I'm working with alot of overlapped x-refs and every layer for each x-ref will come in to the drawing. When I'm using the viewports I need to freeze all the layers for some x-refs that don't need to show in that viewport. Since each x-ref has well over 70 layers I am wondering if there is a simple way to freeze all the x-ref layers in the viewport.
View 3 Replies
I have an xrefernced drg , which i print from a layout/paperspace .I freeze certain layers using VPort freeze in layer properties and save the drg whenever i close and reopen the drawing the layers are thawed in the viewport again.
View 2 Replies View RelatedI'm using Autocad 2013, and im trying to freeze layers in certain viewports, but the VP freeze/thaw button is greyed out for all my layers and wont allow me to freeze anything. I dont want to use the New viewport freeze/thaw button.
View 1 Replies View RelatedIn previous versions of Autocad 2008 and earlier you could start a new drawing xref in a drawing then switch to layout and create a viewport that would show the xref. Then you could click inside that viewport and run the FL (freeze layer) command and selectively freeze layers by clicking on them.
In my current version of Autocad Civil 3D 2010, when I follow the same steps as above and run the FL (freeze layer) command inside the viewport, the entire layer contents within the viewport freeze as if everything is on that one layer.
I notice that if I pull up the layer manager box and go down the list of xref'd layers and select the freeze in viewport option for each of the layers I need to freeze it will do what I need to have done, But I'd like to be able to be able to selectively freeze these layers visually within the viewport like I've always been able to do, instead scrolling down a long list of layer names and freezing them that way.
how to do this in Civil 3D 2010?
I would like to know how to write a routine to thaw all layers in current drawing and multiple xrefs; then freeze all, then thaw only certain layers globally for a drawing that is open. Such as a dimension plan will thaw only *-BLDG, *-DIMS, *-RD-*, *BNDRY.
I would like to create one that will fit every project which has a different xref name.
Every time I open my drawing (which includes an XR ) I have to go through and freeze several layers of the XR file (mostly hatch/shading layers). When I save and reopen, these shading layers are back unfrozen again and I have to go through and freeze them.
Is there a procedure to keep individual XR shadings off after saves?
AutoCAD insists on making newly created layers visible in all previously established viewports, even when I have set the visibility to off when creating the new layer. I have found to correct the problem is by going viewport to viewport (with the layer window open), clicking within the viewport and changing the layer visibility to "off."
I would like to have a global variable for new layer viewport visibility. by default, I would turn-off all visibility of new layers in existing or new viewports. Then I could turn them on where I needed them without having to clean up after AutoCAD. This is a logical default, because if I have not previously established a layer, it is likely that I would not want/need to see that layer in most previously established viewports.
I'm having a problem setting layers in various viewports. I set them (using VP freeze), they appear to be fine, I save, yada yada, but after a while all the layers turn back on within the viewports. Very frustrating. I am starting to think that there is a fundamental problem with my layers system- possibly having to do with my profile setting, but I don't know enough about setting and managing profiles to know where to start. Or it could be something else.
View 6 Replies View RelatedI have a one drawing in MS with 5 layers.
I have 2 viewports in one layer tab from that drawing with different scales.
I want to turnoff 2 layers in one of the VP but have them turned on on the other VP.
Attached is file.
Model Space: has two objects one being a circle and one a rectangle
Paper Space: I have created two layers title "Area 1 Viewport" and "Area 2 Viewport". My goal is to get it so I can "Area 1" layer and the circle appears but when I turn it off that viewport goes away. Then when I apply "Area 2" viewport the rectangle appears but when turned off the viewport goes away. Currently the frame of the viewport is assigned to the layer but the objects still stay.
I've a problema with autocad 2014 when I start it all programs are freezing about a variable period fron 30s at 1min.
With autocad 2013 I don't has problems.
I've got a issue with working with images. I draw furniture full scale and sometimes it necessary to hard draw and scan the drawing and then attached the image in autocad and trace over the image in AutoCAD 2013. everything is fine until I attach the image, then it freezes with every move that I try to make. The images are around 700 kbs in size. Is there anything I can do or change some kind of setting?? btw. version 2004 doesn't have this problem.
I'm running windows 7 pro
Dell XPS M1710
4 gb memory
Want to know if there is a better way to have multiple north points in a drawing with out having them on their own layer
I produce drawing along the length of a road so use viewports to cover the length so when the viewports overlap I have a cut line and this often means at the end of one viewport you see the next viewports north point.
Currently I have the north point block drawn on its own layer then I end up creating 2 or 3 move layers to put the blocks on so I can freeze the new layers in different viewports hiding then from the previous if that makes sense.
