Photoshop :: Apply Same (color) Changes From Copy To Original Image Or Another Copy
Aug 26, 2013
For this example let's take in account that I have 2 identical in every aspect copies (meaning size and content at this point) of the very same image.
1st remains unedited,
2nd is edited only as far as concerning the image > adjustments menu through changing mostly channel mixer, selective color, saturation etc values and had an object attached to it atop of the original depiction before being edited as a whole.
What I want to do is to edit the 1st image, compare in some certain ways the colors of it I guess with the ones of the 2nd, match for instance where color hex value X (and horizontal/vertical X,Y coords - is it needed in order to be more precise and avoid mistakes?) (I guess again) from the 1st image is edited into color (or even additional settings atop of that?) hex value Z, do that automatically for all the combinations and immediately apply the same changes I applied from 2nd pic when unedited (and looked exactly like 1st pic) to the very same 2nd pic in start, TO the 1st pic in the present case. Also in order to do this "color matching" before applied or not I need to set out-seperate the area where I have added an additional object in the 2nd picture and fill it possibly with the original content from the 1st(can it be done in one move) in order for the process to be complete?
That means I turned the 2nd image into a combination of blue-green-red colour (and other) from orange-yellow-cyan (just an example) I want to do the very same to my 1st pic which is orange-yellow-cyan etc.
In LR 4, I have created a virtual copy for the purpose of cropping, but when I crop it in Develop, the original image is getting cropped as well. Have I misunderstood something?
I'm using Corel Draw 12 and on some of my computers, if I resize or flip an image the original image remains on screen as well as the resized or flipped version. On other computers it doesn't happen.
When I load an image either a jpeg or psd file then make a layer copy I am unable to apply a preset action to this. Either a default action or one of my own on a Mac OSX running Lion. This did not present a problem in CS5 and I am wondering if I've missed something basic?
I have a keyboard shortcut for Copy (see directly below). This command doesn't copy multiple. But if I type "Copy" at the comment prompt (AutoCAD 2013) the copy multiple is the default. Copymode is already set to "0".
I open a PS file. I chose 'Save As' but uncheck 'Show Layers' in the dialog box. So now it's essentially a 'Save A Copy'. When the new file is saved the original file is written to (although nothing changed) and now has the same modification date as the 'Save A Copy' file. Super strange and causing issues. Because if one flattens or does anything to the original file, those changes are baked into the original file!
Mac OS 10.7.3 iMac i7 3.4GHz 32 GB RAM 256GB internal SSD (scratch disk) 1 TB internal SATA (system/data disk) ColorEdge CG275W main monitor via Thunderbolt
Photoshop 12.0.4 Nik ColorEFX Pro 3.x Onone Perfect Resize Pro 7.x
-- I can write without problems Action for each special folder, but it take too many time to make 1000 Actions like 1000 folders I have. The problem is in SAVE AS command wich I use in Action. It remembers folder witch was used while recording. Then if I try "Override SAVE AS" option in the Batch window I get edited original files without creatig copies.
I can choose destination NONE, SAVE AND CLOSE, FOLDER. Simply, what I need is SAVE AS COPY AND CLOSE.
In Elements 11 each time I copy a shape the pasted copy appears in a new layer. I would like to have the pasted copy stay in the same layer as the original shape. How do?
I am currently designing a kitchen with a complete floor plan. I had requested some accessories files from a company called Pearl works and they sent me each file that I requested. The problem is that when I copy and paste each image file into my existing floor plan, they all show up as the same image and not the seperate images that should appear. Am I doing something wrong with the clipboard process?
I have also tried deleting the drawing and re-inserting a different file and when I do every file thereafter is the same as the one that I just switched.
I have many files which I created by making a copy of the original and editing it. I have the original file with no edit history. The copy which shows the results of the editing is marked as a missing file and the edit history is greyed out. Both file share the same name with the exception that one is a copy. Is there any way to re-link these files? When I try to search for the missing file and point to the original, it tells me that the file is already linked to a file and can't be linked to a second file.
I have two DWG files and I want to paste the content of the first into the second file with the original coordinates. It sounds very easy (and I am sure it is) but I am still failing. I open the first file, select all (crtl a), copy all (crtl a), open the other file and want to chose the function: right click > paste with original coordinates. But this open is not active (grey) and can not be clicked. Actually there is no paste function available to click on if I do a right click.
In Autocad 2013, when I highlight a drawing in model space and copy, then go to new drawing and paste to original coordinates, everything comes in fine except for blocks. the blocks get thrown far away from everything else.
Is there a way to subtract and object but it doesn't erase the original object?
I have a way of doing this by copying an object and placing it in the original position. Than subtract a single object leaving the copy of the object behind.
I wondered if there is a way to accomplish this with less steps.
I have been working on a file in photoshop cs5 that had come from lightroom 5.3. This was then saved (automatically becomes tiff file in Lightroom). I then wanted to make some more adjustments to it in lightroom (using local adjustment clarity). I then tried to copy the settings of the adjustment brush from the tiff to the original raw file. This is where it gets very strange. The adjustments are copied but they are rotated ccw by 90 degrees! I can replicate this every time.
Recently I have been asked for certain images taken in 2011.
When searching for them I have discovered that the original capture information has been "gone missing / become lost".
For clarity, the information I'm referring to is the ACTUAL capture date and time of the original image as appears in the raw file metadata.
This data no longer appears on ANY of the subsequent version of any image taken in that year whether PSD or Jpeg.From checks already carried out, the data remains on the original RAW files.
All other years are OK.How can I transfer the date & time of the original image capture from the raw file to subsequents copies (PSD / Jpegs etc)? As literally hundreds of images are involved, is there a bulk routine that I can perform to synchronise this data?
