ok, i have a jpeg i want to email. i click on attach and the drop down comes up, i navigate to the image i want and highlight. at this point--always in the past up until last week--a thumbnail of the image shows up in the column to the right of the name of the image, so i can make sure i'm sending the right image. suddenly, i'm no longer seeing the image to the right. (see attached).
View 4 RepliesI saved an image attached to an email in jpg with 4000 x 2664 pixels to the organizer. Even though I designated jpg format, it was saved in png and was downsized to 150 x 100 pixels. How do I save the attachment in jpg format and not be downsized?
View 5 Replies View RelatedI have followed steps to share a photo using email, after I put the recipients name in and click ok it seems to freeze, (the egg timer as i would call it) doesn't move.I have to switch the computer off and restart.
View 5 Replies View RelatedAttaching a JPG to an email, says its a larger size than the original?
View 2 Replies View RelatedHow to change the view in CS6 so that it is as sharp as my email program?
View 20 Replies View RelatedI have attached and image to a surface of a part and when I bring it back to AutoCad I can not see the image.
View 1 Replies View RelatedTrying to send photo by email attachment or photo email.
Had previously done the verification code thing and got the code and have been sending pics by photo email.Have got PS10 loaded to my Desk Top - main system and also my laptop .When trying now to send pics on my DeskTop I can get to the (maybe second) screen where you choose the size of the phots and then I get the Verification Code screen - which tells me that an 'initial verification code' will be emailed to the chosen email - but when I say continue, I go to the next screen of the Photo email and then when trying to send the phto email it locks up and says an unexpected error has taken place ...
I have sent some photos via the laptop but it seems to be very hit and miss at the moment.Also I have some problems opening PSE10 - When I click on the icon - I get the initial "organise or edit" screen where I choose organise - but then all that happens is this screen closes and the Organiser does not open. Most of the time I'm left with maybe shutting down my whole computer and starting up again and it works again.
I need the attached image edited so the people in the photo appear shirtless. The people in the photo needs to have an athletic build and a non-hairy body. I'm new to PhotoShop.
View 7 Replies View RelatedI have just purchased Elements 12 and notice that while working in Expert, when I click Share, the choices presented are all the social networks, but email is simply not a choice! So how do I send an email with an image using Elements 12?
View 2 Replies View RelatedI have been using Photoshop CS2 for many years and have constantly "lived with" a bug in Bridge whereby, instead of an image thumbnail, there is just an icon shown.
This is the same icon that appears before Bridge has read all the images to produce the thumbnails - but some of them get "stuck" and there seems to be no way to make Bridge "read" the image and produce the thumbnail. Pressing "View" "Refresh" (or PF5) does not work. Is there any fix I can download for this?
I have Windows 7 and recently unistalled PSE 10 and it did not have this issue; Now Photoshop CS6 is displaying the menu dropdowns as shown in Image 1. Bridge CS6 does not have the issue;it is showing the menu bars correctly (see Image 2). I downloaded and installed all updates.
View 2 Replies View RelatedI am trying to clean up our drawing database and have run across several drawings that are showing external file references with a status of 'unreferenced'. During a scan early last week of all current revisions of our drawings (about 120000) we uncovered about 7500 drawings that don't quite cut the mustard as it pertains to the use of attachments. I have written a small .NET app that scans through my drawings, but I am having difficulty with one aspect of my probing.
I need to be able to open up an AutoCAD drawing, navigate to said drawings image dictionary, get a RasterImageDef from that dictionary, and then check to see what the 'status' of that drawing is. By 'status' I mean the status as reported in the External References dialog that appears when using the command 'xref'. In particular, I want to write out/show a message when I encounter a drawing with an attachment that has a status of 'Unreferenced', which I take to mean that the drawing was attached at one point, has been unloaded, but not properly detached.
My problem is that I can't seem to get to any property that shows that status. I have used ARXDBG to snoop the database and I can verify that I see the images still in the image dictionary, but not in the drawing itself. I also can't seem to get at thte status of the attachment. To compund the matter, everytime I try to inspect the RasterImageDef object I get, AutoCAD locks up and bombs out.
I am guessing I could get at what I need via C++/ObjectARX but I don't want to go that route if I dont have to. I have attached a snippet of the code I am currently using to scan through my drawings, not perfect or even pretty, but it works.
how to snap such as the attached image? URL....
View 24 Replies View RelatedI'm experiencing a strange behavior when i import a DXF with a plugin for AutoCAD 2012, but only when i'm on Win7 64bits.
The plugin normally (in WinXP) would load the .dxf file, then if it has a reference for an ortophoto picture, it places the picture on the right place and "visible" (you'll get what i mean by this later).
On the other hand, on win7 64bits when i import the dxf file using the plugin, it only shows the frame of the picture, but no picture inside!
cadgis_1
But, if i close the file i just opened and open the .dxf using Autocad "default" open, on the layout the picture is showing just like it was supposed to...
Autocad_layout
So, now i've opened the .dxf using Autocad, let's try again to open it using the plugin and.... voilá! The picture is displayed, bright and shinny! A miracle i must say!
cadgis_2
And if i open it again using the "default" open from Autocad, not only it displays the picture on Layout but also on the Model!
Autocad_Model
I'll attach the dxf with the external .tiff file.
DXF File
Tiff File
I wasn't able to upload the picture, so i've placed in a zip file and attached it to the post.