Im having some problems with a file im working on. I have a file with an x-ref, when im in the model space i can see all layers i want to see, but in the viewports i created in the file i noticed that 2 layers(layers that i really need to see) dont show up. Ive checked the freeze/thaw, on/off, plot/no plot settings, layerstate, i tried creating a new layer in the x-ref file(the parent file) and putting these things that dont show in the new layer but nothing changes. I'll attach two images for the layer settings.
So, whats missing in the viewports is the cyan text where it says "Klassisk sal"and some other text surrounding it and the cyan box with the text "Mko 12.002". The highlighted layers in the layer properties window are the associated with these items
Viewport.jpg
here is the layout, the layout is active and again the two highlighted layers are the ones associated with the objects missing.
I have a drawing file with lots of layouts, some of which have multiple viewports. I want to create a new layer and use it in just a few viewports. Is there a way to set the default vpfreeze setting to frozen for new layers? That way I can just thaw it in a few viewports instead of trying to vpfreeze it in a lot.
LT, C3D 2005 - 2014
XP, Vista, 7
-Inventor 2013 SP1.1 (Issue)
-Inventor 2011 SP2 (No Issue)
Templates have been coverted up from 2011, keeping copies of the old templates in separate folders all under the same parent directory.Have 2013 mapped to the folder with updated templates located on a network drive. Total of 18 temolates including the standard templates.
Computer specs:
Win 7 Pro 64bit Service Pack 1
Intel Core 2 Quad Q6700 @ 2.66GHz
8GB Ram
NVIDIA Quadro 2000
The Issue:I start Inventor 2013 or open an .ipt/.iam ect. I now want to create a new file so I click the "New" Icon.Inventor freezes for 10-15seconds and finally shows the templates.After that if you click on any of the templates it freezes instantly. Or if you scroll the browser bar down to navigate the folder. 15-35 seconds
After selecting the correct template it freezes for about 15 seconds.For those keeping track Thats 40-65 seconds just to open a drawing...
For Inventor 2011.Click, Click, Click. Open...Takes maybe 5 seconds.
I have a few files with layouts that have multiple viewports where layers were frozen to get the desired display, the drawing was saved, yet everytime the drawing is re-opened those layers are on again. This is creating problems because I am batch plotting many drawings at once. The layers are not locked.
View 4 Replies View RelatedHere is the lisp I am attempting to use:
(defun c:ada ()(setvar "cmdecho" 0)(command "-layer" "t" "*" "on" "*" "s" "0" "f" "*" "t" "*ex_*" "t" "*all_*" "t" "rev*all*" "t" "*prop_*" "f" "*geo_*" "f" "*util_*" "t" "*grd_*" "t" "rev*grd*" "f" "*z_*" "f" "alt*" "f" "*grd_elev*" "")(command "_vplayer" "f" "*grd_elev*" "c" "t" "*grd_ada_*" "c" "" "") (setvar "cmdecho" 1))
The purpose is to show the proposed grading plan at a smaller scale so that we can give detailed grading plans to meet City Regulations per ADA codes. I understand that this can be accomplished by blocks and attributes, but when you have hundreds of spot elevations that can become cumbersome and less customizable than mtext. The large scale drawings can not have all of the spots shown or it would be too cluttered. But I want to be able to see all of my elevations when I am working in model space to ensure that all of my leaders and spots move together.
I have 2 quick questions:
1- How do I turn OFF the display of Layers in Layout viewports, but they remain ON in the Model?
2- How do I rotate a group of objects to match my orthogonal UCS?
I am in need of a LISP to freeze layers in viewports on named pages. I found the following functions to return the frozen vport, but it only returns the list of already frozen and it only works if the viewport is active; besides just listing the frozen layers isn't enough. I need to be able to supply the page/tab and a list of layers to freeze.
; by Jürg Menzi 1999(DEFUN GetFrozenLaysInVport (/ LayLst) (FOREACH memb(GetMviewInfo) (IF(= (CAR memb) 1003) (SETQ LayLst (CONS (CDR memb) LayLst)) ) ) (REVERSE LayLst))(DEFUN GetMviewInfo (/ ActVpt CurSet IDX RetVal TmpVal) (SETQIDX TActVpt (CAAR (VPORTS)) ) (IF (OR(= ActVpt 1)(= (GETVAR "TILEMODE") 1) ) (SETQ RetVal nil) (PROGN (SETQ CurSet (SSGET "X" '((0 . "VIEWPORT")))) (WHILE IDX(SETQ TmpVal (ENTGET (SSNAME CurSet 0) '("ACAD")))(IF (= (CDR (ASSOC 69 TmpVal)) ActVpt) (SETQIDX nilRetVal (CDR (ASSOC "ACAD" (CDR (ASSOC -3 TmpVal)))) ) (SETQ CurSet (SSDEL (SSNAME CurSet 0) CurSet))) ) (SETQ CurSet nil) ) ) RetVal)
Is it possible to provide the page/tab name and a list of layers as aguments to a subfunction that could either activate the viewport and freeze a list of layers, or simply freeze the layer list for the named page's/tab's corresponding vport.
