If I have an image that's too big to fit on the printer page, how do I set my printer settings to adjust the image to the right size (i.e. without scaling the image manually)?
View 2 Replies
I am having trouble getting my Civil3d line labels to adjust with the annotative scale.
View 4 Replies View RelatedI created a image (with blank background) with dimensions 640 x 480 (its my default working image).
I have copied photograph with dimensions 7300 x 4200 and pasted as new layer on the image (640 x 480). Obviously, the pasted photograph is bigger and it couldn't be showed totally. I am adjusting the size of the photograph manually, dragging and dropping its corner lots of time.
I tried to use "image => resize" / "image => canvas size". But it just act on my default image (640 x 480), not the photograph (even when its layer is selected).
So, is there any way of resize the photograph automatically to fit in the default image (640 x 480)?
When I use the marquee tool to draw a shape - circle/square etc I sometimes don't get the size exactly to my requirements. is there a way to fine tune the produced size? I'm assuming that there is some combination of keys that will allow me to make fine adjustments up or down to the size of the shape. How to do this without closing down and starting again and again until I get what I require?
View 2 Replies View RelatedI am having diffuculties with my "Filters Gallery" window. Whenever it comes up, it cuts off some parts of the tools in the Filters Gallery. For example, if I wanted to give my image the "Plastic Wrap" filter, on the right side I only see half of the Highlight Strength, Detail and Smoothness adjustment bars, I can't see the little boxes where you enter numbers for the adjustment bars and only half of the Ok and Cancel buttons on the top of the window. When I try to adjust the window size by using the little black arrows that come up when you put your cursor on the edges of the window, it will only let me make the window longer, not wider. How can I make everything visible in my Filters Gallery window?
View 2 Replies View RelatedAfter adjusting white balance in ACR - images are opening in PS at a different size? how to prevent it?
Negatives are scanned at 3200dpi, and 24bit depth. This is the metadata from Bridge.
Default settings in Camera Raw After opening in Photoshop.
how I could keep the same radius of a rounded rectangle, when I'm adjusting the size of the rectangle. if you treat it like any other object, your radius will grow/decrease along with your rectangle.
View 2 Replies View RelatedWhere do I go to adjust the size of my nodes? My dots are displaying as very large circles aith a line through the center.
View 3 Replies View RelatedThe aperture size cannot be modified using the sider under options. Workaround seems to be to use the system variable “pickbox”. Occasionally it seems to also display as a rectangle instead of a square, obvious when variable is set below 10 (however, this seems to be one of those intermittent problems / might be a stand-alone graphics problem).
I've got SP1 installed.
URL....On that image, I want to adjust the tickness of the thin white line.There is only 1 contour step.
View 2 Replies View RelatedHow do I get the handles to appear on the actual image for adjusting a colour and transparency gradient?
I know how to adjust a gradient in the gradient editor, but I need to adjust the position of the colours and the transparency bands on the actual image. what I clicked in the tools pallette to get the handles to appear.
discovered the pleasures of Edit>Convert to Profile command. When I convert to a new profile (I have belatedly discovered paper profiles) from adobe RGB to Hahnelmule Photorag to be precise there is a loss of saturation I am having trouble recovering. I will avoid this problem by starting with the correct profile however I have a lot of work in the wrong profile. To keep things simple I have flattened the image.
View 12 Replies View RelatedIf I go on adjusting a psd-file which has been flattened, will the file´s image quality go worse?
Meaning that I´ve had a TIFF-file (made from a RAW-file) that I have adjusted with plenty of layers. After all the adjustments, I´ve made a copy of it, flattened the copied file, cropped it to the wanted size (no interpolation), and made some changes again with cloning tools and gaussian blur.
But after this, I find I still have to make another version of the image with different adjustments of lightness (curves) and colors (color balance, saturation) and I´m pondering if I have to go back to the file with layers, or can I continue with the cropped file and make new adjustment layers on this flattened image. Would be better for the work flow and my nerves...
There is a touchscreen monitor in my car.It allows custom background wallpapers to be loaded via USB.The touchscreen automatically adds what would appear to be about a 25% alpha black layer in FRONT of the image so the touchscreen controls and icons are clearly visible.The problem is, I don't know what values I'm supposed to adjust on my image in order to get it to look the same way it does on my computer screen.Would you adjust the brightness? Contrast?Or is this simply not possible because the ~25% alpha black tint is placed OVER the wallpaper?
View 14 Replies View RelatedI need to know how many pixels. like ?? by ?? to make a page the same size as a printer page ...
View 2 Replies View Relatedhow to adjust an image which is blurred?
View 2 Replies View RelatedHow do you set a paper size in the print module if you do not have a printer installed. I want t use the print module to make custom prints on 8x10 and 11x14 size paper. But I want to print to a JPG to send out to be printed.
View 2 Replies View RelatedWhen i import my RAW files into LR 4 from my Nikon D90 the images appear to have decent color saturation and contrast. Once i actually click on the individual files, it says loading and the image becomes very flat and dull looking (bad contrast, saturation). I turned off the option to auto adjust for camera specs but I am still having the issue. Does this have something to do with the color space? How can I get it to stop auto adjusting my files?
View 9 Replies View RelatedI need to "Programatically", using Visual Studio, set the default printers paper size to either "A4" or "A3".
I have the following code that gets the required paper size ("A4" or "A3") from the registry and checks that the default printer supports "A3". If it does I want to set the paper size to "A3".
Here is my code so far.
