Photoshop :: Copy/pasting
May 26, 2009Whenever I copy/paste a selection, it 'fades' away the edges, giving it a softer look. I'd like to paste exactly what I copied, the entire edge.
View 3 Replies
ADVERTISEMENT
Photoshop :: Copy And Pasting Text
Nov 30, 2008Iv written text in a word document and copied and pasted it onto a background in photoshop. Now i have a problem because when i dropped the text into PS it said it had rendered the text it and now i cant change any of the text i can add to it but i cant change words that iv either miss spelt or need to remove from the text.
View 1 Replies View RelatedPhotoshop :: Copy And Pasting At Actual Size
Jan 13, 2013how to copy and paste a portion of a document open in photoshop into another document that is open in photoshop?
i have never been able to figure this out despite trying to do it from time to time and i basically cannot figure out if this is dependent upon actual images size, resolution, the size that the various images are on the screen etcetera, etcetera.
i am not even sure what other questions to ask except that i guess i could avoid all of this if i could copy a section of an image and then paste it into another document in a way that would give me the ability to RESIZE the incoming paste.
i basically want to get a logo into another document in a way that i can size and orient it so it looks good graphically...
GIMP :: Copy / Pasting One Image Into Another
Feb 18, 2011Every time I try to copy an image (with a transparent BG) and paste it into my overall project I'm working on, both opened in GIMP, I always get just the selected dotted lines as an outline of the image.
View 3 Replies View RelatedAutoCad :: Disappearing Blocks When Copy Pasting To Another DWG?
Jun 19, 2013In the overlay & sensor coverage file I have created some blocks. all the sensor coverage have dashed lines.
However, when I paste them into another document they partially dissapear and the dashed lines turn solid.
AutoCad :: Slow Response After Copy And Pasting?
Jul 31, 2013When I cut and paste, Autocad lags for up to 30 seconds before continuing to go back to the command prompt. This problem only happens after pasting, whether it is one line or multiple lines/objects. The quantity of data pasted makes no difference to the lag. Also, if it's a new file with nothing in the drawing the issue still happens. The scale list is purged along with the entire drawing, so even on a blank new file it happens?!
I am running autocad 2014 LT and migrated from 2010 recently, where the problem began. I don't have cutting and pasting problems in any other programs like photoshop either, so I have localised it to a cad being the issue.
Also I have tried uninstalling and reinstalling, but this doesn't fix the problem.
I'm running on intel core duo 2, 4gb ram and 64 bit operating windows system.
AutoCAD Civil 3D :: Copy / Pasting Viewports From One Drawing To Another?
Jun 25, 2013I have not done this for a while, but I remember you have to click somewhere otherwise all you see is an empty viewport in the new drawing.
View 2 Replies View RelatedIllustrator :: Logo Fading When Copy / Pasting For No Reason
Dec 27, 2012URL....My logo on the file that i created it in looks perfect. When i create a new, blank AI file and paste it into it, it pastes as a faded version of my logo. I have gone through all the settings i could find between my two files and made them identical, it still happens. When i paste the logo into the same file it was created in it pastes correctly.
View 20 Replies View RelatedAutoCAD Civil 3D :: Automatic Capitalization - Copy And Pasting Text
Dec 7, 2012I am having an issue copy and pasting text. Whenever I copy text from a source (word, another dwg) and paste it into a new dwg, it all comes in uppercase. Also everything i type in a new MTEXT is all caps.I do not have caps lock on.
View 2 Replies View RelatedAutoCAD 2010 :: Copy Clipping Object Then Pasting It As Block Sends It Off Into Space?
Sep 7, 2012I am copy clipping some objects, and then pasting them back into the drawing as a block. At first everything worked fine, now when I perform that routine, and paste back into the drawing, it inserts it way off in left field. What parameter did I upset now?
View 1 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Copy Shortcut C Doesn't Copy Multiple But Typing In COPY Does
Aug 23, 2013I have a keyboard shortcut for Copy (see directly below). This command doesn't copy multiple. But if I type "Copy" at the comment prompt (AutoCAD 2013) the copy multiple is the default. Copymode is already set to "0".
(DEFUN C:C()
(setvar "SNAPMODE" 1)(COMMAND "_COPY")
(PRIN1)
)
Photoshop :: Apply Same (color) Changes From Copy To Original Image Or Another Copy
Aug 26, 2013For this example let's take in account that I have 2 identical in every aspect copies (meaning size and content at this point) of the very same image.
1st remains unedited,
2nd is edited only as far as concerning the image > adjustments menu through changing mostly channel mixer, selective color, saturation etc values and had an object attached to it atop of the original depiction before being edited as a whole.
What I want to do is to edit the 1st image, compare in some certain ways the colors of it I guess with the ones of the 2nd, match for instance where color hex value X (and horizontal/vertical X,Y coords - is it needed in order to be more precise and avoid mistakes?) (I guess again) from the 1st image is edited into color (or even additional settings atop of that?) hex value Z, do that automatically for all the combinations and immediately apply the same changes I applied from 2nd pic when unedited (and looked exactly like 1st pic) to the very same 2nd pic in start, TO the 1st pic in the present case. Also in order to do this "color matching" before applied or not I need to set out-seperate the area where I have added an additional object in the 2nd picture and fill it possibly with the original content from the 1st(can it be done in one move) in order for the process to be complete?
