AutoCAD Inventor :: Fusion Part With An Image Attached Not Seeing Image?
May 2, 2013I have attached and image to a surface of a part and when I bring it back to AutoCad I can not see the image.
View 1 Replies
ADVERTISEMENT
AutoCAD Inventor :: Why Can’t Fusion Save Imported STP File As A Part
Jun 4, 2012Why can’t Inventor Fusion save an imported STP file as a Inventor part?
View 1 Replies View RelatedAutoCAD Inventor :: How To Cut Across Bend In The Attached Part
Oct 31, 2011I'm trying to cut across bend in the attached part. Usually this thing works quite good, but for some reason it's not letting me do it. What Am I doing wrong? How can I do it?
Inventor 2012 Pro.
I7 workstation
AutoCAD Inventor :: Model Plastic Part Which Is Attached To Each Other?
Aug 23, 2013I am trying to model a plastic part which is attached to each other on one side of the edge and it snaps into each other on the other side. I was able to manage the hald section of this part but not sure how to do other half.
how to do these plastic parts?
AutoCAD Inventor :: How To Make Attached Part Adaptive
Dec 1, 2012When I create part .ipt directly in assembly .iam, I can make it adaptive. I'm doing the projection of geometry. Detail goes adaptive. Geometry appears as a link.
But if I put in the assembly finished parts or remove part created in the assembly, and then insert it back, the adaptability of parts did not get to create. Then the projection geometry inserts usual nonadaptive geometry without reference.
Can I make a finished part adaptive, without creating a component at the place in this assembly?
AutoCAD Inventor :: How To Create Flat Pattern Of Attached Part
Nov 6, 2013Is there any way to create flat pattern of a part I attached ?
View 3 Replies View RelatedAutoCAD Inventor :: Create Structure Using Attached Part Geometry?
Mar 19, 2012I want to create a structure using the attached part geometry, what would be the best way to make the crosses coincident with the two long columns? (just like the 2 at the top but without having to manually trim each line, if it could be constrained to variable parameters even better)
The structure has the same geometry on all four sides so i intend to circular patern the frame generator components around the Z axis, any better workflows?
AutoCAD Inventor :: Content Center Part With Decal Attached To Model
Oct 15, 2013I'm trying to create a content center part with a decal attached to the model. The problem I am facing it that the decal is not adjusting in size when the ipt is placed from the content center. The decal does adjust in the original ipt.
View 2 Replies View RelatedAutoCAD .NET :: How To Get Status Of Attached Image
May 24, 2010I am trying to clean up our drawing database and have run across several drawings that are showing external file references with a status of 'unreferenced'. During a scan early last week of all current revisions of our drawings (about 120000) we uncovered about 7500 drawings that don't quite cut the mustard as it pertains to the use of attachments. I have written a small .NET app that scans through my drawings, but I am having difficulty with one aspect of my probing.
I need to be able to open up an AutoCAD drawing, navigate to said drawings image dictionary, get a RasterImageDef from that dictionary, and then check to see what the 'status' of that drawing is. By 'status' I mean the status as reported in the External References dialog that appears when using the command 'xref'. In particular, I want to write out/show a message when I encounter a drawing with an attachment that has a status of 'Unreferenced', which I take to mean that the drawing was attached at one point, has been unloaded, but not properly detached.
My problem is that I can't seem to get to any property that shows that status. I have used ARXDBG to snoop the database and I can verify that I see the images still in the image dictionary, but not in the drawing itself. I also can't seem to get at thte status of the attachment. To compund the matter, everytime I try to inspect the RasterImageDef object I get, AutoCAD locks up and bombs out.
I am guessing I could get at what I need via C++/ObjectARX but I don't want to go that route if I dont have to. I have attached a snippet of the code I am currently using to scan through my drawings, not perfect or even pretty, but it works.
