Iv written text in a word document and copied and pasted it onto a background in photoshop. Now i have a problem because when i dropped the text into PS it said it had rendered the text it and now i cant change any of the text i can add to it but i cant change words that iv either miss spelt or need to remove from the text.
View 1 RepliesI am having an issue copy and pasting text. Whenever I copy text from a source (word, another dwg) and paste it into a new dwg, it all comes in uppercase. Also everything i type in a new MTEXT is all caps.I do not have caps lock on.
View 2 Replies View RelatedWhenever I copy/paste a selection, it 'fades' away the edges, giving it a softer look. I'd like to paste exactly what I copied, the entire edge.
View 3 Replies View Relatedhow to copy and paste a portion of a document open in photoshop into another document that is open in photoshop?
i have never been able to figure this out despite trying to do it from time to time and i basically cannot figure out if this is dependent upon actual images size, resolution, the size that the various images are on the screen etcetera, etcetera.
i am not even sure what other questions to ask except that i guess i could avoid all of this if i could copy a section of an image and then paste it into another document in a way that would give me the ability to RESIZE the incoming paste.
i basically want to get a logo into another document in a way that i can size and orient it so it looks good graphically...
trying to copy txt from an outside text editor and pasting them into an open, editable text layer in my workspace. The problem is that I can COPY the text fine, but when I click over to PS to paste it into the open editable text layer it either pastes the previous text from my clipboard OR it won't paste anything at all. I can then go into any other text field on a browser, spreadsheet document, a different text editor, notepad, etc and successfully paste the proper batch of text I wanted to paste into PS. Sometimes I have some rather large files open 50+megs when I notice this happen. I have to save my work and close out entirely of PS and then open it again before I can begin editing my original document again and successfully paste the text into the open editable text layer. This may last for a few COPY/PASTE sessions of additional text in additional text layers, but then begins displaying the symptoms I described above.
I am on Win7 on an AlienWare M17XR3 laptop with 16G RAM and AMD Radeon HD 6900M Series display adapter.I assume it's either in my PS performance settings which I have PS using 10413MB RAM and has over 350G scratch disk space. If it's not that I guess my laptop system performance settings which I've never tinkered with since I purchased it.
Every time I try to copy an image (with a transparent BG) and paste it into my overall project I'm working on, both opened in GIMP, I always get just the selected dotted lines as an outline of the image.
View 3 Replies View RelatedIn the overlay & sensor coverage file I have created some blocks. all the sensor coverage have dashed lines.
However, when I paste them into another document they partially dissapear and the dashed lines turn solid.
When I cut and paste, Autocad lags for up to 30 seconds before continuing to go back to the command prompt. This problem only happens after pasting, whether it is one line or multiple lines/objects. The quantity of data pasted makes no difference to the lag. Also, if it's a new file with nothing in the drawing the issue still happens. The scale list is purged along with the entire drawing, so even on a blank new file it happens?!
I am running autocad 2014 LT and migrated from 2010 recently, where the problem began. I don't have cutting and pasting problems in any other programs like photoshop either, so I have localised it to a cad being the issue.
Also I have tried uninstalling and reinstalling, but this doesn't fix the problem.
I'm running on intel core duo 2, 4gb ram and 64 bit operating windows system.
I have not done this for a while, but I remember you have to click somewhere otherwise all you see is an empty viewport in the new drawing.
View 2 Replies View RelatedURL....My logo on the file that i created it in looks perfect. When i create a new, blank AI file and paste it into it, it pastes as a faded version of my logo. I have gone through all the settings i could find between my two files and made them identical, it still happens. When i paste the logo into the same file it was created in it pastes correctly.
View 20 Replies View RelatedI am copy clipping some objects, and then pasting them back into the drawing as a block. At first everything worked fine, now when I perform that routine, and paste back into the drawing, it inserts it way off in left field. What parameter did I upset now?
View 1 Replies View RelatedIs there a setting to change the text frame size when pasting a block of text?
For example if text is pasted into a blank page with the either the pick or text tool active the text frame on each page is 8.3"x10.8" on a 8.5"x11" page. the same on each succeeding page until the text is less than a full page.
I would like to set the text frame at 7.5"x10" for pasting in text when the text will need unknown number of pages.
The problem just came today while i tried to copy/paste text from Ms Word. As I usually do it asks me about formatting options before pasting text but today its not working the way it should. It simply pastes plain text without all formatting I did to my document in Ms Word. I even tried to repair my software but nothing worked.
View 1 Replies View RelatedIs there a setting to change the text frame size when pasting a block of text?
For example if text is pasted into a blank page with the either the pick or text tool active the text frame on each page is 8.3"x10.8" on a 8.5"x11" page. the same on each succeeding page until the text is less than a full page.
I would like to set the text frame at 7.5"x10" for pasting in text when the text will need unknown number of pages.
Illustrator CC, Mac OS 10.8.4 : When pasting text formatted with a Paragraph Style, the style drops off and the text converts to Myriad. I am copying and pasting from/into the same file - even into the same text box.
View 7 Replies View RelatedI'm having a weird problem with pasting text into Photoshop. It had been working fine until today. Here is how I usually do it (and it won't work now):
Copy text from email or web page into basic text editor. Make any changes necessary.
Copy text from text editor.
Paste into Photoshop text field.
Today when I try to paste the text into Photoshop nothing happens. It pastes fine into other programs such as Illustrator (and even this form.) And it will copy and paste from Illustrator to Photoshop (though it comes through styled which is not what I want.)
