I am a rookie so please be easy on me. I have been having a problem with entering fractions into simple text. Sometimes the fraction downsizes itself to the height of the other text, as I would like it to, and sometimes it doesn't. See example below, what am I doing wrong?
1 ¾” tall, 3 3/8” deep and 4 ½”
How do I set it so that when I type fractions in a text box it automatically keeps them as non-stacked fractions rather than horizontally or diagonally stacked?
View 2 Replies View RelatedWhen using RomanS, how do you stack fractions in single line text? AutoCad will do it automatically in multiline text but I am having trouble in single line text.
View 5 Replies View RelatedI'm trying to use diagnol fractions in my label text for 1/2 and 1/4 deltas. It displays and seems to work fine in Autocad, but when I plot, the numbers have trouble displaying themselves.
I'm using a light color from our .ctb, so I thought that was the problem, but that doesn't seem to be the case (I tried two heavier lineweights and it only got worse). Increasing the percentage size of the fraction also has no effect.
how the attached 'motion blur/shake' text effect has been done ...and how can i replicate/re-create it in PS ?
View 2 Replies View RelatedI'm preparing plans for individual land owners. I know I need to filter parcels "by hand", center, zoom, scale etc. I'm using labels to get parcels numbers on the plan but I have to add name into title block. I don't want to use feature labels because concat function does not work (I need to show parcel number) plus the name I need to put on is quite long (it doesn't fit in the drawing).
My question is: Is there a way to put text into drawing / title block from attached table or from feature properties of shp or sdf files?
I am attaching text to a path, but on the bottom of the ellipse, the text is upside down in relation to the text at the top of the ellipse. I am going nuts to try and resolve this. I have CD6 The Official Guide at my side, and no luck.
View 6 Replies View RelatedI would like to create an dynamic block to a level symbol, with a parameter that aligns the length of the line under the text with the text end.
I attached an jpg image with an example.
I thing the key element is to create an point that is attached to the end of the text and apply an stretch to it, but I didn't succeed.
I'm trying to copy editable text from a Word file into the text editor for GIMP. Before I upgraded to 2.8, this was possible, but now it seems not. I'm on 2.8.4 using OSX Mavericks on a Macbook Pro.
I'm a terrible speller and since GIMP doesn't support spell check, this was always my workaround.
i am trying to create a drop shadow on text. i select the text and then copy and then paste in back. however, the copy shows up way above the text and not behind it. what am i doing wrong?
View 2 Replies View RelatedIn the last 2 days Corel has decided to start changing Artistic Text to Paragraph Text when I copy & paste it across documents, completely changing the font, size & colour of what I am copying.
I've just done a factory reset & it's still doing it.
Â
I don't recall doing anything that would change a setting.
The text I am copy & pasting are disclaimers that are all set on 1 document & I copy & paste them to a proof as needed.
I was entering some notes, with fractions, in a M text window. The popup that opens when entering fractions asking how you want to display the fractions. I accidentally turned it off, how do I get it back?
View 2 Replies View RelatedWhen I am typing out text and get to a fraction is allows me to stack it diagonally so the 1/4" looks nicer. When i dimension, however, it does not seem to stack the fractions the same way. I took a look at the Format - Dimension setting and did not see the option in there to change it. I would like to have the fractions stack diagonally like they do regular text.
View 1 Replies View RelatedI teach 8th grade tech and we use inventor I needed to display in fractions went to help menu. told me to go to styles & standards and then to styles editor as the help menu says and in the dialog box on the right is the browser it has in it color, lighting, & material. the help menu says there should be dimension to change the style to fraction but it not there.
View 9 Replies View RelatedMy Inventor's playing with me... When I use Leader text and type a fraction, a message box pops up asking me if I want to stack the fractions. I don't, which has always been the default, so I just hit "Enter". Suddenly, it's decided to go ahead and stack them, and now the box does not come up, so I can't tell it not to. Where do I choke it to get it back to not stacking the fractions, or at least give me the option box?? R2010, S.P.0.
