I saved an image attached to an email in jpg with 4000 x 2664 pixels to the organizer. Even though I designated jpg format, it was saved in png and was downsized to 150 x 100 pixels. How do I save the attachment in jpg format and not be downsized?
View 5 Repliesok, i have a jpeg i want to email. i click on attach and the drop down comes up, i navigate to the image i want and highlight. at this point--always in the past up until last week--a thumbnail of the image shows up in the column to the right of the name of the image, so i can make sure i'm sending the right image. suddenly, i'm no longer seeing the image to the right. (see attached).
View 4 Replies View RelatedI have followed steps to share a photo using email, after I put the recipients name in and click ok it seems to freeze, (the egg timer as i would call it) doesn't move.I have to switch the computer off and restart.
View 5 Replies View RelatedAttaching a JPG to an email, says its a larger size than the original?
View 2 Replies View RelatedI have just purchased Elements 12 and notice that while working in Expert, when I click Share, the choices presented are all the social networks, but email is simply not a choice! So how do I send an email with an image using Elements 12?
View 2 Replies View RelatedTrying to send photo by email attachment or photo email.
Had previously done the verification code thing and got the code and have been sending pics by photo email.Have got PS10 loaded to my Desk Top - main system and also my laptop .When trying now to send pics on my DeskTop I can get to the (maybe second) screen where you choose the size of the phots and then I get the Verification Code screen - which tells me that an 'initial verification code' will be emailed to the chosen email - but when I say continue, I go to the next screen of the Photo email and then when trying to send the phto email it locks up and says an unexpected error has taken place ...
I have sent some photos via the laptop but it seems to be very hit and miss at the moment.Also I have some problems opening PSE10 - When I click on the icon - I get the initial "organise or edit" screen where I choose organise - but then all that happens is this screen closes and the Organiser does not open. Most of the time I'm left with maybe shutting down my whole computer and starting up again and it works again.
How to change the view in CS6 so that it is as sharp as my email program?
View 20 Replies View RelatedI have attached and image to a surface of a part and when I bring it back to AutoCad I can not see the image.
View 1 Replies View RelatedI need the attached image edited so the people in the photo appear shirtless. The people in the photo needs to have an athletic build and a non-hairy body. I'm new to PhotoShop.
View 7 Replies View RelatedI've installed Elements 11 and imported my pictures and also the tabs. But the result is only a list of tags, the pictures doesn't seem to have any tags attached any longer. What can I do? My previous version of Elements was the 8.
View 1 Replies View RelatedI have the minimum requirements on my system, I have reinstalled (twice) with the proper rebooting afterwards, etc.,
View 1 Replies View RelatedAfter editing I cannot save the photo. I get the message, "file is in use or has been left open". What does this mean?
View 5 Replies View Relatedcan't save an edited raw image as a jpg.
View 1 Replies View Relatedtell me step by step instructions on how to cut an image and leave the background behind, and save just the image with no background??
View 12 Replies View RelatedFIRST, when adding names, places, or events to photos, in Adobe Photoshop Organizer 8, are those tags only saved in the catalog or are they actually appended to and saved with the file? In other words, if those files are copied or moved to another computer, do they retain the information?
Second, is adding and editing tags for a JPEG type file a lossless operation, or does it deteriorate the photo quality?
I am finding that when using Photoshop cs6 on a mac and when saving files as png or web files - the options panel displays as black and you are unable to see any of the options.
View 11 Replies View RelatedHow do I save a thumbnail image in the project bin without it disappearing when I close it?
View 6 Replies View RelatedHow to save edited image after making changes, I find no commit button?
View 2 Replies View RelatedI just downloaded a trial and I want to be able to correct and creat text and save as images (for flier or ticket content that I later convert to jpgs).How do I do that on Elements 10?
View 3 Replies View RelatedI have opened a jpeg as Camera Raw (7.3) and adjusted it and wanted to save it as jpeg, but the only option is *.dng?
View 3 Replies View RelatedIs there are a way to display the attached tags for a photo in manual order, rather than how they are sorted in the keyword tag list?
When I assign tags to a photo, these are displayed in the order in which the tags are sorted in the list of tags (either alphabetically or manual).However, what I want to achieve is to display the tags for a photo in the order of i.e. the people shown on the photo.
how to achieve this?
Environment: CS6 (PS 13.0.1) Mac OS X 10.7.5. Plenty of hardware. (Generally starting with .CR2 RAW.)Recently (maybe since the 13.0.1 update??), I have been having problems with the open and save as dialog boxes.
First. The open file dialog always defaults to Enable: blank (i.e. no file types enabled). Each time I have to go to the bottom of the dropdown list and select "All readable documents" before I can open ANY type of file. I've searched in everyway I can think of looking for some method to have OPEN default to "all readable" but can't find anyway to do this. when whipping around at deadline having to stop each time and make this change is irritating. No other program has this difficulty (including Illustrator and InDesign). PS 5.5 did not exhibit this behavior on the same machine.