That means I turned the 2nd image into a combination of blue-green-red colour (and other) from orange-yellow-cyan (just an example) I want to do the very same to my 1st pic which is orange-yellow-cyan etc.
Photoshop :: Pasting
Jul 17, 2008Everytime I copy and paste from one image into another, all I seem to get is a big white area the same shape as the image I tried to paste. Where am I going wrong?
View 1 Replies View RelatedPhotoshop :: Will Hard Copy Key Work With Downloaded Copy
Jan 30, 2013I'm upgrading to a Zenbook which has no optical drive so I won't be able to install PS via the disk that I purchased a couple years ago. Would the key from my hard copy work with a downloaded copy of PS?
View 1 Replies View RelatedPhotoshop :: Pasting Text - Nothing Happens
Apr 9, 2012I'm having a weird problem with pasting text into Photoshop. It had been working fine until today. Here is how I usually do it (and it won't work now):
Copy text from email or web page into basic text editor. Make any changes necessary.
Copy text from text editor.
Paste into Photoshop text field.
Today when I try to paste the text into Photoshop nothing happens. It pastes fine into other programs such as Illustrator (and even this form.) And it will copy and paste from Illustrator to Photoshop (though it comes through styled which is not what I want.)
I've run my usual repair programs but that didn't clear up the problem. how to fix this?
Adobe Photoshop 5.5
Mac Pro w/OS X 10.6.8
Photoshop :: CS6 (Ask When Pasting) Not Working?
Jul 18, 2012I have "Ask When Pasting" checked in Color Settings, but I just realized that images are being converted without asking. Is this a bug in CS6? not maybe there is something wrong with my preferences? I have to rebuild a document because the base image was an FPO in sRGB that I forgot to convert to my CMYK space. Usually I would be asked if I want to convert when I drag a new layer over which would catch my mistake.
I tried resetting the dialog by going to Prefences>General>Reset all warning dialogs, which didn't fix it. Howerver, I'm not sure that the reset in Gereral Preferences also affects the Color Settings preferences.I also tried closing PS and throwing out Color Settings.csf from my User Preferences. This didn't fix it either. I've never had Color Settings go bad, so I'm not 100% sure this is the right file to remove.
I first saw this when my base document was in sRGB and the layer I dragged over was in "Web Coated SWOP 2006 Grade 3 Paper". I just tried it in the opposite direction with the same results.Photoshop CS6 Extended, Version 13.0 x64. Mac OS10.7.4. 17" MacBook Pro 2.5 GHz Quad Core i7, 16GB ram.
Photoshop :: Pasting Into PS Using Charmap.exe
Feb 7, 2006I'm using a font called WoD (World of Darkness) - it's basically a dingbat font. I'm using Charmap to copy the icon I need - its number is Alt + 0162 or 0xA2. When I paste into Word or Wordpad, the icon comes up correctly. When I try and paste it into Photoshop (CS2), it comes up as the same character as 0x3F.
The pasting fails whether or not I have NumLock on, and the same character (3F) comes up when I try to copy/paste or type (using Alt) any character greater than Alt + 0128.
Photoshop :: Simple Pasting
Aug 10, 2004I want to hilite an area in a layer to copy and then PASTE into that EXACT same layer, (preferably with the MOVE tool selected so that I can then move that new pasted selection around), is there a way to do this?
The only PASTE commands I see are PASTE (which pastes AS NEW IMAGE) and PASTE INTO (which does I DONT KNOW WHAT!) Some kinda paste to new layer and auto create a mask
Photoshop :: Pasting Quickmask
May 26, 2007When I use Quick Mask for masking an area that I want to copy and paste, then go to standard edit mode, I see the marching ants, so far so good, except when I paste the Image into another image it's looks too be about 25% transparent.
If I use lasso tool too do same thing, no problem, no
transparency..
What's happening? I've reloaded the program twice now,
problem still exists.
Photoshop :: Pasting Into CS5 / Auto Resize?
Jan 13, 2012We copy a lot of existing elements from illustrator files into existing Photoshop documents. The dimensions of the Illustrator files are much larger, so we've always pasted into Photoshop and it resizes to the smaller photoshop document.
When I paste into the existing Photoshop document in CS5, I need the image/object to resize to my Photoshop document, instead of pasting in at the actual/original size.
Is there something I can change in preferences? Or a way to do this?
Photoshop :: Pasting From Illustrator To The Center Of CS5.5
Jul 2, 2012I have an illustrator file (various circles and half circles) built with various layers, I would like to copy and past these layers into Photoshop and change them to a shape layer, but when copying each layer and pasting the vector falls in slightly different place to the illustrator file, how can I keep the position the same as the illustrator?
View 6 Replies View RelatedPhotoshop :: Copying And Pasting Text From One PSD Into Another
Sep 20, 2012I have 2 layers of text in a .psd that I want to simply copy and paste into another .psd. I select both layers and link them together, though when I copy and paste into the other .psd only one of the layers is pasted. How do you do this?