View 4 Replies View RelatedDetermine the roof pitch, then it has the typical triangle with 1/2 pitch and 1/4, 1/3, 1/6 and so on. I know rise over run like 5/12, but don't understand the fractions. How do I get 4/12 or 5/12 and so on from the fractions?
View 4 Replies View RelatedWhere do I go in Autocad 2000 to change from decimal dimensions to fractional dimensions.
View 4 Replies View RelatedI am not able to copy and paste text from non-Adobe programs (like Keynote or Word) into Photoshop CS6. I get an error message reading "Could not complete the Paste Text command because the clipboard data is empty or invalid." I have tried shutting down Photoshop, shutting down other programs, re-starting my computer, adjusting my Preferences and asking Adobe by phone and chat. I am on a new iMac and have no third party plug-ins installed.
View 3 Replies View Relatedi use ps6. if i copy text from any program into a photoshop textbox it says "files empty/invalid" even if i open a new textbox or a new photoshop document. that only happens in photoshop, not in any other program. is there something wrong in the settings?
View 3 Replies View RelatedI am trying to do something but it doesnt seem to work.
I have made a background paper in Photoshop. I want to copy a text from a word document and paste it into the paper in PS.
I have tried several things, but nothing works. Then I tried to make the paper a png, and insert it into word to copy in the text there instead, and I couldnt get that to work either.
Iv written text in a word document and copied and pasted it onto a background in photoshop. Now i have a problem because when i dropped the text into PS it said it had rendered the text it and now i cant change any of the text i can add to it but i cant change words that iv either miss spelt or need to remove from the text.
View 1 Replies View RelatedThe bottom of a diagonally stacked fraction in Mtext aligns to the baseline of the string, which pushes the number with a fraction upward, which looks bad- see attached. Can this be corrected?
View 2 Replies View RelatedI can't figure out how to get my levels to show fractions of inches. I can add a dimension from level to level and see the fraction, but the level itself insists on rounding to nearest inch. View scale makes no difference.
View 2 Replies View RelatedI am presently working on a P&ID drawing and there are numerous small size pipes, valves and reducers and I would like to use vertical stacked fraction. I am presently emptying the attribute and putting a Mtext in its place. It is slow and troublesome.
How to get Mtext into the block editor so I can use it instead of single line text when I am creating block attributes?
I have to draw this:
[URL]......
But I can't understand how to draw the lines with that measure in fractions. I have my units set in "Architecture : Inches".
For example, in the right line that is: 9'-11 7/8''
What I do is, start the line command, click anywhere on the gril (because it doesn't say where start... so I guess you could click anywhere, although I am not sure about that either). And then I put, @9
I would like to create a fraction with illustrator in one of my drawings but I can't seem to be able to do it.
Â
I went on the internet to see how I could do it and I learned that I should write my fraction like  text1/text2 then go to the OpenType panel and select fractions.
Â
Somehow when I select my fraction and go to the OpenType panel none of the possible options are available. They are writen in a pale color and inaccessible. How do I do to make those options available? Do i need some kind of add-on?
Photoshop 6 Randomly changes text when I'm trying to make changes to the copy.
View 9 Replies View RelatedI am trying to find a way to copy a text layer in one image to another image of the same size so that the text layer is in the exact same location.
Basically I have two images for a rollover button for a website. What is the easiest way to copy a text layer to the other image so that it will be in the exact same location to create the rollover effect?
How to copy the text from one image to another image. in Photoshop 12
View 1 Replies View RelatedI have a keyboard shortcut for Copy (see directly below). This command doesn't copy multiple. But if I type "Copy" at the comment prompt (AutoCAD 2013) the copy multiple is the default. Copymode is already set to "0".
(DEFUN C:C()
(setvar "SNAPMODE" 1)(COMMAND "_COPY")
(PRIN1)
)
I have been working 4-weeks for a new customer. I Run Inventor 2011 mechanical... I have multiple iwd files that have all been done in decimals. The floor workers here want fractions to the 1/32. Is there a easy way to up-date my entire list of drawings with out creating new? Is there a easy way to create a style that I can easily switch to when I draw/design for this customer. I hate fractions!
View 5 Replies View Related