I use an outside service to make prints. How can I save an image in PSE 11 in either TIFF or JPEG format with the color profile for the outside lab's printer?
View 4 Repliessoftproofing. I apply a color profile appropriate to my printer/ink/paper, and then I can see what colours are in/out of gamut, and won't print as I expect. But, when I click Soft Proofing, the image takes on a less saturated look, however if I select SRGB as a profile it looks normal. That is I believe because sRGB is the profile I have been using anyway. What I don't understand is why the whole image changes. I assume there is more to it than just colours in and out of Gamut.
I do so LR4 asks if I want a proof copy, which is fine and I understand why. When I make a proof copy though, all the adjustments are greyed out so I cannot do anything.
Recently, I have needed to convert my CR2 or DNG files to CMYK profile for a printer. It is my understanding that PS Elements (any version) does not support CMYK profiles. I am an avid amateur I think I need to change from Photoshop Elements to CC or PSCS. What would be the most cost effective way to accomplish this goal?
View 2 Replies View RelatedI get a slight difference in color in my prints my when I use LR prifile vs Canon printer managed. The Canon is much truer to what I see on both monitors which, btw, are calibrated. LR throws in a slight magenta cast. Is there a way to correct this?
View 8 Replies View RelatedI am not able to print images in Photoshop cs6 accurately using my Epson r1900 printer. This seems to have become an issue only since installing cs6. The images look dark and murky. I am using osx 10.7
View 1 Replies View RelatedSo My wife and I got two new laptops (Toshiba Qosmio X875) after getting everything installed my wife noticed that all the images she has edited and uploaded (old and new) appear differently than they do in the editor. The color profile is set to RGB as I've read that's where it is supposed to be. She gets the same results when using Lightroom 4. I inserted a side by side screen shot below and you can see a difference where they should be identical.
View 1 Replies View RelatedI tried following action script code to save PDF file with color profile attached:
var saveOps: PDFSaveOptions = new PDFSaveOptions();
saveOps.colorConversionID = ColorConversion.COLORCONVERSIONTODEST;
saveOps.colorDestinationID = ColorDestination.COLORDESTINATIONWORKINGCMYK;
saveOps.colorProfileID = ColorProfile.INCLUDEDESTPROFILE;
doc.saveAs(pdfFile, saveOps);
But got following errors: error an Illustrator error occurred: 1346458189 ('PARM'). What is the correct way to save PDF file with color profile?
I've looked and looked, and even Googled. how to change the default color profile when you start a New image file? In CS5 mine defaults to sRGB (Under the Advanced drop down) but my CS6 is ProPhoto RGB which means I have to change it manually nearly every time I paste an image copied via right click in a web browser.
View 8 Replies View RelatedI have to treat a few images for a newspaper, and I have to apply an specified Color Profile for them.
what's the difference between the commands "Assign Color Profile", "Convert to Color Profile" or doing "Mode>CMYK, and then Assign Profile",
A printer profile working perfectly in CS5 does even not appear in CS6. How do I fix this? (Windows 7 64 bit for CS5 and CS6).
View 10 Replies View RelatedI use this profile in CS5, i tried in CC and the profile is not there.
I tried installing the ICC bundle here [URL] but Uncoated Fogra29 or any Fogra profiles are not selectable or visable when printing in photoshop CC. (although fogra29 is in the bundle). How I can install this profile in CC?
I found Uncoated Fogra29 the best profile to use with my Epson Inkjet Printer. (better than the default Epson Profile)
I'd like to use printer color management in LR4. My printer is not in the list. Where do I get ICC profiles for an HP Photosmart 8250 printer and "HP Advanced" paper?
View 20 Replies View RelatedI'm trying to install the Costco printer profile on Dry Creek Photo's site but it downloads automatically and opens a utility download instead.
View 2 Replies View RelatedI've been trying to reproduce this color blind conditionfor a long time now and I still didn't figure out how I can do this. I've searched for cluts but didn't find any, only this, which has some previews of them, but no any files I can load into Photoshop's Color Lookup adjustment. I've looked into Pixel Bender plugin, but I'm using CC so that doesn't work either... I've also tried it with the Index Color mode, but that really messes up my image as it has a really low color range (256). I've even tried reproducing the same effect with adjustments, channels, etc, but didn't figure it out.
Since there's a way to perfectly color proof images with this condition, I'm guessing this has to be some kind of ICC profile or something similar. Is there a way I can use it as a color profile?