Second. When I save as and try to select any file format, say going from psd to tiff, the format dropdown list ALWAYS selects the format ABOVE the one I choose. Example: If I select JPEG, PS tries to save as .iff. If I pull the selection down to JPEG2000 it will then save as standard JPEG. Again just an irritant but, tiff (which I need for several other programs) is last on the list thus there is no way I can go one below it to get tiff format selected. It always comes out as png. Also note that the Format selection indicates the correct format - in the case of tiff the dialog box shows TIFF selected, but the program is appending .png. (Continuing the save as (without altering my selection) always results in the incorrect format no matter what the Format dialog says in the save as operation.) Again, no other program I work with (including several Adobe products) exhibits this behavior.
I seriously need to be able to save as tiff.
I am trying to clean up our drawing database and have run across several drawings that are showing external file references with a status of 'unreferenced'. During a scan early last week of all current revisions of our drawings (about 120000) we uncovered about 7500 drawings that don't quite cut the mustard as it pertains to the use of attachments. I have written a small .NET app that scans through my drawings, but I am having difficulty with one aspect of my probing.
I need to be able to open up an AutoCAD drawing, navigate to said drawings image dictionary, get a RasterImageDef from that dictionary, and then check to see what the 'status' of that drawing is. By 'status' I mean the status as reported in the External References dialog that appears when using the command 'xref'. In particular, I want to write out/show a message when I encounter a drawing with an attachment that has a status of 'Unreferenced', which I take to mean that the drawing was attached at one point, has been unloaded, but not properly detached.
My problem is that I can't seem to get to any property that shows that status. I have used ARXDBG to snoop the database and I can verify that I see the images still in the image dictionary, but not in the drawing itself. I also can't seem to get at thte status of the attachment. To compund the matter, everytime I try to inspect the RasterImageDef object I get, AutoCAD locks up and bombs out.
I am guessing I could get at what I need via C++/ObjectARX but I don't want to go that route if I dont have to. I have attached a snippet of the code I am currently using to scan through my drawings, not perfect or even pretty, but it works.
how to snap such as the attached image? URL....
View 24 Replies View RelatedI have the trial version of 12. I set up the E Mail to the Adobe Mail Server. I do not use Outlook, but G Mail. I received a verification code, and put it in. it seemed to accept that. However, whenever I try to use Photo Mail or E mail attachment all I get is a small blue circle spinning. No E Mail going out.I still have 10 on my desktop and the E Mail is working perfectly.
View 7 Replies View RelatedHow do I email photos with Elements 12? I have a PC with Windows 8.1 and Outlook. I have tried the "Share" approach but it doesn't work.
View 1 Replies View RelatedI use an outside service to make prints. How can I save an image in PSE 11 in either TIFF or JPEG format with the color profile for the outside lab's printer?
View 4 Replies View RelatedWhy does my PSE11 make my entire computer freeze when I try to save an image I've jsut edited?
View 2 Replies View RelatedI'm experiencing a strange behavior when i import a DXF with a plugin for AutoCAD 2012, but only when i'm on Win7 64bits.
The plugin normally (in WinXP) would load the .dxf file, then if it has a reference for an ortophoto picture, it places the picture on the right place and "visible" (you'll get what i mean by this later).
On the other hand, on win7 64bits when i import the dxf file using the plugin, it only shows the frame of the picture, but no picture inside!
cadgis_1
But, if i close the file i just opened and open the .dxf using Autocad "default" open, on the layout the picture is showing just like it was supposed to...
Autocad_layout
So, now i've opened the .dxf using Autocad, let's try again to open it using the plugin and.... voilá! The picture is displayed, bright and shinny! A miracle i must say!
cadgis_2
And if i open it again using the "default" open from Autocad, not only it displays the picture on Layout but also on the Model!
Autocad_Model
I'll attach the dxf with the external .tiff file.
DXF File
Tiff File
I wasn't able to upload the picture, so i've placed in a zip file and attached it to the post.
I've got a issue with working with images. I draw furniture full scale and sometimes it necessary to hard draw and scan the drawing and then attached the image in autocad and trace over the image in AutoCAD 2013. everything is fine until I attach the image, then it freezes with every move that I try to make. The images are around 700 kbs in size. Is there anything I can do or change some kind of setting?? btw. version 2004 doesn't have this problem.
I'm running windows 7 pro
Dell XPS M1710
4 gb memory
attach an image and hide it, but when the user take the mouse over the hidden image, he/she can see it, for example I want to send a daily report to my manager and I want to attach some Image in the drawing and hide it, But it can be seen by moseovering.
View 9 Replies View Related