The purpose is to show the proposed grading plan at a smaller scale so that we can give detailed grading plans to meet City Regulations per ADA codes. I understand that this can be accomplished by blocks and attributes, but when you have hundreds of spot elevations that can become cumbersome and less customizable than mtext. The large scale drawings can not have all of the spots shown or it would be too cluttered. But I want to be able to see all of my elevations when I am working in model space to ensure that all of my leaders and spots move together.
Is there a lisp for automatically draw a pline in model space of the projection of all existing paper space viewports, without need to select one by one? It will be also interesting if the lisp automatically create a specific layer like "ProjectViewport" to draw this plines. I am working with autocad 2009.
I am in need of a LISP to freeze layers in viewports on named pages. I found the following functions to return the frozen vport, but it only returns the list of already frozen and it only works if the viewport is active; besides just listing the frozen layers isn't enough. I need to be able to supply the page/tab and a list of layers to freeze.
Is it possible to provide the page/tab name and a list of layers as aguments to a subfunction that could either activate the viewport and freeze a list of layers, or simply freeze the layer list for the named page's/tab's corresponding vport.
Important: most of my pages/tabs contain at least two vports. The largest of the two vports is the only one I wish to change, but if the layer list is frozen on all vports (per page/tab) it will make no difference because the smaller vport only requires that layer 0 is visible.
I have a problem that I cannot seem to solve. I have a drawings with a whole bunch of layout tabs that have a few viewports in each tab. One of these viewports on each layout tab is on the layer VIEWPORT. I did this so it would be easy to filter out the other viewports in the drawings. I am using the code below to change all of the viewports with the layer VIEWPORT to the Custom Scale 0.020833. This works for all of the layout tabs except the first tab. It will not for some odd reason work on the fist tab.
Any routine to re-size viewports in multiple layouts? We have to re-size viewports as they were created a little too small and are now spread across almost 1000 drawings in 18 dwg.
I need to select all the viewports in the drawing and to make some changes with them, I'm planning to select them all with ssget command. If I do that I will have one viewport for the paperspace itself in every layout. One of my question is, how to know which viewport is the paperspace itself?
Second question is, how to get the name of layout in which one is the viewport? It is important to me that the lisp is really fast, so I'm planning to do the most of stuffs with vla commands.
I'm creating a drawing set that has over 100 sheets with varying amounts of viewports on each sheet (from one to four). Each sheet is its own file, so there is only one layout per file. For each section of the drawing set, the viewports will have the same layer state.
Is there were a way to update the layerstate of each viewport through a batch LISP routine? This would save me DAYS in opening each file, importing the layer state, and restoring it for each viewport. It seems straight forward, but I have no idea where to start with batch routines.
I am trying to do some minor animation with a shaded solid model. I have tried mslide and a script... this make s very jerky, flashing animation.
I tried a lisp routine to move the object in small increments, again the motion is very flashy and slow, as it appears to struggle perhaps with the shading.
I noticed doing a move command, and moving the same object manually, dragging the object around the screen with a mouse makes for pretty smooth motion. Way better than what I was doing.... Is there a way to do this programatically?
but I have more than 150 dwg file and I should open all of dwgs one by one and setting ON/OFF for STAMP layer for every drawing and it takes so much time!
I just want to select files and LISP program set the STAMP layer to ON or OFF value.
I am running a simple script to color some layers in XRefs. I need to colour all layers in XRef files that don't have part of their name containing the characters NWP and I can do this with the line
-layer c 32 ~*|*NWP*
but then all the layers in the sheet file (not in Xrefs) also turn to 32 which I do not want. Is there some way to include an "except" statement in scripts.
I'm trying to set up an easy way to import layers from a certain dwt. file with a shortcut.
Now I found this code, which kind of works, but doesn't do the whole trick. It works with a Popup where I have to insert the dwt. file. It's also annoying that it opens this file than and I have to close it manually.
I would like to have this without any import options and automatically takes this one file always for the layers.
