I'm upgrading to a Zenbook which has no optical drive so I won't be able to install PS via the disk that I purchased a couple years ago. Would the key from my hard copy work with a downloaded copy of PS?
View 1 RepliesI have a keyboard shortcut for Copy (see directly below). This command doesn't copy multiple. But if I type "Copy" at the comment prompt (AutoCAD 2013) the copy multiple is the default. Copymode is already set to "0".
(DEFUN C:C()
(setvar "SNAPMODE" 1)(COMMAND "_COPY")
(PRIN1)
)
Something in Lightroom 4 is preventing the photos file from being transfer to my backup harddrive. This started the beginning of this month.
View 1 Replies View RelatedCan I import and copy from external hard drive into organizer? Under Get Photos, I select import from folders/files but after browsing to the external hard drive the copy option is disabled/greyed out. I there a method to import and copy?
View 3 Replies View RelatedI just started my CAD classes. I have been doing basic 2d drawing and just learning the commands etc.
My question concerns polar coordinates. I know how they work, but are you expected to be able to get polar coordinates off lets say a hard copy drawing with no annotations.
My homework so far has always had the length of the lines depicted on the drawing but not the angles. So if I was required to replicate a drawing that had no annotation is there any way other than guessing or whipping out my protractor.
This is just a nagging thought as I strive to understand CAD.
I would like to consolidate all of my image files onto one hard drive by copying them from multiple drives to one large new one. The desired result is that I would have my library on that new drive, with all the links making sense to LR, but leaving the original files on those original drives as an archival back up. I know how to MOVE the files within LR, but I can't figure out how to COPY them. If the image files were not already in the catalog, I would just import them using "copy and add to catalog." Worst case, I suppose I could move all of the files to the new drive and then export copies to the old drives, but that seems very time consuming. I have more than 3TB of files.
View 2 Replies View RelatedI store my images on an external hard drive. I recently upgraded from LR 3.6 on a windows XP machine to LR 5 on an iMac. I moved my catalogue fine, I think, as I can see all my images in LR 5 on the iMac. The problem is that I suspect there is some problem between the iMac and the external hard drive. I cannot import my RAW photos from my CF card into LR and onto the external hard drive. LR tells me "could not copy files to the requested location."
Is there some problem because I changed from windows to Mac? Problem bc I upgraded from LR 3.6 to LR 5?
For this example let's take in account that I have 2 identical in every aspect copies (meaning size and content at this point) of the very same image.
1st remains unedited,
2nd is edited only as far as concerning the image > adjustments menu through changing mostly channel mixer, selective color, saturation etc values and had an object attached to it atop of the original depiction before being edited as a whole.
What I want to do is to edit the 1st image, compare in some certain ways the colors of it I guess with the ones of the 2nd, match for instance where color hex value X (and horizontal/vertical X,Y coords - is it needed in order to be more precise and avoid mistakes?) (I guess again) from the 1st image is edited into color (or even additional settings atop of that?) hex value Z, do that automatically for all the combinations and immediately apply the same changes I applied from 2nd pic when unedited (and looked exactly like 1st pic) to the very same 2nd pic in start, TO the 1st pic in the present case. Also in order to do this "color matching" before applied or not I need to set out-seperate the area where I have added an additional object in the 2nd picture and fill it possibly with the original content from the 1st(can it be done in one move) in order for the process to be complete?
That means I turned the 2nd image into a combination of blue-green-red colour (and other) from orange-yellow-cyan (just an example) I want to do the very same to my 1st pic which is orange-yellow-cyan etc.
I turned off the levels from the layer palette and then I linked 2 images and clicked on copy merge but it doesn't work.
How do I merge 2 image together without the levels?
I have been having trouble with the reselect tool for a while now. I often select something and then use new layer via copy ( J). The problem is that I cannot reselect after doing that (the option is grayed out), and it doesn't matter if I do the new layer copy with the shortcut or menu.
I am using CS5 with Mac 10.8.4, just recently switched from 10.6.8 (it hasn't worked in either). I do know that I have successfully used reselect after J before, but it was on a work computer -- I believe that computer was running 10.6.8 but it might have been CS4 if I recall correctly.
There are definitely workarounds like saving a selection or path, but they are still a little slower to use when it is something that I don't need to keep around for a while. I sometimes can use command-click on the layer icon but that selects the newly copied pixels, which can sometimes be different than what I had selected -- for example, if I copied a portion of a layer of linework, it will select the lines alone but not the area that I had.