I've run my usual repair programs but that didn't clear up the problem. how to fix this?
Adobe Photoshop 5.5
Mac Pro w/OS X 10.6.8
Today Illustrator CS4 decided to start crashing on me when I try to paste text into the art board. It will also not allow me to type text into the artboard. Whenever I try to type, it just does all the tool shortcuts. I have alread tried deleting the preferences and that hasn't worked at all.
View 1 Replies View RelatedI have 2 layers of text in a .psd that I want to simply copy and paste into another .psd. I select both layers and link them together, though when I copy and paste into the other .psd only one of the layers is pasted. How do you do this?
View 1 Replies View RelatedIm running Photoshop and Illustrator CS on a G5 with os X and ever since I've installed them I've been unable to copy and paste text from illustrator without converting to outlines.
I get an "operation cannot complete because of an unknown error" message
I've been using CorelDraw X3 for a while now and whenever I have copied and pasted artistic text is has simply pasted over itself in the same place for me to move wherever I want to.
Yesterday I copied some artistic text and when I hit paste it pasted as paragraph text, in a different size and font and in the center of the page. Have I accidentally and unawares changed a setting?I know I can get around this by duplicating instead of pasting but it is frustrating as it is a feature I use constantly.
I am trying to copy and paste text in Photoshop CS6 and I am losing the oh-so-valuable formatting. I am referring to two boxes side by side in Photoshop that contain text.
I love the text in the first box, but when I try to duplicate the formatting in the second box right next to it, the text looks completely different. And, when I try to just paste some of the text from the first box to the second box, the 20 px text suddenly becomes 96.3 px text.
Even though I go through all of the formatting options available and duplicate what was in the first box, the text in the second box ends up looking nothing like the first box even though they contain exactly the same formatting, font type - everything.
This has been an issue for me for a while, not just in CS6. When copying text from Photoshop into Illustrator the font comes through but the size is always about 4 times what it was in Photoshop. Both documents are set to the same dpi. I don't understand where it's getting this arbitrary size info from. Any trick to get the size to come though correctly?
View 11 Replies View RelatedI'm looking for a way to be able to copy text from another program (Microsoft Word) and then, using the Text tool in Photoshop (CS6), paste that text, but where it retains the correct italics formatting I had in the other program--and not as an image of text (Ctrl+P), in which the formatting is present, as a flat image, but rather as an actual unpasteurized and editable Text layer.
For example, the sentence “I told you..” where 'told' is italics, simply pastes into Photoshop as "I told you.." without the original formatting. Is there a way to get Photoshop to recognize formatting from pastes without my having to manually re-apply the formatting myself? This would be a hassle over a long period of time. If necessary I would be willing to use a plug-in that allows for this sort of recognition.
In Video Studio X3, it seems impossible to paste text copied from another program onto a Title page. I want to do this since I have 16 stanzas of poetry that I want to insert, each on its own page, or story board.
If in fact I cannot paste text, is there a format that I can use to save each stanza on a page separately in another program that I can import into one part of this program? Maybe in a particular file extension as a snapshot, video, etc.?
It would seem ridiculous to not be able to import a text document. Do I have to type everything out from scratch?
I'm running CS6 16.2.1. When I copy some colored text it is persistently pasting in black. I've restarted CS6. I'm on a brand new iMac and have opened CS6 for the first time so I know the prefs are brand spanking new. I'm not running any clipboard managers either.
View 2 Replies View Relatedi'm making a newsletter in which there are pages which has to written in malayalam. i use charmap (Start>Run>Charmap). in that i make a sentence by selecting each letters.. Charmap has its own text field where the written text is displayed. from that text field i've to copy paste it to corel draw's text field.
Now the problem is whenever i paste it on corel draw's text field, the letters come a bit jumbled up. i've noticed that the vowels get jumbled up. but when i paste it on ms word, it comes as it is.
I am using the copy and paste clipboard option to bring text into my drawing. The text was annotative at one scale and brought into a new dwg (model space) which had a different annotative scale. When I brought the text in, it came in too small, so I scaled it properly. It did not appear in the paperspace viewport, even thought it was there in model space. I did a properties on the text and it did not allow me to change the texts annotative scale.
View 2 Replies View RelatedSince upgrading to Illustrator CC, I've noticed a strange issue (on Mavericks). When I copy and paste text (within the same Illustrator doc) Illustrator ignores the colour of the original text andwill always pastes the text as black.
How to get Illustrator to paste the original colour or turn this behavior off?
I'm trying to paste in things like "N.G.", "Top of Bank", "Edge of Water" all at certain points to annotate the topography. I've tried the following:
text N.G 800,90
text Top of Bank 820,90
But I keep getting the prompt for annotation angle and it gets stuck there so I tried:
text N.G 800,90 90
text Top of Bank 820,90 90
But the same thing occurs. I need the text to be vertical. I've done some searching here, but haven't come up with much. I don't want to resort to creating blocks and importing the attributes as I'm sure it's much easier than that.
Encountered a bug when copying and pasting text from one text box to another? It seems to paste more text than I originally selected. I am on Mac OS X 10.6.8 and my AI is 16.0.4.
View 1 Replies View RelatedWhat is the cause of text that I copy and paste not retaining the colors it had? I have many text blocks with large numbers and letters each having their own color and when I copy them in order to paste them elsewhere, the letters/numbers have different colors. For example all numbers that may have been pink are now black.
View 6 Replies View Related