Quite often I'll paint up a frame, having forgotten to switch 'current frame' to 'sequence'. Is there any way to copy and apply a current frame's paintups to the sequence after the fact?
smoke 2013 EXT1 iMac i7 3.4Ghz NVIDIA GeForce GTX 680MX 2048 MB 32GB RAM MAC OS X 10.8.3 Promise R6
I am having problems trying to produce an image with reflections. I have been doing it in the past with Xara4. My procedure is to take a number of images, create copies of them, flip them then add transparency once they are in place as refelctions. These are all placed onto a dark background; reflections are stretching beyond the background at this stage. And in the past if I select all, then Arrange>Combine Shapes>Intersect Shapes then I can have the whole image without the transparent regions of the reflections. My plan is to have the background transparent and save all as a png to preserve the transparency on web. But it doesn't seem to happen in my latest attempts. Instead at the Intersect Shapes stage I get a tiny part of the background as my final image....
I'm upgrading to a Zenbook which has no optical drive so I won't be able to install PS via the disk that I purchased a couple years ago. Would the key from my hard copy work with a downloaded copy of PS?
I'm using AutoCAD 2013 that came with Building Design Suite (Revit) and the copy command terminates after making the first copy, instead of continuing to make multiple copies until I terminate the command. Is there a switch to control this? A sysvar?
I have a 3D file (not of my creation) that gives me some problems when I try to copy it (it is a 3D building).
The problem is that, when i click on "copy" command, I can select a point but then AutoCAD crashes and it takes about 30 seconds to return working a normal way and permit me to paste it. (it happens with "move" command too)
Otherwise, if I use "copy with base point" I have no problems: after a second I can paste it where I want.
How can it be possible? Cause if sometimes I mistake and digit "copy", I always have to wait the long Autocad response.
This problem happens with both autocad 2012 and 2013 and it doesn't happen with other 3D files I have. The drawing is made mainly of meshes.
I have a Dell notebook and a NVIDIA Quadro 2000M video card, so you can understand I don't like this problems: I spent a lot of money for something I hoped could work well with AutoCAD.
About that, aren't there drivers for the graphic card? Cause when I click on "check for updates", autocad says me that there are newer version of the driver, but then it says me that it is impossible to update it (I have a connession and a student version).
I recently upgraded to Civil 3D 2011 from C3D2010. I have used the same ACAD.PGP file for years that includes the shortcut C for the COPY command. Up until C3D2011 this would always allow me to copy an entity multiple times, (the default when COPYMODE is set to 0).
I am running C3D2011 64bit on WIN 7 64bit OS. It happens with other commands too that use a dialog box normally, i.e. INSERT - it only brings up the command line version of it.
I am having a problem with memory. I am running Windows XP with 4GB ram. when i start laying out in paper space, i copy the window in one page or copy multiple pages, every time i copy a page of window my memory builds up & up & up with each one until it gets to over 2 GB & the it tell me that if i continue with this next process CAD will crash because i have maxed out the virtual memory. This is usually not a problem when i am doing smaller one off drawings with a few pages of windows but when i am doing a bigger project with 20+ pages or windows i run out of memory.
I gave the latest file to my business partner & he does not have this problem at all. He can open up many windows & as many pages as Cad will allow. His memory always fluctuates around the same 2GB. He is running Windows 7 with 4 GB ram.
I have a number of documents to be used as web pages, and need them all sliced in exactly the same manner. How can I apply the slicing map from one document - not any image content, just the slicing lines that I have drawn with the slice tool - to another document with the same exact dimensions?
I'm about 3 months and many hours of tutorials into Premiere ProCC, Audition CC, and Encore CS6. Apparently the nifty dynamic links from PPro and Audition CS6 no longer work with encore, as encore was not upgraded to CC. So,
I want to sample color from an original Photoshop image, and create an Encore menu color set, so that my menu buttons, etc. are colored to match the main photo image in the menu. Is there an eyedropper kind of tool in Encore that would let me sample the color from the image, and then apply that to color swatches in the Encore button layers?
Had a text logo created on a white canvas/background. Made the white background transparent, then placed the logo on a green web page. Traces of white appear around the text edges. Is there a way to remove the traces of the original background color that appear around text when I place a transparent GIF on a different background color assuming I don't have the original psd/png file only the transparent GIF?
I have an area in a photo with a color distribution. I would like to copy this color distribution and Fill another area with the same distribution. Is this possible ? How ?
I'm running on LR 5.3, but this problem persisted in LR 5.2. Working in PS CS6 and Camera Raw 8.3. RAWs are NEFs from a Nikon D600.
I can't figure out what happened but suddenly I am not getting prompts when moving from LR to PS to "Edit Original" or "Edit a Copy".
I reset all dialog warnings and nothing. The prompt will appear for TIFFs but not for NEFs.
It's kind of pointless to not be able to choose to edit an original or copy with LR adjustments for a RAW when they are the file types that retain my RAW editing information.
Plus, when I do click on a NEF and choose to edit in PS without the prompt (it will appear with lightroom adjustments, not as original), it will open a second icon for photoshop on my dock, and prompt me to continue trial? I have a version of PS installed with the serial plugged in, and in LR "edit in PS" for a TIFF will open this primary version.
I have a document that is 8X12 with a white background.
1. create new layer 2. click on color from swatches. 3. draw a rectangle holding shift. Now I have rectangle that has a color. (Change to Pixels in options)
Can I copy that new rectangle with a different color?? Can I copy and replace that color??
Sounds simple. I can't find a method to do it!
The reason to do it this way is the rectangle will show in layer as a colored square on transparent background.
