Photoshop 6 opens up with a huge black background. I want it gone, so that I can see my desktop in the background... that is, until I press "F" for different screen mode. How to I make it so that I have the desktop in the background in the basic screen mode without removing the options pallette?
View 1 RepliesI've just found that there is F4 shortcut to show/hide Tool Options xDOverall I've disabled "Auto Show Tool Options" option and use F4 ..
View 3 Replies View RelatedThis is a problem that has cropped up before but I'm going to simulate it.
Say in this instance I want to overlay the picture of a kitten over a ball image. I've already extracted (roughly) the background from the kitten picture. I want to use 3D to warp it to the shape of a sphere but I've still got the ball's default background colour as well. How do I hide the background colour of the ball entirely so only the, warped, image of the kitten is visible to overlay over the ball image?
When I wrap the kitten image onto a 3D sphere mesh preset I get the default background
And when I try to overlay it over the 2D ball image the background prevents correct overlaying. I want just the kitten pic
I've imported a CAD drawing with lots of lines of various shades of grey, and I'm finding it really hard to see them because my grid is pretty much the same color & there are too many gridlines (see attached image). I've tried going into the Customise UI to change the colour, but for some reason fiddling with the color settings hasn't changed anything.
View 1 Replies View RelatedThe options window will not display when typing "options" in the command line or selecting from the drop down. The options menu has to be hidden somewhere because AutoCad will not allow any other commands after typing options until I hit escape. I have tried restarting CAD and rebooting my computer with not luck.
View 9 Replies View RelatedI have been trying to cut out the attached handbag. I have used several tools, working with masks, opacities etc. Nothing really works.
View 9 Replies View Relatedhow the attached 'motion blur/shake' text effect has been done ...and how can i replicate/re-create it in PS ?
View 2 Replies View Relatedok, i have a jpeg i want to email. i click on attach and the drop down comes up, i navigate to the image i want and highlight. at this point--always in the past up until last week--a thumbnail of the image shows up in the column to the right of the name of the image, so i can make sure i'm sending the right image. suddenly, i'm no longer seeing the image to the right. (see attached).
View 4 Replies View RelatedI am a rookie so please be easy on me. I have been having a problem with entering fractions into simple text. Sometimes the fraction downsizes itself to the height of the other text, as I would like it to, and sometimes it doesn't. See example below, what am I doing wrong?
1 ¾ tall, 3 3/8 deep and 4 ½
I've installed Elements 11 and imported my pictures and also the tabs. But the result is only a list of tags, the pictures doesn't seem to have any tags attached any longer. What can I do? My previous version of Elements was the 8.
View 1 Replies View RelatedI have followed steps to share a photo using email, after I put the recipients name in and click ok it seems to freeze, (the egg timer as i would call it) doesn't move.I have to switch the computer off and restart.
View 5 Replies View RelatedI need the attached image edited so the people in the photo appear shirtless. The people in the photo needs to have an athletic build and a non-hairy body. I'm new to PhotoShop.
View 7 Replies View RelatedI saved an image attached to an email in jpg with 4000 x 2664 pixels to the organizer. Even though I designated jpg format, it was saved in png and was downsized to 150 x 100 pixels. How do I save the attachment in jpg format and not be downsized?
View 5 Replies View RelatedFIRST, when adding names, places, or events to photos, in Adobe Photoshop Organizer 8, are those tags only saved in the catalog or are they actually appended to and saved with the file? In other words, if those files are copied or moved to another computer, do they retain the information?
Second, is adding and editing tags for a JPEG type file a lossless operation, or does it deteriorate the photo quality?
Attaching a JPG to an email, says its a larger size than the original?
View 2 Replies View RelatedIs there are a way to display the attached tags for a photo in manual order, rather than how they are sorted in the keyword tag list?
When I assign tags to a photo, these are displayed in the order in which the tags are sorted in the list of tags (either alphabetically or manual).However, what I want to achieve is to display the tags for a photo in the order of i.e. the people shown on the photo.
how to achieve this?
3ds max 2014
1
I tried to add a vehicle to the resource kit (attached FBX).
Used the resource kit manager .. it almost worked .. final object did not appear, I got an emoty box where the truck was supposed to be.
2
then I tried to copy materials from an existing vehicle max, merged the 2 models in one max but could not find a way to 'copy' a material from source to target .. source appeared to be 'loacked' like a group
3
then I tried to make a copy of the toyota dyna truck - but scaled up a little (120%). Managed to scale up object but result in road model had the original scale??
Basically, the toyota dyna truck is too small. I need a real size delivery truck in Civil View or I need to be able to scale up the dyna truck. Steps on how to add a vehicle - including material settings would be useful.
Note.. in 2 and 3 .. the existing vehicles in max files, seem to be grouped somehow - what is used? How do you ungroup it? (it is not a 3ds max group)
I'm running Map 2014 SP1 on my machine and the rest of the users in our organization are running Map 2013.
If I save a drawing back to a dwg 2010 version all is fine, but if I save the same drawing to a dwg 2013 version other users are not able to activate and query from it, even though they are otherwise still able to open and work with the drawing.
I am trying to clean up our drawing database and have run across several drawings that are showing external file references with a status of 'unreferenced'. During a scan early last week of all current revisions of our drawings (about 120000) we uncovered about 7500 drawings that don't quite cut the mustard as it pertains to the use of attachments. I have written a small .NET app that scans through my drawings, but I am having difficulty with one aspect of my probing.