Important: most of my pages/tabs contain at least two vports. The largest of the two vports is the only one I wish to change, but if the layer list is frozen on all vports (per page/tab) it will make no difference because the smaller vport only requires that layer 0 is visible.
I used pdf attach to insert a pdf into the drawing. I have a plan drawing with viewports that references the drawing file. I tried to turn off the layer in one viewport while leaving the layer turned on in another viewport but i could not get it to plot correctly. It's off in my drawing but when i go to plot its on in all viewports. What is the reason that this happens? my plan file is too large i may have to post it seppartly
View 7 Replies View Relatedwhen it comes to viewports in paperspace in 2013, due to the nature of my work i have several layout drawings all drawn on top of each other and all with ther own txt and dims etc, which again is all on top of each other making it impossible to work in model space, for this reason i work in paperspace within a viewport but now i have upgraded to 2013 while i am in mid command e.g. dimension and zoom into first point then zoom back out and in again to second point, by this time i have been kicked out of the viewport and just in paperspace so cant complete the command, doesnt always happen?
View 9 Replies View RelatedI have drawn my model and am trying to put it into viewports. I have followed the tutorials provided to the letter, but when I create the viewport nothing shows up.
View 1 Replies View RelatedOn one of my drawings which was created by someone else, the viewports don't have boxes around them. When you click on them in paperspace, it bring you into model space, and when you click on detail it opens up, but cannot expand viewport., you can't delete it. I want to expand it to bring in detail which is bigger now.
View 2 Replies View Relatedi have
Dwg A: Circle & Square is drawn in the model space and 2 Viewports in Paper Space annotating the 2 objects
Dwg B: Triangle is drawn in model space and 1 viewport in paper space annotating the triangle
i want to bring the Square detail (model and viewport with annotation) from Dwg A to Dwg B,while copying the Square and pasting it in Dwg B with the same reference points, i am having the square object over the Triangle in model space.I do not want to move the triangle since that is matched with the viewport on the paper space and annotated
i want to move the Square to a new reference (while pasting) BUT in a way to have the layout annotations matching and being asscociated with it,
Some of our drawings have the ability for the viewport view to be dragged despite the viewport being locked. Is there an alternate way to lock, or unlock a view besides the option located on the drawing tray?
We are using AutoCAD 2013
Selection of overlapping viewports,I go two overlapping viewports.The issue here that I couldn't access the model space of the small viewport. Double clicking it will access the model space of the big viewport.
View 2 Replies View RelatedSo in the last week or so, my C3D 2014 randomly decided not to copy viewports. It copies the box, but nothing in it. Plus you can't go into model space in the copied viewport. Just looks and acts like a normal rectangular polyline. But when you check the properties, it still says it is indeed a "Viewport" object.
Short of reinstalling the software, any setting that would cause this?
When hovering over this button in the layer manager the following is displayed.
"Creates a new layer and freezes it in all existing layout viewports. This button is accessible from the model tab or layout tabs".
Key words here being EXISTING and LAYOUT viewports. So I've got an existing xref attached to an existing layout and per the displayed tip this means, to me, any new layer created within the xref that has this option enabled will be frozen in all existing layouts.
Since a layout is a viewport, I assume this means the layout itself, not a viewport object used for viewing modelspace content from a layout.
Even if this means a viewport object used for viewing modelspace content, that doesn't work either, so what exactly is the point of this feature?
I have an issue when working in paper space in an active viewport. As a quick change i want to move a few items and im zoomed in to do so. Problem is, when i select some items, then pan with the 3rd button on the mouse to select more items, it deselcts all the items i previously just selected.
Is there a fix or something i need to change in options for this? In AutoCAD 2011 there is no problem, but my upgrade to 2013 has the issue and its such a pain, i've reverted to the old program.
I've been messing around with a 3D drawing trying to get it to plot properly. I have 4 viewports on the layout, and the issue is that parts of the viewport are being mysteriously chopped off, as if some great big white box is covering part of the viewport. This is definitely not an issue with printer margins - this is occuring in the middle of the page.
I've deleted all the viewports and created new ones, but the drawing is still being cut off in the same locations. 20 sheets of A3 and most of the day later.