I have code that will set and sae a current UCS to the front of an entity, of course, depending on the viewpoint. This is so, because we need all draft lines in front of 3D solids, such as dimensions, leaders for labels, text entities and so on (the reason for not putting these entities in paper space is another discussion ).
But I'll have on of two problems on numerous occasions:
1. The user forgets all together to run the command. 2. The user will pick the wrong entity that is in the foremost position in that view.
Then I'll analyze the X, Y and Z of both the lower and upper corners, and set my UCS to whatever is proper.
Is there a "LowerCorner" and an "UpperCorner" for all entities. I can't see "VSMIN" and VSMAX" working because the elevation of the returned coordinates is always "0,0"
Is there a way to get model space to "display plot styles" through a lisp routine or a script?
i'm currently setting up a whole bunch of custom tool palettes for the company I work for and instead of the icons displaying in their actual colour (at the moment they're green, which doesn't show up very well on the light grey background), I'd rather they show in the plotstyle assigned to the individual dwg's.
call up the page setup manager (while in model space) and click modify, you can then check the radio button to "display plot styles" in the top-right corner. But when you have around 100 - 200 blocks to change, that process can be rather time consuming and cumbersome!
how i have to make something. In the attached file i've made a pipe/tube under a angle (see attachment). What i would like to have is that I get the outline/contour of the end of the pipe to a stretch flatten 2D model (see pdf attachment). Is this already a standard autocad command or lisp for this?
How can I iterate through and check the object type of all objects in model space? And... then delete them if they are certain types... like lines, circles, polylines, text, mtext, etc?
How to edit this string so that it would change ONLY XREF layers in a dwg. to color 3 bylayer, and leave all of my additional layers in the current dwg. as is.
What the require setting to enable me to lock of several layer continuously when i click the "LAYER OFF" button at the toolbar? I wish to set to be like whenever i use the "LAYER OFF" command, i can direct just continue to click several layers for it to be turn off.
I have an old routine that freezes layers that are off. I would like it to also turn off layers that are frozen. It took a while but I think I figured out how the old routine works. I was having trouble determining how the routine would know if a layer was off or not. I found if the color was a negative number that meant the layer was off (cond ((< (dxf 62 l) 0) (command "f" (dxf 2 l)))). How do I tell if the layer is frozen?
I was also wondering what the character was after the DXF code ie. (dxf 62 l). Is is a lowercase L or an upper case i and what function does it have?
Below is the old routine that freezes layers that are off.
I have the following code that works, most of the time. Actually, it works or completes itself all the time, but there is no "all encompassing" measures incorporated.
All of the reference entities, believe it or not, are on layer "0". There are also some consistent layers, that you can see in the code below. However, a user may create or even remove any layer in the reference drawing. Therefore in my current drawing, I may have layers that are not frozen in the xref.
Like i said, the following code works, but not all encompassing.
I found a lisp in an old post and I edited it alittle with my own layers to have it change to but when I use it, it doesn't deleted the extra layers. It says layer cannot be deleted. Below is part of the code that I am using, I didn't copy all of them since there are alot of layers in the lisp that I added. maybe I copied something wrong I am not sure.
I've inherited management of CAD standards. A third party developed the tool palette - mostly blocks, etc. but there are also icons to add whole series of layers to drawings. Click 'Architectural Layers' you add the architectural layers. Click 'Plumbing Layers' you add the plumbing layers. Since the original implementation, things have been changed.
I'm new to working with scripts and have played with it a little bit but my knowledge is severly lacking, I picked up script pro and have had some success batching simple commands.
What I have is a large database with differing layer convensions that I want be able to run a script that will open rename layers save and close, the layers are not of the same name but similar enough that I could set peramiters for less then a duzon layer names and catch my target then rename it to a standard, for example "A-wall exterior" to "A-WL-EXT", a simple enough command but within the database the "A-wall exterior" could be one of a duzon simmilar names.
My thought was to run the -rename la "layername" "layername" qsave script but when the original layer is not found it gets stuck untill script pro times out and fails. If there is some way to search out names and once found rename that would work.