I need to be able to open up an AutoCAD drawing, navigate to said drawings image dictionary, get a RasterImageDef from that dictionary, and then check to see what the 'status' of that drawing is. By 'status' I mean the status as reported in the External References dialog that appears when using the command 'xref'. In particular, I want to write out/show a message when I encounter a drawing with an attachment that has a status of 'Unreferenced', which I take to mean that the drawing was attached at one point, has been unloaded, but not properly detached.
My problem is that I can't seem to get to any property that shows that status. I have used ARXDBG to snoop the database and I can verify that I see the images still in the image dictionary, but not in the drawing itself. I also can't seem to get at thte status of the attachment. To compund the matter, everytime I try to inspect the RasterImageDef object I get, AutoCAD locks up and bombs out.
I am guessing I could get at what I need via C++/ObjectARX but I don't want to go that route if I dont have to. I have attached a snippet of the code I am currently using to scan through my drawings, not perfect or even pretty, but it works.
I have some building department forms in pdf format that I have inserted into paperspace in a layout. They appear fine in layout view and in print preview.
But when I print the layout to pdf, the attached pdfs all print faded. The pdf (as an underlay) is set to fade = 0, contrast = 100. No transparency setting I can find. The layer transparency is 0 and the plot style is at 100% screening.
If I set the layout to *NOT* print transparencies, then the pdfs print dark as they should. But I sometimes use transparency for shading or poche, and would like to be able to use that and also have an inserted pdf print properly.
Is there a way to set pdf underlays to print at full density? I seem to remember finding a global setting for this once, but can't find it now.
I'm trying to create the attached two logos I drew. The top is a stand alone "A" logo with a space background inside the star and a metalic A and loop.
The second also is metalic lettering except for the s which I would like to be bright yellow at the start and fade down the underline.
I have a model, that is attached and textured. Now say, I want to update the texture, for example giving Ryu model here, a black eye, how I would go about that?
Because every time I update the texture, the entire model's texture changes. I have added some images to see what I mean.
Rig: Intel Core Quad CPU Q6600 @ 2.40GHZ
8gb RAM
64bit OS
GeForce 660i GTX
3DS Max 2013
How do I get the toolbox and the layer window attached to the main window? Right now they're hidden behind the main window and it's extremely annoying since I like to have the main window maximized.
View 2 Replies View RelatedI am trying to view questions here and you know the "attached files'' that you have to click on in order to view? I am unable to open them. Instead of it opening it downloads a blank icon on my desktop. I tried with different browsers and the same problem.
View 7 Replies View RelatedWhere to start creating a figure similar to the attached image.
I'm trying to recreate a logo for someone who lost their original files and I'm struggling to create this little 'stick-figure'. Is CS6 the best place to try this or would I be best looking at an different software.
how to snap such as the attached image? URL....
View 24 Replies View RelatedI keep running into this issue in InDesign. I never notice the issue until I go to package it, but I will outline all of my fonts, and when I go to the packaging screen it will say I still have 1 font in the document. It is always Minion Pro (the default). After investigating further, it always seems as if a text field has been "attached" to a shape. Once I delete the shape, when I go to package it it says there are 0 fonts.
So this causes all sorts of problems when I'm packaging because I can't outline the "minion" font because its not actually there (I've tried selecting the shape and clicking outline, but it wont let me). Also the only way around this I have is to delete the shape, and completely rebuild it (which is impratical for many reasons).
how to delete the type? (I have also tried Type on Path > Delete and its greyed out and won't let me choose that option)
I have an access database attached to a blank drawing. The database is a list of existing oil wells. I want to have civil3d (or map) create a custom block (I already have the blocks created) inserted at a coordinate in the database and propagate the other fields in the database into attributes in the blocks. For instance, the first two fields in the database are the x and y. Some of the other fields in the database are the well status and company name. Is it possible for Map to read the first two fields to know where to put the block, then select the block to insert based on wells status and company name, and then complete attributes from the other fields (section, township, range, county, etc) into the block? I'm having a hard time getting my head wrapped around the map3d user's guide talking about topologies, link templates, object classifications, etc. Using Civil3D 2013 infrastructure design suite, Win 7 64-bit, office 64-bit.
Dell Precision T3600 - Windows 7 64-bit
NVIDIA Quadro 600
Intel(R) Xenon(R) CPU E5-1607 0 @ 3.00GHz 3.00GHz
8 GB ram - Two 1TB raid
Is there any way to change the names of attached images? I have many drawings that thas about 10 images attached to each drawing; I have to change the name of images and I would like to assign these renamed images to the images attached to the drawing. Is there any way? Or will I have to detach the images and then attach them again?
View 1 Replies View RelatedI have an access database attached to a blank drawing. The database is a list of existing oil wells. I want to have civil3d (or map) create a custom block (I already have the blocks created) inserted at a coordinate in the database and propagate the other fields in the database into attributes in the blocks. For instance, the first two fields in the database are the x and y. Some of the other fields in the database are the well status and company name. Is it possible for Map to read the first two fields to know where to put the block, then select the block to insert based on wells status and company name, and then complete attributes from the other fields (section, township, range, county, etc) into the block? I'm having a hard time getting my head wrapped around the map3d user's guide talking about topologies, link templates, object classifications, etc.
Dell Precision T3600 - Windows 7 64-bit
NVIDIA Quadro 600
Intel(R) Xenon(R) CPU E5-1607 0 @ 3.00GHz 3.00GHz
8 GB ram - Two 1TB raid
Updating the attached dwg (Xref),The file Q1 is attached to the file Q5 (attached). Edits are applied to the Q1. These edits are not transferred to the Q5 despite the fact that the “regenerate” button is pressed.
What might be the issue here? How the edits on the Xref files are reflected directly to where they are attached?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.