AutoCAD 2010 :: Importing DXF With Image Attached
Aug 1, 2013I'm experiencing a strange behavior when i import a DXF with a plugin for AutoCAD 2012, but only when i'm on Win7 64bits.
The plugin normally (in WinXP) would load the .dxf file, then if it has a reference for an ortophoto picture, it places the picture on the right place and "visible" (you'll get what i mean by this later).
On the other hand, on win7 64bits when i import the dxf file using the plugin, it only shows the frame of the picture, but no picture inside!
cadgis_1
But, if i close the file i just opened and open the .dxf using Autocad "default" open, on the layout the picture is showing just like it was supposed to...
Autocad_layout
So, now i've opened the .dxf using Autocad, let's try again to open it using the plugin and.... voilá! The picture is displayed, bright and shinny! A miracle i must say!
cadgis_2
And if i open it again using the "default" open from Autocad, not only it displays the picture on Layout but also on the Model!
Autocad_Model
I'll attach the dxf with the external .tiff file.
DXF File
Tiff File
I wasn't able to upload the picture, so i've placed in a zip file and attached it to the post.
AutoCad :: 2013 Freezing With Attached Image
Jun 24, 2012I've got a issue with working with images. I draw furniture full scale and sometimes it necessary to hard draw and scan the drawing and then attached the image in autocad and trace over the image in AutoCAD 2013. everything is fine until I attach the image, then it freezes with every move that I try to make. The images are around 700 kbs in size. Is there anything I can do or change some kind of setting?? btw. version 2004 doesn't have this problem.
I'm running windows 7 pro
Dell XPS M1710
4 gb memory
AutoCad :: Show Attached Image Just By Mouse-over
Sep 12, 2012attach an image and hide it, but when the user take the mouse over the hidden image, he/she can see it, for example I want to send a daily report to my manager and I want to attach some Image in the drawing and hide it, But it can be seen by moseovering.
View 9 Replies View RelatedAutoCAD .NET :: Reading Attached Image Directly From Memory Using API?
Nov 30, 2013I have a large JPEG image (10000*11000px), attached to an Autocad drawing, that I want to crop multiple times. I cannot load it into memory using .Net, I get an out of memory exception. the only thing I think I can do is read it directly from Autocad. To do that, there is a method of the "RasterImageDef" class called "OpenImage" witch returns an IntPtr to the image. I tried to create a Bitmap object from the IntPtr and the save it to disk. I get no errors but the saved image is black. here' the code :
public static void IntPtrTest(){ Document doc = Application.DocumentManager.MdiActiveDocument; Database db = doc.Database; Editor ed = doc.Editor; ObjectId imageDict = RasterImageDef.GetImageDictionary(db);
[Code]....
AutoCAD Inventor :: Part List With Thumbnail Image
Oct 14, 2013code for exporting the thumbnail image to excel URL......will this work with Inventor 2014...i knew that there is a Bom tolls pro avaolable in Autodesk Exchange apps but it is apaid version.
View 5 Replies View RelatedIllustrator :: How To Snap Attached Image
Jun 19, 2012how to snap such as the attached image? URL....
View 24 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Change (Reference Name) Of Attached IMAGE Xref TIFF
Feb 13, 2013I am trying to write a LISP that does the following:
-Open drawing
-Saveas as NEW drawing based on certain criteria from DCL menu
-Deletes old drawing
-*THEN, if drawing contain attached IMAGE FILE (.tiff in my case)
-Rename image file and repath image file based on the new file name
I have gotten it to do all of this, except I can not figure out how to change the "reference name" of the attached image file (.tiff)
Is this read-only data? I can manualy change it under xref manager, so there should be a way to do it via code...
The closest I have gotten:
;;after renaming and repath image file...
(SETQ NAME2 (substr (getvar "dwgname") 1 (- (strlen (getvar "dwgname")) 4)))
(setq item (vlax-ename->vla-object (entlast)));convert to vl object
(setq check (vlax-property-available-p item "Name" T));check if the entity can be updated
;if it can
(if check
;change value to match
(vlax-put-property item 'Name NAME2))
'Name seems to be valid w/ xref'd blocks but not xref'd/attached image files..
