AutoCAD Civil 3D :: Mark Spot In Drawing And Come Back?

Jan 9, 2014

Not sure how to word this question correctly.  I saw a co-worker do a 'temp-save' on a drawing, mess around with drawing, and then come back to the spot in drawing where he had 'saved' to essetially deleting all the stuff he had done.  I cannot remeber what he used to mark this and then be able to come back, but if he liked the edits he had made, he could just keep drawing.

View 2 Replies


ADVERTISEMENT

AutoCAD Civil 3D :: Make Sure Annotated Surface Labels Spot Elevations From 3D Design Drawing

Dec 19, 2013

How can I make sure the annotated surface labels spot elevations from my 3d design drawing which is being xrefed into a new Precise Grading Breakout Sheet plots screened?

The Label Style which I created for the annotated surface label spot elevations has all its properties set to be ByLayer for example its color and lineweight.  The Layer I assigned the Label Style was assigned to a layer with a color and plot style that should plot any object screened.  Color 8 and Plot Style Screened.

What other steps am I missing to assure myself that this Label Style will plot screened in my new Precise Grading Breakout Sheet?

I also made sure that the xref drawing in which this Surface spot elevation has the correct colors and lineweights and Plot Styles in my new Precise Grading Breakout Sheet.

View 5 Replies View Related

Lightroom :: 5.2 Spot Removal Sync Missing The Mark?

Oct 8, 2013

I had this issue in LR4 also, and now in LR5 too. I am trying to sync a bracket of interiors shot manual focused on tripod, mirror locked up and cable released. It's very frustrating to say the least when the shutter speed is the ONLY thing changing between frames, but yet it puts the pins down in other places than when your source image has them.

View 3 Replies View Related

AutoCAD Civil 3D :: Screen Back Aerial That Is Being X-referenced Into Drawing?

Apr 8, 2012

How can I screen back an aerial that is being x-referenced into a drawing? 

View 5 Replies View Related

Edge Animate CC :: How To Cut The Timeline Back To The 9 Second Mark

May 22, 2013

I have made a 9-second animation but, somewhere along the line, the timeline has  acquired another 15 seconds of blank space.  Is there any way to cut the timeline back to the 9-second mark?

View 1 Replies View Related

AutoCAD Civil 3D :: Click In Drawing Area Required After Picking Object To Get Cross Hairs Back

May 23, 2012

When I click on a civil 3d object the contextual ribbon will light up (which is fine) but instead of my cross hairs comming back in the drawing window I get the pointer that would be used to select an item in the ribbon (in the drawing area) and I have to click in the drawing area to get my cross hairs back or to grip edit the object or to delete the object.

Is there a option/setting I need to change to be able to get me cross hairs back after selecting a civil 3d object?

Just move to Civil 3d 2012, this worked just fine in '11...

View 4 Replies View Related

Lightroom :: 4.3 - Canon 5D Mark III Back Screen Dead After Tethered Capture

Apr 12, 2013

I was successfully shooting tethered using Lightroom 4.3 (PC laptop with Windows 7) and my Canon 5D Mark III, however when I disconnected the cable I was no longer able to see anything on the back of the camera, no image playback, no menu, no live view, nothing.  How do I recover the functionality of the camera's back screen.  I tried removing the battery for a while, replacing the battery, taking out the memory card.  Don't know how to "reset" the camera.  Note the top display on the camera and the view finder display work fine, I can change settings with my dials.  Was working in Manual Exposure mode, and also tried Aperture Priority.  If I reconnect to the laptop I can still work in tethered mode, but after disconnecting the camera back is still dead.
 
Was I somehow supposed to disconnect the camera from tethered capture before disconnecting the cable? 

View 5 Replies View Related

AutoCAD Map 3D :: Find Lines That Overlap One Another In A Drawing And Mark Them?

Jul 31, 2012

I need to find lines that overlap one another in a drawing and mark them, not delete them.  I am running AutpCAD Map 3D 2012.

View 3 Replies View Related

AutoCAD .NET :: Parse A Drawing To Bring Back Text From Drawing

May 9, 2013

I'm taking over the development of some Autodesk addins that are used to parse a drawing to bring back text from the drawing, namely title block and bill of materials information.  I have another process that runs and reads the meta data for the drawing itself that gets run from Vault before checking in the drawing.  I need to know if I can combine these two processes such that I can parse the drawing outside of AutoCad.  Is this possible?

