AutoCad :: Cannot Plot With Color Dependent Plot Style
Nov 8, 2012
I am an experienced Autocad user, and plotted with ctb files. I installed 2013 and plots come out not as i want. Although i assigned a ctb plot style, lines come out according to an unknown plan to me. I attached the file. It seems that the lines are influenced by the ctb file, but some colors are fadded I found it. i had to assign the color black to all colors, since it plotted with colors, on the black and white plotter. But a new problem arose. now i don't see colors when i am in the layout, all lines are white!
View 2 Replies
ADVERTISEMENT
Jul 18, 2012
We have some old drawings that use to have name dependent plot styles. We just need to plot them for reference and tried to convert them to the Monochrome ctb. But when you change it to Color dependent in the options nothing happens and if you type in pstylepolicy it tells me it is read only. When you plot it only gives you the option of the stb plot styles and will not change to ctb. The old stb styles are long gone and it wanted to print in color (lots of yellow back then).
View 1 Replies
View Related
Oct 9, 2013
AutoCAD - Why does the Normal plot style plot in color? Black seems to make a lot more sense. Almost everyone in Architecture uses black prints most frequently so that should be the default. And you can't adjust Normal to all black. So what was AutoDesk's reasoning?
View 9 Replies
View Related
Aug 9, 2010
How does one convert an stb file to ctb. I have tried using the CONVERTPSTYLES command to no avail. After selecting the stb for conversion, i am getting an error message stating that the stb does not contain a color mapping table and cannot be used to convert drawings.
View 9 Replies
View Related
Aug 29, 2013
I am a Mac user and new to AutoCAD. I am enrolled in a CAD class this semester and the instructor for my session is requiring Windows. Supposedly this is because AutoCAD for Mac does not allow for proper printing on their plot style setting.
I understand that I can install Bootcamp and Windows on my computer, but I'd really like to avoid that if I can. If I were to do my work on my Mac and then digitally transfer my files to a PC for printing purposes, would my files become corrupted or compromised in any way?
View 2 Replies
View Related
Nov 16, 2011
how I set up my plot style manager to print color and maybe explain why it isn't printing color now?
View 3 Replies
View Related
May 21, 2013
I have one drawing per file at model tab. When I need to plot a multiple page file, I use:
Print > Batch Plot.
The problem is that I have to set plot configurations ( plot style table, plot area, paper size, etc) in each file before use Batch Plot.
Now I received 722 files with a wrong Plot Style Table. For this time I change the associated *.ctb file at Plot Style folder, but I will need to associate the right *.ctb to each drawing. It's also common to have to change other properties.
View 1 Replies
View Related
Jan 3, 2014
I am using a custom plot to pdf routine(Autocad 2012 x64); everything works ok, I can assign different plot styles but for some reason I cannot assign the "none" after I used a different ctb file. A snippet is bellow:
BlockTableRecord btr = (BlockTableRecord)tr.GetObject(spaceId, OpenMode.ForRead);
Layout lo = (Layout)tr.GetObject(btr.LayoutId, OpenMode.ForRead);
// We need a PlotInfo object linked to the layout
[Code]....
When trying to assign the "none", the code fails. I don't know what I am missing (if I am not wrong it used to work with Autocad 2010?)
View 8 Replies
View Related
Nov 9, 2011
how to convert a ctb plot style to a stb plot style?
View 2 Replies
View Related
Feb 15, 2012
Trying to print a DWG to a PDF.
However, my CTB plot style is missing.
The list of STB plot styles are available.
View 3 Replies
View Related
Jul 7, 2011
Here's what I'm trying to do.
1. Create a layer that is Color 250.
2. Create a Plot Style that can have the true color 255,255,255 set.
It seems I can only use the 255 default AutoCAD index color palette. I would like to have some solid filled hatches to be the physical color 250 in the drawing, but I want these objects on a layer that plots the true color 255,255,255. The reason, is because I want to use these solid filled hatches as a mask. I'm not going to use that as an alternative.
I just don't want these solid filled hatches to be white. I can live with it, and it's working fantastic for the use I need but am just trying to see if this option is available.
View 4 Replies
View Related
Apr 18, 2012
AutoCAD MEP2013
Tried to print for the first time running MEP2013, and my plot style is missing.
I tried convertpstyle and had no success. Convertpstyle has worked in the past.
View 1 Replies
View Related
Sep 11, 2012
Where else do they keep this setting? I only have found it in Active Layout in extended dada
(entget (vlax-vla-object->ename(vla-get-activelayout (vla-get-activedocument(vlax-get-acad-object)))) '("*"))
The last pice of extended data is:
("PLOTTRANSPARENCY" (1071 . 0))
When i change it to 1
(setq layout(vla-get-activelayout (vla-get-activedocument(vlax-get-acad-object))))
(vla-getXdata layout "PLOTTRANSPARENCY" 'type 'data)
(vlax-safearray-fill data '("PLOTTRANSPARENCY" 1))
(vla-setXdata layout type data)
it stays there (extended data), but the setting in Plot dialog box doesn't change!!! And it still prints no transparency.