Imports Microsoft.Win32
Public Class Form1
Private Sub Form1_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Dim SetPaperSize As String
Dim PrinterPaperSize As String
SetPaperSize = My.Computer.Registry.GetValue("HKEY_CURRENT_USERSoftwareMechTools", "Printer Paper Size", "0")
For Counter = 0 To PrintDialog1.PrinterSettings.PaperSizes.Count
PrinterPaperSize = PrintDialog1.PrinterSettings.PaperSizes.Item(Counter).PaperName
If PrinterPaperSize = SetPaperSize Then
' MsgBox(SetPaperSize) HERE IS WHERE I NEED THE CODE TO SET THE PAPER SIZE
Exit For
End If
Next
End
End Sub
End Class
I have AC 2010 LT. I have added a printer which is actually a driver for a laser cutting machine. I have been able to add the cutom media size of the machine. I cannot get that size to stick with the printer name. Every time I choose that printer I have to reset the media to the custom size.
View 4 Replies View RelatedWhen I am in page setup manager and want to use the "Adobe PDF" plotter device, I can't set a paper size other than the standard one like letter, legal, 11x17 ect. I need to have the "Adope PDF" plotter to print a Arch D size paper but that selection dosent even show up.
I have troubleshooted all the usual supects, of going to properties next to the printer selection bringing me to the plotter configeration page, where in the device and documents tab I then proceed to the custom properties selection, where the adobe document properties page comes up and under the adobe pdf setting tab...I still cant change or find the Arch D 24x36 paper size under the adobe pdf paper size selection tab other than the standard seletions.
I can not find a way to print out a poster 1000 mm x 1500 mm.There is no such function in Xara X9.
how to print out a poster on a color laser printer A4 size?
What I mean is to use a Tiles or something that professional programs have.
I have created the code to print out the pages from a drawing using Ilogic and the Print Manager.However, I cannot get the ilogic code via the Print Manager to change either the orientation OR the paper size to suit the print out.
For example, If I have an A3 drawing i can create the Ilogic code for the Print Manager to select the page size of A3 (kPaperSizeA3) within the code, but when I run the code the printer will ONLY select the Default of A4 paper.
The A3 paper is in a different tray but I cannot get the Print Manager to Select the A3 Paper.The printer we are having this issue with is a HP LaserJet 5200...We are also having the same problem of Printing out 1:1 Scale drawing to an A0 Plotter. I cannot get the Print Manager to change the Output Page Size either.
This is for a HP DesignJet 430...I have just tried to use the iLogic Snippet for Printing, and if you change the page size to suit A3 (kPaperSizeA3), the printer asks for a paper size of 312mm x 210mm.... This was with the HP LaserJet 5200.
how to get the Printer output paper size changed through the Print Manager.
Why do I need to change the paper type/size in Lightroom everytime I want to print aphoto, even during the same session
I set the paper to say 15 * 18 and borderless and select print. The paper size shown in the top left changes back to A4 by itself. Try setting the options again and they remain as selected. Select another photo and try to print 15 * 18 borderless and the paper size changes again.
I have used Gimp a bit, and before that PS quite a bit. I have never had to use the size constraints for sizing a file to fit a large format printer. I will be getting one any day so I would like to be prepared as much as possible. When I was at another shop, the owner used one of the cropping functions to set the finish print size and then she could move the box around to locate the best print area and remainder to be cropped. She was using PS. I would assume I could do it also in Gimp, but have not found a way to do it yet. What am I missing. Even if the printer software will do it on the printer, I would like to be able to show my customer on a PC monitor what they might expect.
View 4 Replies View RelatedI'm trying to adjust a JPG image so that I can imprint it onto a tapered shot glass. So far nothing I've tried has worked, is there anyway to accomplish this in either Corel Draw or Photo Paint? I'm using version X5.
View 1 Replies View RelatedI'm running LT 2014 at Win7 x64 and have a problem with Xerox WF 6604 custom size paper settings.
Simply say when I change custom printer size at the printer's driver settings and confirm all dialogs nothing happend and LT use default settings. No dialog about new or temporary PC3 appear so looks that ACAD doesnt know about change at the printer driver?
This problem isn't continual but, for example, I printed something from the same dwg twice, but when third one change was set the very problem will appear and ACAD doesn't register changes.
I am having problems printing to drawing sizes other then A Size (Letter).
I have scanned through the messages in this Newsgroup and tried everything that I have found, including making sure that I set the properties in a specific order.
No matter what size I specify, the printer spits out the drawing on an A Size piece of paper.
Here is my
Private objApprenticeServerApp As New ApprenticeServerComponent
Private Sub PlotInventorDrawing(strDwgPath As String, strPlotSize As
String, strPlotter As String)
' Open a document.
Dim odoc As ApprenticeServerDocument
[Code] .......
I use an outside service to make prints. How can I save an image in PSE 11 in either TIFF or JPEG format with the color profile for the outside lab's printer?
View 4 Replies View Relatedlatest updates installed correctly... cs5 and cc6 installed on same machine... now the problem... when sending an image to the printer in cc the program crashes.... but it does not crash when the image is sent using cs5 .
View 2 Replies View RelatedCS3 / XP Home. I am trying to print a 7 by 10 in image using my old Canon BJ200 printer. On Page Setup the right margin always default to 2.5 in,despite repeatly input to defferent numbers. I've lowered the image to 300dpi with no effect on print setting.What can I do?
View 4 Replies View Related
