. Other users of Acad 2009 in our office have it but I can't see how to add it to the toolbar, only the icon?
View 3 Replies
View Related
Jun 12, 2013
Is there a way to search for a text style in a civil style? I have a text style that our company is trying to get rid of and I would very much like to not have to go through our 72 company styles.
AutoCAD Civil 3D 2014
HP Z620 Workstation 64-bit
Duel Intel Xeon E5-2620 @ 2.00 GHz
Ram: 48 GB
View 1 Replies
View Related
Jan 3, 2014
I am using a custom plot to pdf routine(Autocad 2012 x64); everything works ok, I can assign different plot styles but for some reason I cannot assign the "none" after I used a different ctb file. A snippet is bellow:
BlockTableRecord btr = (BlockTableRecord)tr.GetObject(spaceId, OpenMode.ForRead);
Layout lo = (Layout)tr.GetObject(btr.LayoutId, OpenMode.ForRead);
// We need a PlotInfo object linked to the layout
[Code]....
When trying to assign the "none", the code fails. I don't know what I am missing (if I am not wrong it used to work with Autocad 2010?)
View 8 Replies
View Related
Nov 9, 2011
how to convert a ctb plot style to a stb plot style?
View 2 Replies
View Related
Feb 15, 2012
Trying to print a DWG to a PDF.
However, my CTB plot style is missing.
The list of STB plot styles are available.
View 3 Replies
View Related
Jul 7, 2011
Here's what I'm trying to do.
1. Create a layer that is Color 250.
2. Create a Plot Style that can have the true color 255,255,255 set.
It seems I can only use the 255 default AutoCAD index color palette. I would like to have some solid filled hatches to be the physical color 250 in the drawing, but I want these objects on a layer that plots the true color 255,255,255. The reason, is because I want to use these solid filled hatches as a mask. I'm not going to use that as an alternative.
I just don't want these solid filled hatches to be white. I can live with it, and it's working fantastic for the use I need but am just trying to see if this option is available.
View 4 Replies
View Related
Apr 18, 2012
AutoCAD MEP2013
Tried to print for the first time running MEP2013, and my plot style is missing.
I tried convertpstyle and had no success. Convertpstyle has worked in the past.
View 1 Replies
View Related
Nov 29, 2012
I have a stationing line. I've used the block PTTICL to make ticks. The ticks display perfectly. I'll run through a plot preview and the ticks show on the plot preview. I push plot go to the printer and the ticks are not plotted.
I've checked the layer. They are on a layer that should print.
I've checked the block. The block is created on a layer that should print.
I've run through a number of options regarding the alignment label properties and found "display" to be equal to "true."
Everything else plots just fine. Only the station label ticks refuse to plot. My project is fairly short so the work around was to put a poly line right on top of the tick mark.
AutoCAD Civil 3D 2013.
View 5 Replies
View Related
Jan 2, 2013
I am trying to change the default label styles for AddSegmentLabel under general styles using .NET...
Dim X As Autodesk.Civil.Settings.SettingsCmdAddSegmentLabel = CD.Settings.GetSettings(Of Autodesk.Civil.Settings.SettingsCmdAddSegmentLabel)()
X.Styles.LineLabel.Value = strChildStyleName ... says name does not exist
or
X.Styles.LineLabelStyleId.Value = oidChildStyle ... "The type of objectId is wrong"
If I manually change it to a child style and then check the values, they are the same as what I'm trying to set them to. If you use a "parent" style then these both work. Am I doing something wrong or this another limitation?
Civil 3D 2013 - Windows 7 Pro 64 - Dell T3500 - Xeon 2.67 - 24gb - Quadro 600
View 1 Replies
View Related
Feb 21, 2005
I've plotted many drawings and I've always just taken it for granted that the plot style table that I typically use, monochrome.ctb, would be there to select in the plotting window. Usually, the drawings from my customer, have this option available to me in the plot style table when I get ready to plot. However, a few have come to me recently in which it was not available. Instead, the drawing had a monochrome.stb which does not plot out with a true monochrome appearance. I do not want this. I do not know how to get the monochrome.ctb style from my other drawings to work in my new drawings that only have monochrome.stb. I know very little about the different plot styles and how to modify them or import/export them. From what I gather by browsing this site is that you might be able to save plot styles to a folder in your computer and then import them to your drawing. Is this true? How I can get this monochrome.ctb to work in my drawings that only have monochrome.stb??
View 9 Replies
View Related
Aug 5, 2013
How do you download the new plot sytles from your page set-up? Where to get it from your autocad file samples or set ups?
View 2 Replies
View Related
Jan 26, 2012
new at autocad 2012 (previous CAD07 user)im having trouble setting up my page, never had a problem with this before..... i need an A4 scaled drawing in paper space.
my current setup....
paper size: A4
plot area: extents, ticked centre the plot
scale: 1:1
the result: titleblock cut off on left and right sides
its only when i need A4 size (red margins!) A3, A2 etc are fine....i dont know what else is needed? I installed CAD12 only a few days ago and im the first and only AutoCAD user at my work. Im not sure if there's some intial setup settings that are required.
View 5 Replies
View Related
May 9, 2013
We have 2005LT for kitchen design. I need to recover or find a pen assignment. The "Plot Syle Table (pen assignments) window is showing "peacock.ctb (missing)." Is there a way to recover this setting?
View 4 Replies
View Related
Oct 3, 2013
Essentially, I've got a bunch of extruded polylines - so, some 3-d shapes - that I'm viewing in a new layout/'viewport' (?), which is set to SW Isometric view in '2D wireframe' viewing style. I've got my lines in different colors, mapped to be all black but different line widths in a custom Plot Style .ctb file.
So, when I change the 'page setup' to "display plot style", everything seems fine. All the lines go black in the viewport, and it seems as though I've configured everything correctly. When I preview an export to .pdf, however - or actually export it - this is lost. The export comes out in color.
I've done exporting using both EXPORTPDF, and PLOT, in both cases making absolutely certain that the .ctb file is being linked correctly (with EXPORTPDF, I've done it both using the 'current' page settings, and also 'override'), and with the PLOT, using the DWG to PDF converter,
I've looked through EXPORTSETTINGS, EXPORT...
On the same computer, with another earlier, simpler file, I have no issues accomplishing what I want.
For additional information/to make things more annoying for me, at this stage, the previous file which DID work seemed to conserve layer information, and allowed me to edit individual lines later, if necessary... This colored "I don't care about your plot styles I'm not going B/W" file seems to just be a flat image.
I've compared the two files in two tabs extensively, and can't seem to find ANY other difference, in any of the settings...
PC running Windows 8, Autocad 2014, Adobe Reader XI. Tried both the DWG to PDF and Adobe PDF plugins to export to PDF...
View 7 Replies
View Related
Jul 18, 2013
I need to create a new plot style from scratch.I am working for a company that is just starting up, and need a color dependent plot style (.ctb).Where is a good place to start, and what do I need to keep in mind while creating said plot style? How do you have yours set up?
View 2 Replies
View Related
Jul 27, 2006
I just completed a new drawing from scratch and I'm ready to plot. Problem is that the plot styles are missing. I tried opening another drawing to see if the plot style would show up, and it did. For some reason this new drawing is missing most of the plot styles.
Is there a way to load them into this new drawing? Also, is there a way to avoid having to load them everytime I create a new drawing?
View 6 Replies
View Related
Aug 9, 2011
I am using the monochrome plot style and plotting to PDF. My text looks great in the Plot Preview, but once actually hit 'Plot' the line weight of my text and dimensions appears super thick and heavy. They are also assigned to the lightest line weight in the layer property manager.
View 9 Replies
View Related
May 12, 2011
I've the same problem: in autocad Architecture 2011, in "plot style table", there is no "monochrome.ctb". Just mentioned "none" and "new"; How I can put in monochrome into the plot style table?
View 6 Replies
View Related
Jun 28, 2012
How to set up a dynamic block so I can control the size of an object through parametric dimensions that are linked (somehow) to a lookup table, spreadsheet, list, etc.?
What I'm trying to do (simplified) is place a block of a rectangle, select a size from a dropdown list, and have the block change to be that size - but I don't want to do this through visibility states as there are hundreds of sizes. The whole point is to be able to construct a list, lookup table, excel sheet, etc and link it to parametric dimensions in the block, or at least be able to link a stretch action to parametric dimensions. But the block editor will not allow me to associate a stretch action with a parametric dimension (at least I haven't figured out how to do this.)
View 1 Replies
View Related