I've got a issue with working with images. I draw furniture full scale and sometimes it necessary to hard draw and scan the drawing and then attached the image in autocad and trace over the image in AutoCAD 2013. everything is fine until I attach the image, then it freezes with every move that I try to make. The images are around 700 kbs in size. Is there anything I can do or change some kind of setting?? btw. version 2004 doesn't have this problem.
I'm running windows 7 pro
Dell XPS M1710
4 gb memory
attach an image and hide it, but when the user take the mouse over the hidden image, he/she can see it, for example I want to send a daily report to my manager and I want to attach some Image in the drawing and hide it, But it can be seen by moseovering.
View 9 Replies View RelatedI have a large JPEG image (10000*11000px), attached to an Autocad drawing, that I want to crop multiple times. I cannot load it into memory using .Net, I get an out of memory exception. the only thing I think I can do is read it directly from Autocad. To do that, there is a method of the "RasterImageDef" class called "OpenImage" witch returns an IntPtr to the image. I tried to create a Bitmap object from the IntPtr and the save it to disk. I get no errors but the saved image is black. here' the code :
public static void IntPtrTest(){ Document doc = Application.DocumentManager.MdiActiveDocument; Database db = doc.Database; Editor ed = doc.Editor; ObjectId imageDict = RasterImageDef.GetImageDictionary(db);
[Code]....
how to create a hyperlink to email a PDF form to an email address. So the user finished completing the form fields and then wants to email the current form they just filled out in Acrobat and want to submit the filled out pdf to an email address that is listed on the document.
View 1 Replies View RelatedEmail Photos as Attachments from Lightroom 5
Is it possible to email photos as attachments (jpg), not embededed within email? Mac users report when they receive the email, photo is only embedded, there is no attachment so they cannot download.
How to email a picture in raw instead of Jpeg....I want them in raw and lightroom keeps putting the emails pictures in jpeg.
View 11 Replies View Relatedhow do i email an image from LR4 without distorting it.
View 2 Replies View RelatedI'm almost finish tracing my image in AutoCAD but suddenly the lines are not showing on top of the image. But it is at the back of the image.
View 2 Replies View RelatedThe example I use in this question has already been solved by friendly posters here and this is not a rehash... just using the materials at hand to illustrate the point.The effort here was to remove the trailing shadows shown in the first image (at the included URL below).
In that thread 2 posters showed how to do this using a completely different approach.That is, using Arrange/Apply ClipView..However, I used the help manual to try to do this, at a section headed Combining Shapes
When subtracting, intersecting and slicing, you can either use the topmost selected shape to do the "cutting" of the lower shapes, or you can use a mask.To use a mask to cut shapes, first select the shapes and then turn on mask mode. All objects except for the selected shapes disappear while mask mode is on.
Then draw your cutting shape using the main drawing tools (Freehand Tool, Shape Editor, Rectangle Tool, etc.) or paste the shape if you already drew it and copied it. Then select the Arrange->Combine Shapes operation. The mask shape is used to cut the shapes underneath. I never did see anything describing the details of how to do the cutting with one of the shapes already in the composition so I went the mask route, which is explained there.
So I selected all, then went to mask mode, drew a rectangle (at the right in 2nd screen grab below) then Arrange/Combine shapes/ and none of those selections: Add, subtract, intersect and slice... appear to do a darned thing to the objects.
In LR4 the Library Filters showed the image count in each category.
No longer shows in LR5.
Is there a preference I can change or is this just an oversight/bug?
I have many inline formulas (imported from Word file via using mathtype) in PDF article made by ID. But when I export the articles as HTML, the images for formulas become much larger than shown in PDF version. How can i keep the exported images to the same size as they are shown the PDF file? I know I can edit the html file to specify image size, but that is the ideal work flow.
View 3 Replies View RelatedI am trying to write a LISP that does the following:
-Open drawing
-Saveas as NEW drawing based on certain criteria from DCL menu
-Deletes old drawing
-*THEN, if drawing contain attached IMAGE FILE (.tiff in my case)
-Rename image file and repath image file based on the new file name
I have gotten it to do all of this, except I can not figure out how to change the "reference name" of the attached image file (.tiff)
Is this read-only data? I can manualy change it under xref manager, so there should be a way to do it via code...
The closest I have gotten:
;;after renaming and repath image file...
(SETQ NAME2 (substr (getvar "dwgname") 1 (- (strlen (getvar "dwgname")) 4)))
(setq item (vlax-ename->vla-object (entlast)));convert to vl object
(setq check (vlax-property-available-p item "Name" T));check if the entity can be updated
;if it can
(if check
;change value to match
(vlax-put-property item 'Name NAME2))
'Name seems to be valid w/ xref'd blocks but not xref'd/attached image files..
is there any way to send an immage from the canvas to a email message.
View 2 Replies View RelatedI know that I asked this awhile ago, but I coudln't find the post. I need to get a jpeg from email into photoshop. When I drag it onto the desktop, it isn't highlighted to select to put into photoshop. I have a macintosh.
I don't have photoshop CS2... it's CS...
I have been trying to cut out the attached handbag. I have used several tools, working with masks, opacities etc. Nothing really works.
View 9 Replies View Relatedhow the attached 'motion blur/shake' text effect has been done ...and how can i replicate/re-create it in PS ?
View 2 Replies View RelatedPhotoshop 6 opens up with a huge black background. I want it gone, so that I can see my desktop in the background... that is, until I press "F" for different screen mode. How to I make it so that I have the desktop in the background in the basic screen mode without removing the options pallette?
View 1 Replies View Related