It takes to save the drawing and reopen it again to see the change.
The command -PLOT does not have this setting as well, so my options back to VBA or Lisp, but HOW?
View 9 Replies
View Related
Feb 6, 2012
I have a problem to plot thin lines and dots when Plot Transparency option is On in the Plot dialog box.
The lineweight is a half of the original. I think i have tried everything.
It shows correctly in the Plot Preview but when printed there are no dotted hatches and lines are much thinner.
View 9 Replies
View Related
Aug 21, 2012
Can users with a 64 bit computer share pc3's and pmp's with 32 bit users without adverse effects?
View 1 Replies
View Related
Aug 29, 2011
When I publish a drawing as a multipage DWFx (or PDF for that matter) with "Include Layer Information" selected, the Plot Stamp (Simple Date/Time and Text) comes out but on different layers on different layouts.
Example:
First Layout : Plotstamp resides on Layer 0
Second Layout: Plotstamp resides on Layer 3P
Third Layout: EQPT-VC
etc
Some general information:
Autodesk AutoCAD 2011 64bit
Autodesk DesignReview - 2012
Adobe Acrobat X Professional
Layer 0 Is thawed/plotable and on in all layouts, viewports all layers, viewports. It has at least one entity per layout
Is there anyway to rectify this and still use the built-in Plot Stamp?
View 2 Replies
View Related
Jan 17, 2012
So the firm I work at has AutoCAD 2000 and 2007. 2000 is installed on 5 out of the 7 computers, and 2007 installed on 6 of the 7 computers. 2 of the computers running just ACAD 2007 are Windows Vista, while all the other computers are Windows XP. We have an OCE TDS320 CAD Printer, an HP Wide Format Printer and a Panasonic 330 Copier/Fax/Printer. Our Problem is that When you try to plot an ACAD2007 drawing it will only plot it in color. This problem did not exist before 1/12/12.
When I select the Plot Style to print I select "monochrome.stb" which has always worked, now all of a sudden it doesnt. The only way i have found to fix this problem is to change my drawing to layer "0" which is white, so when it tries to print in color it will print black. Another Guy in the firm i work at has ACAD2007 on his computer running XP, he also has 2000 running on the same computer. When he tries to plot on ACAD2007 the same thing happens, so it is not isolated to my computer.
There is a difference though between his Plot Styles on his computer and the ones on mine. His end with .ctb, which works. It only doesnt work when he tries to print a drawing i made off of my computer. Because of this we copied his Plot Style folder for AutoCAD 2007 and installed it into the folder with all of my plot styles on my computer, replacing the ".stb" with ".ctb" That did not work at all. The last thing we tried was to copy over a file that plotted correctly, delete the drawing and draw what we needed, This also did not work. So basically we are thinking that ACAD2007 is not reading the Plot Styles correctly, or the Plot Styles are wrong or currupt.
View 1 Replies
View Related
Jan 17, 2013
I have several objects on various layers in model space and they are exposed through a viewport in a paperspace layout. I also have a corporate CTB plot style.
Here is my problem: If i plot the objects from model space, they all plot with the correct lineweights as defined in our corporate CTB, but when i plot them from the paperspace layout, some but not all objects plot with a heavier lineweight than what is defined in the CTB.
I thought the CTB was supposed to override any settings applied to individual objects, but more importantly, why the different results, on the same objects, depending upon the space from which they're plotted?
View 3 Replies
View Related
Aug 13, 2012
I have found that when I Publish, the drawing comes out shifted about 1/8" down and 1/8" left as compared to when I use Plot. Which of course is just enough to cut off the sheet border which is 1/2" from the paper edge. I am using the same Page Setup for both Publish and Plot, same drawing.
This is to an Oce TDS600, and it only happens with 15x21 paper size. All paper sizes are set to 0" border. Probably an Oce issue, but have any of you seen this before?
View 1 Replies
View Related
Aug 8, 2012
I recently upgraded from 2010 to 2012 and when trying to plot, using the very same page setups as before the upgrade, the quality (or resolution) of the plot is very poor and pixelated. I am using very high resolution aerial imagery. The output is not at all high resolution (totally pixelated, not presentable as professional). It seems like AutoCAD is reducing the image quality now. Is this a system variable that can be adjusted?
View 1 Replies
View Related
Nov 29, 2012
I have a stationing line. I've used the block PTTICL to make ticks. The ticks display perfectly. I'll run through a plot preview and the ticks show on the plot preview. I push plot go to the printer and the ticks are not plotted.
I've checked the layer. They are on a layer that should print.
I've checked the block. The block is created on a layer that should print.
I've run through a number of options regarding the alignment label properties and found "display" to be equal to "true."
Everything else plots just fine. Only the station label ticks refuse to plot. My project is fairly short so the work around was to put a poly line right on top of the tick mark.
AutoCAD Civil 3D 2013.