I'm using AutoCAD 2013 that came with Building Design Suite (Revit) and the copy command terminates after making the first copy, instead of continuing to make multiple copies until I terminate the command. Is there a switch to control this? A sysvar?
View 2 Replies View Relatedi have various files which I cannot copy elements of into other drawings.
when i use the ctrol+copy command, I get the "copy to clipboard failed". This has only started since I upgraded to AutoCAD2012.
I have a 3D file (not of my creation) that gives me some problems when I try to copy it (it is a 3D building).
The problem is that, when i click on "copy" command, I can select a point but then AutoCAD crashes and it takes about 30 seconds to return working a normal way and permit me to paste it. (it happens with "move" command too)
Otherwise, if I use "copy with base point" I have no problems: after a second I can paste it where I want.
How can it be possible? Cause if sometimes I mistake and digit "copy", I always have to wait the long Autocad response.
This problem happens with both autocad 2012 and 2013 and it doesn't happen with other 3D files I have. The drawing is made mainly of meshes.
I have a Dell notebook and a NVIDIA Quadro 2000M video card, so you can understand I don't like this problems: I spent a lot of money for something I hoped could work well with AutoCAD.
About that, aren't there drivers for the graphic card? Cause when I click on "check for updates", autocad says me that there are newer version of the driver, but then it says me that it is impossible to update it (I have a connession and a student version).
I recently upgraded to Civil 3D 2011 from C3D2010. I have used the same ACAD.PGP file for years that includes the shortcut C for the COPY command. Up until C3D2011 this would always allow me to copy an entity multiple times, (the default when COPYMODE is set to 0).
I am running C3D2011 64bit on WIN 7 64bit OS. It happens with other commands too that use a dialog box normally, i.e. INSERT - it only brings up the command line version of it.
I am trying to make an assembly copy as separate project using the iLogic Design Copy feature.
Everything seems fine except I do not have my involved in assemblyContet Centerparts in this copy.
I am also have no any possibility to chose the Content Center folder in the iLogic Design Copy feature as it does not showup there.
[URL]
I am having a problem with memory. I am running Windows XP with 4GB ram. when i start laying out in paper space, i copy the window in one page or copy multiple pages, every time i copy a page of window my memory builds up & up & up with each one until it gets to over 2 GB & the it tell me that if i continue with this next process CAD will crash because i have maxed out the virtual memory. This is usually not a problem when i am doing smaller one off drawings with a few pages of windows but when i am doing a bigger project with 20+ pages or windows i run out of memory.
I gave the latest file to my business partner & he does not have this problem at all. He can open up many windows & as many pages as Cad will allow. His memory always fluctuates around the same 2GB. He is running Windows 7 with 4 GB ram.
How do I copy a pdf to Panit.net in order to work on it.
View 4 Replies View RelatedI can not get copy metadata to work in LR4 or 4.1. When I click on copy metadata, with a picture selected that has metadata, a window opens with the metadata form. None of the check boxes has any metadata in them from the picture I selected. If I fill in some of the boxes and then paste to another picture, that works. The same thing happens with sync. It appears that the metadata from the selected picture is not read when clicking on copy metadata.. I am running LR4.1 under Win 7 on a PC.
View 2 Replies View Relatedlist all known reasons for pasting and inserting geometry to the DWG might fail.
1) Block that was not created by Autocad application was inserted to the drawing.E.g. the guy who does installation network sent you the file, and you happily inserted his work to your DWG.Bummer, copy paste stopped working.
SOLUTION: Weed out all of his blocks see Block removal thread. Design center might be of use (ADCENTER).
PREVENTION: Before inserting any outside work to your drawing do open it in Autocad and do EXPORTTOAUTOCAD command, than -PURGE /r, -PURGE /a, audit SAVE, CLOSE, RECOVER, SAVE. After that you can use the data more safely and insert to your drawing.
Do check block and attribute names and change to your needs. Try not to have same names if the actual block or attribute is really not the same.Check all the layer names, styles and line types too so you do not inherit what you do not need.
I am using Adobe Photoshop CS6, latest version as of 05/25/12.I have 19 layers, each has a 1200x1200px texture. These are of course overlapped, so setting them all to visible will only show the top layer.