Photoshop :: Image Not Shown Up When Attached To Email
May 26, 2012ok, i have a jpeg i want to email. i click on attach and the drop down comes up, i navigate to the image i want and highlight. at this point--always in the past up until last week--a thumbnail of the image shows up in the column to the right of the name of the image, so i can make sure i'm sending the right image. suddenly, i'm no longer seeing the image to the right. (see attached).
View 4 Replies View RelatedGIMP :: Overlay Portion Of Image With Faded Map With Non-transparent Part Of Second Image
Apr 4, 2012I have a PNG image with only one layer as a start point. It has a faded map on it.
I have a second PNG image with a hex grid on it. I do colour to Alpha to establish transparency on the hex grid for white filled hexes (others are not filled with white).
Now, I wish to overlay a portion of the first image with the faded map with the non-transparent part of the second image.
So I select by colour (for the hexes not filled with white) on the second image (the overlay) and I then paste to the first image (after creating a transparency layer and selecting it to receive the overlay).
I see the desired overlay section (minus any transparent stuff as expected), however it is centered over the map in the first image, not where I want it to be. It is a floating selection and must be anchored. So I select the anchor icon in the layer dialog and I think I anchor it into the transparency layer on the first image (that's what I'm trying to do anyway).
And then my problem:
I want to move the thing I just pasted in to the right place with respect to the underlying faded map. I attempt to use the move tool, but all I move is the background map (pretty much the opposite of what I want).
Nothing I do seems to let me reselect the pasted-in overlay so that I can move it.
Why I can't ever reposition the pasted in overlay? It should be in the transparency layer I created but even if I select all, I don't seem to be able to move anything other than the background image.
Paint.NET :: Remove Part Of Image Or Transparent To Stay In Created Image
Dec 29, 2011I was just wondering as to whether its possible to keep the checkered base which you get when you remove part of an image or have it transparent to stay in the created image.
I am sure you all know this.
Here is the YouTube background which I have created and wondering if I am able to keep the checkered base or whatever in the image after I have saved it rather than print screening and pasting it back like a jigsaw puzzle.
GIMP :: Ability To Copy / Cut Image Or Part From One Open Image Into Another
Nov 25, 2013I have been using gimp now for about 2 months and have just upgraded my OS to Mavericks and upgraded Gimp to 2.8.8.
Upon doing this I seem to have lost the ability to copy/cut an image or part thereof from one open image into another... Example:
I have an image window open with a picture a car and I have an image window open with a race track back ground.
I want to copy the car from image 1 into image 2, but for some reason I cannot do this function anymore. When attempting it, once the item is copies to the clipboard and I then swap to the second image, when I paste as a new layer it pastes the clipboard from that image and not the image from the first window...
Photoshop :: Attached Image Edited So People In Photo Appear Shirtless?
Apr 18, 2012I need the attached image edited so the people in the photo appear shirtless. The people in the photo needs to have an athletic build and a non-hairy body. I'm new to PhotoShop.
View 7 Replies View RelatedPhotoshop Elements :: Correctly Save Image Attached To Email?
Jan 23, 2013I saved an image attached to an email in jpg with 4000 x 2664 pixels to the organizer. Even though I designated jpg format, it was saved in png and was downsized to 150 x 100 pixels. How do I save the attachment in jpg format and not be downsized?
View 5 Replies View RelatedAutoCAD Inventor :: How To Get Fusion Not To Open
Mar 21, 2013I downloaded a .step file from a construction website URL..... It is of a screw. Anyway I want to edit the screw but when I open it, it opens as a weird ipt. It's like the part is an assembly but it's not a logo that I worked with before. Anyway I right click on the Base1 file and hit edit form. When I do that Autodesk Inventor Fusion opens. Is there a way I can edit this part in normal Autodesk Inventor or do I have to learn how to use the fusion program?
