So my co-worker says everytime he opens up a drawing, all of his osnaps are on. He turns them off and reopens the drawing, and they are back on. Before I go down stairs to see what the problem is.
View 9 RepliesWhere the hell did my Dynamic Input Tooltip go? How do I turn it back on?
View 1 Replies View Relatedi have a line art drawing and have expanded the strokes to paths. now i'd need to turn part of the paths back to strokes and can't find an (easy) way to do it.
inserted is an example of the situation. instead of closed path i'd like the form to be a stroke.
every now and then i keep setting up my Osnaps. is there a permanent setting on Osnaps? or did i mess something in my CAD system?
View 6 Replies View RelatedHow do I turn my "define brush" option back on?
For some reason it turned off and erased all my previous watermarks tha I had made for my photos.
I need this option back in order for me to continue my work.
I'm not new to lightroom. In every photo I go in to edit with the tools (any of them/all of them) my cursor only appears as the tool along the edge of my workspace. Once I move the cursor into about a half inch (on the computer screen) into the workspace my cursor becomes an arrow again, not allowing me to edit except for on the edges. I mean, I can drag the portion of the picture into the area in the workspace that allows my cursor to function as a tool, but this is not easy nor is it preferable in any way.
View 1 Replies View Relatedhave finished loading 2007 onto them.Now, back with 2006 we could set osnaps to the function keys (e.g. F2 to snap to END). I have been told that you can't do this with 2007.
View 9 Replies View RelatedI am using education version of Autocad 2012 and have only around 2 gig of RAM. Whilst drawing , mainly in 3d my osnaps do not seem to work properly. In a lot of cases it is only the "nearest" snap that works. Sometimes I get no snaps when I think there should be plus I get a bunch of tiny green crosses around where I want to snap. Could my lack of RAM be causing this ?
View 4 Replies View RelatedURL....Constantly in 12 and 09 I have had issues snapping to endpoints since the changes to osnaps in ACad itself. It doesn't seem the ramifications were followed thru to ACA.
They seem to have addressed some issues in 12 but not all and often it dails completely.As osnaps is a basic functionality I think Adesk needs to get this working properly and as a fix for 10,11,12 and 13.
I'm facing a very weird problem with circle and interception osnaps. Maybe I'm wrong, but I've a space between the osnaps interception and the the circle line (pointer) when I'm trying to move it to the bottom or top line.
The problem doesn't occur with line. The osnap will go directly to the interception, but with the circle, I just can't understand... It's currently messing my drawing up, as I'm trying to move the circle tan point to another interception.
Here is the screenshots with only interception snap checked (working in milimeters if it does matter):
Well, seems it does occurs with all the snaps too, tested it with "nearest" too, and look how descaled it is:
I had some problems with Osnaps that thery are imprecise!
When draw lines in 2d and zoom in to draw things are more detail, then the osnaps show double, and even worse if I import a block and the block places in a different place than the osnap shows.
What would cause Osnaps to stop working on 2D section linework?
View 1 Replies View Relatedi am trying to reduce the sensitivity of osnaps by changing the aperture. However, no matter how big or small I make the setting, my snaps are still way too sensitive. I can move my crosshairs across a whole line that's 48 inches long and I can only snap to an endpoint or midpoint (I want to just snap somewhere along the line). I have tuned on the option that shows the aperture, and it's definitely changing astetically, however the behavior of osnaps have not changed
View 2 Replies View RelatedC3D 2012'
I accidentally closed the ribbon or the tools.. whatever you want to call it that were in the red rectangle in the picture.. How do I get it back to normal?
I am new to corridors and am having some trouble with this. I have an assembly that has a paved roadway, 2' curb and gutter and a sidewalk. Along the road the curb varies to allow for on street parking. I have the front and back of sidewalk attached to an alignment, so it is exactly where it needs to be. I have an alignment that my EOP follows as well, and that seems to be ok. The problem is the back fo curb in the corridor. Instead of being 2' offset from the EOP, it is shifted 2' perpendicular to the baseline. Please take a look at the attached picture.
I think I can get it done by making each parking "bump out" it's own region using the EOP alignment, but that will take a lot more time and make my file a whole lot bigger. Being a corridor rookie, I am hoping I am just missing something.
I'm using Civil 3D 2013.
I have used stringer connect in the past and it seemed that my traverse shots (which went to four decimal places 0.0000) that were in my raw file were converted to a fbk file and it held the decimal places. Now when I use it, the program rounds my shots to three decimal places (0.000) which changes the locations just slightly. I don't think I changed any settings deliberately. How can I get my four decimal places back?