View 3 Replies View Related

AutoCad :: Drawing Show Up As Small Triangles With Exclamation Mark Inside?

Jun 27, 2012

I am having an issue with an xref in one of my drawings. There are AEC_WALL objects in the xref file but in my drawing they show up as small triangles with an exclamation mark inside.

View 2 Replies View Related

AutoCad :: Drawing Points From Flattened Spot Levels

Mar 8, 2012

I have a survey drawing and would like to create a surface from spot levels. However, the drawing has been flattened, and the spot levels are just text.

Is there any way that the Z value given in the level can be grabbed, and used to draw a point at that location? I have about 2000 spot levels so I'm not doing it manually...!

View 9 Replies View Related

AutoCAD Civil 3D :: Get Feet Mark On Dimension

May 9, 2012

I am trying to get the feet mark (') on the dimension, right now I have 66.71 and I want 66.71'.

View 5 Replies View Related

AutoCAD Civil 3D :: Measuring From Alignment Tick Mark?

Nov 7, 2013

How come when you try and check a distance on an alignment, and say I try and click on one of the tick marks it will not snap to the intersection of the tick mark....it like jumps off like half a foot and will not give you an accurate measurement?

View 2 Replies View Related

AutoCAD Civil 3D :: Show Mark In Point Zoom

Oct 29, 2013

I have included a button with the same function that "zoomSta" from dotsoft.It is at the end of the list (zoomsta): URL...However,I would like to show a temporal cross mark in point of zoom like command "zoomsta" does.

How can I show that mark and that mark disappears  when I do zoom or regen?

View 2 Replies View Related

AutoCAD Civil 3D :: Changing E-max Value Introduces Exclamation Mark

Aug 3, 2013

Changing e-max value introduces an “exclamation mark”,

 I wanted to select an emax of 6% but sounds that the horizontal curve is flagged by “exclamation mark” (attached). What might be the issue here?

View 4 Replies View Related

AutoCad :: Annotative Block With Dynamic Properties - Add Spot Elevations To Drawing

Jan 8, 2014

I created the attached block to add spot elevations to a drawing. The block has attributes allowing elevations to be manually typed in, but also includes many dynamic features for rotation, lengthening, mirroring, etc. The block was created as an annotative block.

The block and all of its features work perfect as long as the dynamic features (rotation, etc) are not used after additional annotative scales are added. I often times have a drawing set at 1:10 or 1:20 scale and need to do an enlarged detail at 1:5.

What I would like to do is have this block set at 1:10 scale and 1:5 scale and manually rotate it (ideally using the dynamic features) at different angles for each scale. Is this possible and if so, why is it not working with this block? This works flawlessly when using annotative multileaders, so why shouldn't it work with blocks or is this just too labor intensive for the software?

I have also tried attsync, etc. and often times when rotating at different annotative scales, the text attributes go "bonkers" for the opposing scale when applying attsync.

View 0 Replies View Related

AutoCAD Civil 3D :: Point Description​ Gets Truncated After Mark From Field Data

Aug 23, 2013

I am trying to get my points to displey the " mark from our descriptions. The description keys are set to $* and I have tried changing the Label Style from full description to raw description. I cannot get any information after the " mark from our field data. LDD used to put it in, but civil 3D truncates the information. I know I can do a find and replace in the .csv file, but would rather not have to continually edit the .csv file. Where the setting in civil 3D is to allow this to happen? I have even messed with the Point File Formats to no avail.

View 2 Replies View Related

AutoCAD Civil 3D :: Pipe Profile Station Label Shows Question Mark

Jun 21, 2012

how to update the information? I revised the pipe alignment but the profile did not update the station. WHat steps do I need to perform?

View 1 Replies View Related

AutoCad :: Put Rotated Drawing Back To Level?

Mar 2, 2012

How do I put a rotated drawing back to level, I would like to do it using 2 pick points on a line I want to be horizontal

View 9 Replies View Related

AutoCAD Civil 3D :: Spot Elevation Text Style

May 1, 2013

How can I change the text style of spot elevation labels. I need to have my existing spot el. show as a different text tyle to the proposed spot el. I have attached a picture.

Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3

View 2 Replies View Related

AutoCAD Civil 3D :: Spot Levels At Decimal Point

Apr 29, 2013

I've got a cut./fill plan with red and green surface spot level labels (derived via a grid) but wonder if there is a way to make the decimal point coincident with the with "X" marker.

View 2 Replies View Related

AutoCAD Civil 3D :: Copy Surface Spot Elevations

Sep 6, 2012

In 2012 I can no long grip a spot elevation RC copy. It just ignores it an moves it to the new location.

Is there a setting I might have to re-set?

View 4 Replies View Related

AutoCAD Civil 3D :: Spot Elevation For Surface To Plot Screened

Dec 18, 2013

xrefing a drawing that has annotated surface labels spot elevations into a Precise Grading Breakout Sheet, but making sure those labels plot screened.  How do I make sure I can plot it screened?  I have set the label styles By Layer and the text within that style is set By Layer and the Layer I created for the styles is set to plotstyle screened and color 8, I also made sure that the Precise Grading breakout sheet has the xref layers applicable to those surface labels set to screened plotstyle and color 8. 

View 1 Replies View Related

AutoCAD Civil 3D :: Create Volume Calculations From Spot Heights

Feb 13, 2012

What I would like to do is create volume calculations from spot heights. All i have is 4 rectangles with a 10m interval, nine elevations, no points or anything else.

What steps do i have to go through to make this possible?

View 8 Replies View Related

AutoCad :: How To Get Default Dimensions Style STANDARD Back Into A Drawing

Nov 26, 2013

How to get the default dimensions style "STANDARD" back into a drawing after it has been purged? I accidentally purged it and now I want it back. .

View 7 Replies View Related

AutoCAD Civil 3D :: Alignment Station Offset Label Blind Spot

Mar 26, 2013

I am labeling station and offsets from my alignment for curb returns and such and for some reason if the offset point is directly perpendicular from an alignment PC or PT the label can't find the alignment information. It's like there is a blind spot.

View 4 Replies View Related

AutoCAD Civil 3D :: Surface Spot Elevation Label With Dynamic Location

May 8, 2013

I know that I can add coordinates for such elevation using text component editor but I have to add the letter "N" for North or "E" for East to identify the location of the elevation (North/East/South/West). But, is there a way to make a label style that reads up the location of an elevation automatically?

I've attached pictures below for this issue.

C3D 2012, C3D 2013
Windows 7 Professional 64-bit
Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz

View 2 Replies View Related

AutoCAD Civil 3D :: Spot Elevations Disappear When Saving Down From 2013 To 2007

Oct 19, 2012

I just completed my first topo using Civil3D 2013 (yay!) and now I want to send it to a client. However, when I save it as an ACAD 2007 file and go to open it using ACAD 2007 the spot elevations and all text and symbols associated with them disappear. I can't imagine that you have to have Civil3D to view a Civil3D file. Is there something I can do here?

I did not create a survey database with these points, just imported the .txt file from the field.

View 1 Replies View Related

AutoCAD Civil 3D :: 2011 - Creating Existing Curb / Gutter Spot Grade

Mar 21, 2012

creating a existing surface single Curb/Gutter spot elevation label using two existing surface elevation points and not cogo points.   I am a surveyor, and I want to be able to just click on both points one at a time (top of curb/gutter) to place the elevation label.  

View 3 Replies View Related

AutoCAD Dynamic Blocks :: Send Info From Excel Spreadsheet Back And Forth Between A Drawing

Jan 12, 2012

why I can't export the "Distance 1" attribute out of thsi drawing using the ATTOUT command.  I need to build a series of constrained drawings using Dynamic blocks so I can send info from an Excel spreadsheet back and forth bewteen a drawing.  I think I'll have to buy a 3rd party utility for that but for now, how to simply get the info out of ACAD and into Excel thsat would be a great start.  

View 2 Replies View Related

AutoCAD 2013 :: Convert Drawing Using Asian Bigfont SHX Font Back To English

Aug 15, 2013

Is there any way to convert a drawing using the Asian Bigfont.shx font back to English? The font can be changed, but the characters remain un-readable. Mostly ? and letters and symbols but no words. It seems like it needs to be translated, and not just converted, but it is not displayed in any form that could be translated.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved