I've got a issue with working with images. I draw furniture full scale and sometimes it necessary to hard draw and scan the drawing and then attached the image in autocad and trace over the image in AutoCAD 2013. everything is fine until I attach the image, then it freezes with every move that I try to make. The images are around 700 kbs in size. Is there anything I can do or change some kind of setting?? btw. version 2004 doesn't have this problem.
I'm running windows 7 pro
Dell XPS M1710
4 gb memory
Updating the attached dwg (Xref),The file Q1 is attached to the file Q5 (attached). Edits are applied to the Q1. These edits are not transferred to the Q5 despite the fact that the “regenerate” button is pressed.
What might be the issue here? How the edits on the Xref files are reflected directly to where they are attached?
I am trying to attach a png image to an AutoCAD file and the image appears blank with a border. When I insert the png file as an OLE object, it shows as an icon with the filename. BMP images work fine.
I'm working with alot of overlapped x-refs and every layer for each x-ref will come in to the drawing. When I'm using the viewports I need to freeze all the layers for some x-refs that don't need to show in that viewport. Since each x-ref has well over 70 layers I am wondering if there is a simple way to freeze all the x-ref layers in the viewport.
I am trying to clean up our drawing database and have run across several drawings that are showing external file references with a status of 'unreferenced'. During a scan early last week of all current revisions of our drawings (about 120000) we uncovered about 7500 drawings that don't quite cut the mustard as it pertains to the use of attachments. I have written a small .NET app that scans through my drawings, but I am having difficulty with one aspect of my probing.
I need to be able to open up an AutoCAD drawing, navigate to said drawings image dictionary, get a RasterImageDef from that dictionary, and then check to see what the 'status' of that drawing is. By 'status' I mean the status as reported in the External References dialog that appears when using the command 'xref'. In particular, I want to write out/show a message when I encounter a drawing with an attachment that has a status of 'Unreferenced', which I take to mean that the drawing was attached at one point, has been unloaded, but not properly detached.
My problem is that I can't seem to get to any property that shows that status. I have used ARXDBG to snoop the database and I can verify that I see the images still in the image dictionary, but not in the drawing itself. I also can't seem to get at thte status of the attachment. To compund the matter, everytime I try to inspect the RasterImageDef object I get, AutoCAD locks up and bombs out.
I am guessing I could get at what I need via C++/ObjectARX but I don't want to go that route if I dont have to. I have attached a snippet of the code I am currently using to scan through my drawings, not perfect or even pretty, but it works.
-Inventor 2013 SP1.1 (Issue) -Inventor 2011 SP2 (No Issue)
Templates have been coverted up from 2011, keeping copies of the old templates in separate folders all under the same parent directory.Have 2013 mapped to the folder with updated templates located on a network drive. Total of 18 temolates including the standard templates.
The Issue:I start Inventor 2013 or open an .ipt/.iam ect. I now want to create a new file so I click the "New" Icon.Inventor freezes for 10-15seconds and finally shows the templates.After that if you click on any of the templates it freezes instantly. Or if you scroll the browser bar down to navigate the folder. 15-35 seconds
After selecting the correct template it freezes for about 15 seconds.For those keeping track Thats 40-65 seconds just to open a drawing...
For Inventor 2011.Click, Click, Click. Open...Takes maybe 5 seconds.
I'm experiencing a strange behavior when i import a DXF with a plugin for AutoCAD 2012, but only when i'm on Win7 64bits.
The plugin normally (in WinXP) would load the .dxf file, then if it has a reference for an ortophoto picture, it places the picture on the right place and "visible" (you'll get what i mean by this later).
On the other hand, on win7 64bits when i import the dxf file using the plugin, it only shows the frame of the picture, but no picture inside!
cadgis_1
But, if i close the file i just opened and open the .dxf using Autocad "default" open, on the layout the picture is showing just like it was supposed to...
Autocad_layout
So, now i've opened the .dxf using Autocad, let's try again to open it using the plugin and.... voilá! The picture is displayed, bright and shinny! A miracle i must say!
cadgis_2
And if i open it again using the "default" open from Autocad, not only it displays the picture on Layout but also on the Model!
Autocad_Model
I'll attach the dxf with the external .tiff file.
DXF File
Tiff File
I wasn't able to upload the picture, so i've placed in a zip file and attached it to the post.
attach an image and hide it, but when the user take the mouse over the hidden image, he/she can see it, for example I want to send a daily report to my manager and I want to attach some Image in the drawing and hide it, But it can be seen by moseovering.
I have a large JPEG image (10000*11000px), attached to an Autocad drawing, that I want to crop multiple times. I cannot load it into memory using .Net, I get an out of memory exception. the only thing I think I can do is read it directly from Autocad. To do that, there is a method of the "RasterImageDef" class called "OpenImage" witch returns an IntPtr to the image. I tried to create a Bitmap object from the IntPtr and the save it to disk. I get no errors but the saved image is black. here' the code :
public static void IntPtrTest(){ Document doc = Application.DocumentManager.MdiActiveDocument; Database db = doc.Database; Editor ed = doc.Editor; ObjectId imageDict = RasterImageDef.GetImageDictionary(db);
I am trying to write a LISP that does the following:
-Open drawing
-Saveas as NEW drawing based on certain criteria from DCL menu
-Deletes old drawing
-*THEN, if drawing contain attached IMAGE FILE (.tiff in my case)
-Rename image file and repath image file based on the new file name
I have gotten it to do all of this, except I can not figure out how to change the "reference name" of the attached image file (.tiff)
Is this read-only data? I can manualy change it under xref manager, so there should be a way to do it via code...
The closest I have gotten:
;;after renaming and repath image file...
(SETQ NAME2 (substr (getvar "dwgname") 1 (- (strlen (getvar "dwgname")) 4))) (setq item (vlax-ename->vla-object (entlast)));convert to vl object (setq check (vlax-property-available-p item "Name" T));check if the entity can be updated ;if it can (if check ;change value to match (vlax-put-property item 'Name NAME2))
'Name seems to be valid w/ xref'd blocks but not xref'd/attached image files..
ok, i have a jpeg i want to email. i click on attach and the drop down comes up, i navigate to the image i want and highlight. at this point--always in the past up until last week--a thumbnail of the image shows up in the column to the right of the name of the image, so i can make sure i'm sending the right image. suddenly, i'm no longer seeing the image to the right. (see attached).
I need the attached image edited so the people in the photo appear shirtless. The people in the photo needs to have an athletic build and a non-hairy body. I'm new to PhotoShop.
I saved an image attached to an email in jpg with 4000 x 2664 pixels to the organizer. Even though I designated jpg format, it was saved in png and was downsized to 150 x 100 pixels. How do I save the attachment in jpg format and not be downsized?
When using a Neat NM-1000 scanner and I acqire image from scanner the program loads the Neat software to scan the image and runs the photo through the scanner and then freezes the software and will not allow me to continue. Is there and update I need or some settings I should make somewhere in the software?
I'm running Map 2014 SP1 on my machine and the rest of the users in our organization are running Map 2013.
If I save a drawing back to a dwg 2010 version all is fine, but if I save the same drawing to a dwg 2013 version other users are not able to activate and query from it, even though they are otherwise still able to open and work with the drawing.
I have some building department forms in pdf format that I have inserted into paperspace in a layout. They appear fine in layout view and in print preview.
But when I print the layout to pdf, the attached pdfs all print faded. The pdf (as an underlay) is set to fade = 0, contrast = 100. No transparency setting I can find. The layer transparency is 0 and the plot style is at 100% screening.
If I set the layout to *NOT* print transparencies, then the pdfs print dark as they should. But I sometimes use transparency for shading or poche, and would like to be able to use that and also have an inserted pdf print properly.
Is there a way to set pdf underlays to print at full density? I seem to remember finding a global setting for this once, but can't find it now.
I have an access database attached to a blank drawing. The database is a list of existing oil wells. I want to have civil3d (or map) create a custom block (I already have the blocks created) inserted at a coordinate in the database and propagate the other fields in the database into attributes in the blocks. For instance, the first two fields in the database are the x and y. Some of the other fields in the database are the well status and company name. Is it possible for Map to read the first two fields to know where to put the block, then select the block to insert based on wells status and company name, and then complete attributes from the other fields (section, township, range, county, etc) into the block? I'm having a hard time getting my head wrapped around the map3d user's guide talking about topologies, link templates, object classifications, etc. Using Civil3D 2013 infrastructure design suite, Win 7 64-bit, office 64-bit.
Dell Precision T3600 - Windows 7 64-bit NVIDIA Quadro 600 Intel(R) Xenon(R) CPU E5-1607 0 @ 3.00GHz 3.00GHz 8 GB ram - Two 1TB raid
Is there any way to change the names of attached images? I have many drawings that thas about 10 images attached to each drawing; I have to change the name of images and I would like to assign these renamed images to the images attached to the drawing. Is there any way? Or will I have to detach the images and then attach them again?
I have an access database attached to a blank drawing. The database is a list of existing oil wells. I want to have civil3d (or map) create a custom block (I already have the blocks created) inserted at a coordinate in the database and propagate the other fields in the database into attributes in the blocks. For instance, the first two fields in the database are the x and y. Some of the other fields in the database are the well status and company name. Is it possible for Map to read the first two fields to know where to put the block, then select the block to insert based on wells status and company name, and then complete attributes from the other fields (section, township, range, county, etc) into the block? I'm having a hard time getting my head wrapped around the map3d user's guide talking about topologies, link templates, object classifications, etc.
Dell Precision T3600 - Windows 7 64-bit NVIDIA Quadro 600 Intel(R) Xenon(R) CPU E5-1607 0 @ 3.00GHz 3.00GHz 8 GB ram - Two 1TB raid
I would like to either move or copy individual ACAD files to another PC (though a server) without loosing all the pathways/ connections to external image files used in rendering, (these being mostly materials, graphics & logos relating to each individual ACAD file, not xrefs). Is it possible in ACAD 2005?
I'm trying to cut across bend in the attached part. Usually this thing works quite good, but for some reason it's not letting me do it. What Am I doing wrong? How can I do it?
I have a sketchedsymbol with leaderline. How can I get the BOM of the item this is attached to? I don't see any referenced way to do this. I assume it's possible because a balloon can get this info.
The full extent of what I want to do is to create a split balloon symbol. The top portion of the balloon with hold the detail number, the botton half will hold a user prompted text entry.
I have just upgraded to 2012 and I get a brief freeze when I enter a command such as line.
It only appears to happen when dynamic input is on or while I am in ortho mode. It seems to freeze while computing the coordinates for displaying. I have looked up the help files on direct entry thinking it might be linked to that but that didn't find any solution.
I've used the transitional constraints with good results but unfortunatley the cams are moving all over the place when I try to move them by dragging with the mouse and not very stable.
I'm trying to animate a couple of bodies along a path with a workpoint that will move the assembly at the beginning created using a rectangular array along the path. I have a UJ in the middle of the bodies attaching them together. As I change the distance of the rectangular array it will move the first body as expected. How I constrain the other body to follow along the path with the ride points as labeled?
I've trieds almost everything I think. Should I use dynamics to simulate this? I don't have the dynamic installed however is there a way I can get ahold of a test version so I can test this?
I am trying to model a plastic part which is attached to each other on one side of the edge and it snaps into each other on the other side. I was able to manage the hald section of this part but not sure how to do other half.
I have tried downloading and installing the Inventor LT trial twice now but for some reason I keep getting errors and it won't run. convert the attached .dwg files to both .stp and .igs file format?
I have a drawing when attached into another drawing, the coordinates have an exact 500,000 shift in the X value and an exact 200,000 shift in the Y value. Directely in the drawing, the coords are correct. They just won't attach correctly.
I can tell that this drawing was not created with the dwt we use (it is missing certain styles) - I wonder if the dwt could be to blame.
Also, I have been trying to figure the Map functions out with no guidance, I wonder if I somehow changed the attach settings to cause the shift.
AutoCAD Civil 3D 2012 Windows 7 64 bit Intel Core i5-2500K CPU @ 3.30 GHz 8.00 GB 64-bit