View 5 Replies
View Related
Sep 30, 2013
I have just switched over to 2014 and i cannot for the life of me get my batch plot to plot PDF's to a single file! Instead, it's printing all 37 layouts separate. I tried switching between multi-file & single file in the publish options, but nothing!
i know that it took me a while to perfect my settings the last time i set up a new version, but i am struggling to work it out now.
View 1 Replies
View Related
Aug 30, 2012
I am aware of the plot stamp available in the Plot Dialog box, however, we are looking at ways to imbed this info in the dwg. I currently have the WD_TB with an attribute for FULLFILENAME, an attribute for PLOT DATE, and an attribute for PLOT TIME12. So I get the information on the dwg. I would like to be able to run all these attributes as a string. I have tried FULLFILENAME|PLOT DATE|PLOT TIME12 with spaces, commas, ( ), " ", etc. and I do not know the proper syntax to get this to work. I have also tried (getenv "FULLFILENAME") or the getvar, in the title descriptions box.
View 1 Replies
View Related
Sep 1, 2011
AutoCAD Architecture 2011
Windows 7 x64
8GB RAM
Created new PC3 for KIP 3100 plotter using its AutoCAD Heidi driver for Win7x64. Upon plot preview the following error occurs.
This causes a crash report which has been submitted to Autodesk. The response was to install service pack 2. Error still occurs after installing the service pack.
Using the non-AutoCAD driver works.
View 1 Replies
View Related
Feb 21, 2005
I've plotted many drawings and I've always just taken it for granted that the plot style table that I typically use, monochrome.ctb, would be there to select in the plotting window. Usually, the drawings from my customer, have this option available to me in the plot style table when I get ready to plot. However, a few have come to me recently in which it was not available. Instead, the drawing had a monochrome.stb which does not plot out with a true monochrome appearance. I do not want this. I do not know how to get the monochrome.ctb style from my other drawings to work in my new drawings that only have monochrome.stb. I know very little about the different plot styles and how to modify them or import/export them. From what I gather by browsing this site is that you might be able to save plot styles to a folder in your computer and then import them to your drawing. Is this true? How I can get this monochrome.ctb to work in my drawings that only have monochrome.stb??
View 9 Replies
View Related
Aug 5, 2013
How do you download the new plot sytles from your page set-up? Where to get it from your autocad file samples or set ups?
View 2 Replies
View Related
Jan 26, 2012
new at autocad 2012 (previous CAD07 user)im having trouble setting up my page, never had a problem with this before..... i need an A4 scaled drawing in paper space.
my current setup....
paper size: A4
plot area: extents, ticked centre the plot
scale: 1:1
the result: titleblock cut off on left and right sides
its only when i need A4 size (red margins!) A3, A2 etc are fine....i dont know what else is needed? I installed CAD12 only a few days ago and im the first and only AutoCAD user at my work. Im not sure if there's some intial setup settings that are required.
View 5 Replies
View Related
May 9, 2013
We have 2005LT for kitchen design. I need to recover or find a pen assignment. The "Plot Syle Table (pen assignments) window is showing "peacock.ctb (missing)." Is there a way to recover this setting?
View 4 Replies
View Related
Oct 3, 2013
Essentially, I've got a bunch of extruded polylines - so, some 3-d shapes - that I'm viewing in a new layout/'viewport' (?), which is set to SW Isometric view in '2D wireframe' viewing style. I've got my lines in different colors, mapped to be all black but different line widths in a custom Plot Style .ctb file.
So, when I change the 'page setup' to "display plot style", everything seems fine. All the lines go black in the viewport, and it seems as though I've configured everything correctly. When I preview an export to .pdf, however - or actually export it - this is lost. The export comes out in color.
I've done exporting using both EXPORTPDF, and PLOT, in both cases making absolutely certain that the .ctb file is being linked correctly (with EXPORTPDF, I've done it both using the 'current' page settings, and also 'override'), and with the PLOT, using the DWG to PDF converter,
I've looked through EXPORTSETTINGS, EXPORT...
On the same computer, with another earlier, simpler file, I have no issues accomplishing what I want.
For additional information/to make things more annoying for me, at this stage, the previous file which DID work seemed to conserve layer information, and allowed me to edit individual lines later, if necessary... This colored "I don't care about your plot styles I'm not going B/W" file seems to just be a flat image.
I've compared the two files in two tabs extensively, and can't seem to find ANY other difference, in any of the settings...
PC running Windows 8, Autocad 2014, Adobe Reader XI. Tried both the DWG to PDF and Adobe PDF plugins to export to PDF...
View 7 Replies
View Related
Jul 18, 2013
I need to create a new plot style from scratch.I am working for a company that is just starting up, and need a color dependent plot style (.ctb).Where is a good place to start, and what do I need to keep in mind while creating said plot style? How do you have yours set up?
View 2 Replies
View Related
Jul 27, 2006
I just completed a new drawing from scratch and I'm ready to plot. Problem is that the plot styles are missing. I tried opening another drawing to see if the plot style would show up, and it did. For some reason this new drawing is missing most of the plot styles.
Is there a way to load them into this new drawing? Also, is there a way to avoid having to load them everytime I create a new drawing?
View 6 Replies
View Related