View 3 Replies View RelatedI am now using Civil 3D 2013. In previous versions, SCALELISTEDIT, then Reset would give me Civil Scales. Now when I use the same command and reset, then choose Imperial Scales, it resets scales to only Architectural. I tried to make a change using_AECDWGSCALESETUP. The dwg units are already in Feet and the Type is set to decimal. How do I get back to engineering scales?
View 3 Replies View RelatedI recently got a new computer that has Windows 7 64-bit on it. I immediately installed Civil 3d 2012 on it and it worked great. Some of our projects are in 2012 but some of them are still in 2011. So I exported the license from my old machine and tried to install Civil 3d 2011 on my new machine. I noticed that a couple SQL programs did not install because there was already a newer version on my machine. When it finished installing a tried to open it up and it acts like it is going to start ( I get the pretty Civil 3d Picture in the middle of my screen and the window pops up) but as soon at it starts it just disappears and goes right back to my desktop.
I though that maybe the problem was that I installed 2012 first so I completely uninstalled both of them and tried to reinstall just 2011 and I still have the same problem. I also tried disabling my Virus/Spyware protection software and reinstalling it. Same results.
Not sure how to word this question correctly. I saw a co-worker do a 'temp-save' on a drawing, mess around with drawing, and then come back to the spot in drawing where he had 'saved' to essetially deleting all the stuff he had done. I cannot remeber what he used to mark this and then be able to come back, but if he liked the edits he had made, he could just keep drawing.
View 2 Replies View RelatedI am trying to turn off some markers shown below in magenta (the circles). The problem is, I've gone through the Alignment Styles and can't seem to locate the layer that these markers are actually part of.
View 4 Replies View RelatedI'm just looking for some basic information about geo-markers and am having a hard time finding anything. What exactly is the geo-marker, and what is it used for? Is it important to have referenced? I know how to set the coordinates and to turn the visibility off. I'm just wanting info about what the geo-marker is, and it's uses.
View 1 Replies View Relatedhow do I turn off the new "stretch" vertices?
I am finding that I click to select a line, and start typing commands, only to find out they aren't registering b/c I have selected that un-needed extra vertex in the middle of every pline segment.
I have checked the Options, and cannot find how to turn those off. They were not in 2008.
Civil 3D 2011
How to turn off the yellow flags. See the attachment photo. I click on them and the whole assembly is lit.
View 4 Replies View RelatedI would like to make a seamless mosaic of aerials, however I can't figure out how to turn off the border on each image. (The border which changes color with whatever layer the image is on)
View 4 Replies View RelatedSo I have an existing surface set up, and want to show the contours and everything else, but not the outside border. I went to the style settings and set the display exterior and interior borders to "false" and also turned off the "visible" light under the display tab for the border. I even turned off the layer that the border is on (C-TINN-BNDY). But my border still shows.
View 4 Replies View RelatedShortkey to turn off the warning and pop up messages? for instance, "one object has been changed to a frozen or turned off layer".
View 5 Replies View RelatedIs there a way to revert back to the original colors of an xref besides having to reattach the xref and purging the DWG.
I always change the colors of the projects Existing site/utilty XREF to color 252 to shade it back to have the proposed show up darker. But I try to select all layers to change the colors back to what they were before and the box to set color by layer is not available.
Every time I create a new layer, name it, asign a color, linetype, etc...it defaults back to the original color, making me set it twice. Am I missing a setting somewhere?
View 2 Replies View RelatedHow can I screen back an aerial that is being x-referenced into a drawing?
View 5 Replies View RelatedMy alignments have been created not under Sites and I am copying them to different Sites as needed. I am copying appropriate profiles along with them - an existing from surface and 1 proposed.
1. Should I copy the Profile Views? - will this create a copy of the profile view directly over the original profile view?
What are the benefits / disadvantages of copying / not copying the profile view along with the profile?
More importantly,
2. How do I turn OFF-ON copies of the alignments and annotation in my Plan View?
If I right-click alignment properties in a Site and set the Object Style to NO DISPLAY - this turns off the alignment, but not the annotation.
If I right-click on the alignment labels, Edit Alignment Labels - I am looking at a complex dialog box with lots of drop downs - a bit lost in here. What about a 1-click setting to NO DISPLAY the layers like I can find for the alignment itself?
Do I need to create/copy a bunch of new Styles? Not sure exactly where to go or start.
Is there any way to turn off Layout Tools Contextual Tab in 2013? I tried the same options that worked for 2013, but it didn't work on 2013.
View 1 Replies View Related