View 3 Replies View RelatedAutoCAD 2010 :: Converting DWG To STP With Inventor Fusion?
Apr 29, 2011I'm trying to convert a 3D model saved as a .dwg in AutoCAD 2011 to a .stp file using Inventor Fusion Technology Preview. I did it once and it worked perfect. But since, every time I save the .dwg as a .stp in Fusion, it scales the object down to 39% of the original.
View 5 Replies View RelatedAutoCad 3D :: Resize Solid In Inventor Fusion?
Nov 1, 2012I am having a rather complex 3D structure i have buid out of solids in AutoCAD and then colored and finnished in Inventor Fusion. The whole image was made for a journal-cover.
I drew the basic structures in AutoCAD and then transfered to Inventor where there have been added some more smooth edges and a rectangular pattern of 1000 objects.
Now in the end i find out that only one single 3D solid is too big and i want to resize/scale it.
It seems impossible for me to do that in Inventor, so I transfered the whole file back to AutoCAD. Now i have the problem that AutoCAD is recognizing my objects now only as "block references". It is easy to resize the object now, but i do not know how to get the block refences become 3D solids again and transfer them back to inventor.
If i just try to transfer the whole data or save and load Inventor isnt opening anything.
AutoCAD Inventor :: Why No Fusion Ribbon Panel
Apr 27, 2012I was trying to show another user the Edit in Fusion feature in Inventor 2012 but she doesn't have that ribbon panel. We went into the Part tab in Application Options and Inventor Fusion was selected to Edit Base Solids. We even unselected it, applied it, closed the options and then selected it again. But still there is no Fusion panel under the Model tab when editing a part. Yes, it's installed on her machine. We checked.
The only difference is that she's also installed the 2013 suite, as well. I have the Fusion panel and have not installed any 2013 apps.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
AutoCad :: Does Inventor Fusion Support IGES
Nov 23, 2012Any good IGES to Autocad converter? Does Inventor fusion support IGES?
View 5 Replies View RelatedAutoCad :: If Remove Fusion Inventor Does It Affect 2012?
Jul 3, 2012I have recently put Auto Cad 2012 on my laptop, but seems to be very slow. While doing this fusion inventor also downloaded.I was wondering could I remove Inventor as I don't use it, without that effecting my auto cad program? All I do is just basic 2D drawings on autocad and need to speed it up. Could I also remove Autodesk 2012 libary?
View 3 Replies View RelatedAutoCAD Inventor :: Fusion Changes Units From Inches To Centimeters
Jan 16, 2012When I want to edit a solid part in Inventor 2012, I click the "Edit Form" button which automatically launches Fusion. Units are defaulted to cm every time (I don't understand why it can't autodetect units) and the first thing I do is switch them to inches (english). I edit my part then return to Inventor. The part has been resized (smaller by a factor of 2.54) and moved off my original origin. I cannot figure out how to get around this HUGE problem. This has made Fusion useless to me and has drastically reduced the functionality of my ablility to solid edit.
If Fusion is intigrated into Inventor, why does it behave as a totally different product (reversed scroll wheel direction, different units, no refrencing between Inventor features and Fusion, etc.)? It's as if the Fusion programing team and the Inventor programming team met for just long enough to put the Fusion button in Inventor and nothing more.
AutoCAD Inventor :: Insert JPG Image In IDW - Image Icon Grayed Out
Mar 23, 2011I am trying to insert a JPG image in my IDW, but the "image" icon is greyed out?
View 5 Replies View RelatedAutoCAD Inventor :: Fusion 2012 Freezes And Is Slow Responding?
Oct 4, 2011I just started using Inventor and it is very slow, freezes for a few seconds, and is non responsive. My AutoCAD Architecture 2012 works just fine.
View 6 Replies View Related