Well, it looks like I edited an image in ProPhoto RGB and now when I save as JPEG I get a color change (always looks warmer, like a change in white balance.)
When I convert to another profile, the color change. Is there anyway to either convert and get my colors back or as to JPEG with the color's I'm getting in photoshop? What is odd is I'll see a nice white background in PS and even in the thumbnail. But if I open it in anything but PS I get color change.
Within Lightroom 5, I set up a print template for a new Canon ix6550 printer and used it for some months. I happily printed around 40 images.
I sold a few prints, and needed to print identical copies. Up until a few weeks ago, all worked fine.
Then, a few weeks ago, I tried to re-print 2 copies of a single image. The first copy printed OK (it looked like the original), I pressed the 'Print' button once more and the second print came out 'trashed' with extreme increases in saturation and contrast plus a decreased exposure.
I tried altering all sorts of things and printing test strips, but could not get a viable print.
I did not save any changes to the template or to the development settings of the images.
A few days later, I tried again. Without changing anything, the first test strip looked OK, so I went on to successfully print two A4 prints, then the third and all subsequent attempts to print resulted in trashed prints as described above.
Since then, I have determined that if I allow the printer to manage the colours, the test strips look fine. I don't know if I would see a difference on the full sized prints.
So I thought maybe the profile is corrupt? So I downloaded the drivers again from Canon and re-installed - no difference.(Although I do not know enough to locate and delete the originals first.)Should I let the printer manage colours? Will it matter?
How to upload a custom printer profile into Lightroom 3?
View 2 Replies View RelatedI am trying to take a handprint such as the one below and change the color of the handprint to say a light pink (or any color) but I want to keep most of the detail of the fine lines that make this handprint unique. The lines could even just come out as white as below. The main thing is to change the overall color while maintaining the fine details. I have been trying to accomplish this for over a week now in Photoshop Elements 11 and I have been unsuccessful as anything I do just totally color fills the image, which does not keep any details of the handprint.
View 15 Replies View RelatedUsing Lightrooms printmodule with this printer is a big problem for me. Using Cannon Print studio Works, but then you loose a lot of great functionallity in LR print module.
It seems that when I make a preset or set up printer with correct ICC profile the canon printer driver automatically resets to its own default.
It looks like a print driver in the background resets everything i do. Very confusing and Canon support points to adobe.
My setup:
Macpro with OSX 10.9.2 (latest version)
Lightroom 5.3 (creative cloud member, always latest version)
Canon Pixma pro-100 (bought new april 2014)
I have looked several places on internett and it looks that there are a lot people having similar problems.
how to print A3 size borderless portriat using Epson R1500W. I've got this printer 2 days ago and still can not figure aout how to do it. I've got few mm blank in either side of lenght wise.
View 4 Replies View RelatedI have the minimum requirements on my system, I have reinstalled (twice) with the proper rebooting afterwards, etc.,
View 1 Replies View RelatedAfter editing I cannot save the photo. I get the message, "file is in use or has been left open". What does this mean?
View 5 Replies View Relatedcan't save an edited raw image as a jpg.
View 1 Replies View Relatedtell me step by step instructions on how to cut an image and leave the background behind, and save just the image with no background??
View 12 Replies View RelatedHow do I save a thumbnail image in the project bin without it disappearing when I close it?
View 6 Replies View RelatedHow to save edited image after making changes, I find no commit button?
View 2 Replies View RelatedI just downloaded a trial and I want to be able to correct and creat text and save as images (for flier or ticket content that I later convert to jpgs).How do I do that on Elements 10?
View 3 Replies View RelatedI have opened a jpeg as Camera Raw (7.3) and adjusted it and wanted to save it as jpeg, but the only option is *.dng?
View 3 Replies View RelatedI saved an image attached to an email in jpg with 4000 x 2664 pixels to the organizer. Even though I designated jpg format, it was saved in png and was downsized to 150 x 100 pixels. How do I save the attachment in jpg format and not be downsized?
View 5 Replies View RelatedWhy does my PSE11 make my entire computer freeze when I try to save an image I've jsut edited?
View 2 Replies View RelatedCan anyone tell me what color settings I need to set in photoshop in order to avoid this from happening? It only happens once in a while and I don't know what I've done to fix it or screw it up. What happens is that when I'm in photoshop and I do a "save for web" my document jumps to image ready and when viewing '2 up' for optimization purposes and comparison, I realize that the original view is actually duller in color and does not look like the original in photoshop. The blacks are definitely not as black.
View 1 Replies View Related