View 1 Replies View RelatedPhotoshop :: CS6 / Pasting Shapes From Illustrator?
May 15, 2012[Photoshop + Illustrator CS4]
I am trying to paste 3 shapes from Illustrator into Photoshop. The shapes are layered; I need them to be separate layers in PS. I am copying the shapes from AI and pasting into PS as separate Shape layers. The problem is that when I paste the shape layers, the position in which they land on the canvas is not consistent... they don't line up properly. This means I will have to manual reposition the shapes in Photoshop?
(as a side note, I'm baffled that there is not way to export my AI document as a PSD, and retain the layers as vector shapes... exporting to PSD requires I rasterize the artwork. Has this been added to CS6?)
Photoshop :: Pasting Settings Between Pictures
May 12, 2011I have two photos which are of roughly the same scene but taken under slightly different lighting conditions.
I'll use a MS Word analogy to try and explain what I'm after - in Word, I can select some text and copy it. I can then move within Word to a completely different document and select Paste Special and just paste the format of the text. The result will be that I have different text but in the exact same size/font/colour. What I'm trying to achieve is some way of sampling the exposure settings (eyedropper?) of picture 1 and then pasting these settings back into picture 2 so that the green of the grass and the blue of the sky are similar in both.
Photoshop :: Pasting Transparency On A Photo?
Feb 13, 2013Someone has made me a transparent logo (.png) to include on a picture but I cannot for the life of me work out how to do it. how to do this?
View 3 Replies View RelatedPhotoshop :: Pasting Black From Illustrator
Jun 13, 2012This issue seems to be still an issue, I upgraded from CS3 to CS6.
If I open Illustrator, and create a box, solid black.
Open up a new PSD, and paste that box into photoshop.
The black box in photoshop is now dark gray.
Photoshop :: Pasting Into Existing Layer?
Jun 13, 2006I've got a Photoshop file that someone wants me to use as a template. It has an existing layer that I need to put a picture into without modifying the layer or creating a new one.
Whenever I cut and paste a picture into it, the pasted picture becomes "Layer 1" but I want it to paste onto a layer which is already there (rather than become a new layer).
Photoshop :: Copying And Pasting Between Images
Sep 11, 2004I'm a PS newbie, and I've been trying to copy a selection from one image and paste it in another. This normally works perfectly, but I've been having real problems with one image. Whenever I copy something onto it (with most pics, at least; haven't tried them all) the copied selection loses all colour and texture and becomes an apparently random selection of white and black pixels.
Is there a setting somewhere that I should change? Are the images just incompatible? Please help.
Here's an example screenshot. Request any further information you want and I'll try to provide it.
Edit: In case you couldn't tell, I'm trying to copy the stick on the right onto the witch.
Photoshop :: Copying And Pasting On An Image
Feb 12, 2009how do i copy an image and paste it on another image on photoshop cs4? i have already used the pen tool on the pic i need to copy but i cant seem to copy and paste it on the other picture.
View 6 Replies View RelatedPhotoshop :: Oddities About Pasting Images
Apr 24, 2004lets say there is this image, and I want to make a selection. That selection, I want to quicky turn into a new image. So, the way I did it was:
1. Press S.
2. Drag Selection.
3. Press CTRL+C.
4. Goto FILE > NEW
5. Create 1x1 image.
6. With new image selected, press CTRL+V to paste it into image (auto fits)
In Paintshop Pro, all you had to do was:
1. Press S.
2. Drag Selection.
3. Press CTRL+C.
4. Press CTRL+V.
(CTRL+V would "PASTE AS NEW IMAGE") Which worked perfect. And in PSP CTRL+E would "PASTE INTO CURRENT IMAGE / SELECTION", which seems to be the current CTRL+V function for PS.
Am I taking too many steps here? Is there a way to do this more like the PSP way?
Another short example, I had text that I wanted to manually adjust the kerning. I had to:
1. Press L (for Lasso)
2. Dragg Selection
3. Instead of the Click-Holding inside this new selection to move the contents over, PS moves the SELECTION over. I tried ALT, CTRL and SHIFT variants but they don't move the selection's contents like I'd want. So I press M (for Move).
4. Move the item.
5. Goto Step 1 for each of the letters I want to move.
Photoshop :: Images Pasting Small
Aug 13, 2004i have photshop cs and when i paste a picture into photoshop from my "my pictures" folder after selecting parts of the image with the magnetic lasso, it pastes fine. mind you, its in jpeg form, because its pictures i myself took with my digital camera. ok, thats not a problem. but when i go into another folder that has pictures on my computer, use the magnetic lasso to take part of the image and paste it once again on a blank new canvas---THE IMAGES PASTE LIKE 25% OF THE ORIGINAL SIZE!! it only does this with this one particular folder. i like making collages of my pics, so i open up a custom, 8x10 new blank canvas, and when i print, it always comes up super small when pasted. i try resizing the images, but they are pixelated, so it looks blurry the bigger i make it. how can i paste images in accordance with their original size and stop getting these super small midget sizes of my image?
View 3 Replies View Related