All layers are rasterized, and contain 1200x1200px:
1) I select all 19 layers using shift+click, all are highlighted (in the layer pane).
2) I select a region using the selection tool, in this case a rectangular region that is 172px high and 35px wide.
3) I right click the selection, and then select: layer via copy. (Note, Layer via cut is disabled for some reason)
4) *problem* It creates 19 new layers with the full image from the selected layers and not the selection which is what I wanted to place in the new layers.
5) *problem* when I right click the selection and select "Free Transform", the transform box surrounds the entire canvas and not the selection.
6) *problem* when I skew, it skews the entire image and not just the selection.
7) *problem* Previously, I have been able to select a layer from the layer pane, go to image menu, select adjustments, brightness/contrast, and adjust the brightness/contrast for just that layer. Now it wont let me.
8) *related problem* If I have 3 layers (background, 1, and 2) on a 1200x1200 canvas, with the image in layer 1 being 150px, and the image in layer 2 being 150x, each rasterized, and then stack the images on 1 and 2 over eachother, then select both layers, then select a region inside the stacked images, then select free transform, the free transform selection embodies all pixels inside the canvas (not the entire canvas this time) and performs the transform on these pixels and not the original selection.
If I do it making all the layers visible as well as selected, it behaves the same.What appears to be happening is Photoshop is ignoring the selection and for some reason is using a pixel region (or if pixels cover the entire canvas, the whole image) when performing actions intended for the selection.
What's strange is when I made these textures, I started out with 19 150x150 pictures, I set the canvas size to 1200x1200, selected all the layers in the layer pane, selected the 150x150 image in the middle, and was able to move all 19 textures to the top right corner, able to switch to transform on all 19 pictures, able to rotate 180 degrees all 19 pictures, was able to flip horizontal all 19 pictures, then able to copy all 19 pictures to new layers, move the 19 pictures all at the same time to the right 150 pixels, rinse and repeat, to eventually come out with 19 1200x1200 textures tiled from the 150px pictures. In other words, I did exactly what I am attempting to do with the 1200x1200 pictures with the 150x150 pixtures and it worked like a champ.
The end goal of course is to take a selection of all 19 of the 1200x1200 pictures, transform, then skew that image to make a collage of images applied to an added background. Performing this on all 19 textures and getting the same exact skew, etc would take days considering I need to do about 15 of different portions of the tile.
When importing something off of a DVD or CD how do I direct Lightroom to copy the imported images or folder to a specific folder on my hard drive? It seems to default to MyCatalog but leaves the location on the CD rather than copying it to the drive. If I remove the CD the images is reported as missing.
When I go to the top of the screen for importing I can change the source but the location info on the right is not active or changeable.I am new to lightroom and coming from Photoshop Elements background.
When I use copy or copy with base point and paste or paste to original coordinates in another drawing, nothing is being copied.
I use autocad 2013
The isuue is dwg related. It only happens when i paste to some of my dwg (usualy the most important ones...). All the drawing files that are affected are in 2013 format, but if i save them to older version the problem persist.
I ve tried
-purge r, purge a, audit, save
-wblock explode, purge a, audit, save
to no avail.
Tried many other solutions sa well, but nothing worked. What on earth could be wrong with DWG to prevent pasting from another drawing? Those drawings have been saved to lower formats before.
I'm attempting to copy paste a block and a line from one tab to another in the same drawing and it doesnt appear. I get
Command: _pasteclip Duplicate definition of block _Oblique ignored.
Duplicate definition of block _ArchTick ignored.
Duplicate definition of block attr_FFL ignored.
i've purged, i've audited, i've even created a new drawing and transfered the information but im still getting this problem.The strange thing is occasionally it works.also, i purge so the drawing it is clean, then i try to paste, then when purging again 1000's of blocks appear in the purge diologue box. A49285 to A55404 & a block called A$C4E2C21A4
I've got a user that when he clicks on an item to highlight it, he can't drag it anywhere, can't copy and paste it, and can't delete it. I've uninstalled and resinstalled the application more than once. After an uninstall, I went through all directories and deleted all remaining files and folders that had either Autodesk or AutoCAD in the name and spent 1 1/2 hrs sifting through the registry and eliminating all Autodesk and AutoCAD entries. I then reinstalled the application (AutoCAD 2010), and the user is still having the same issues.
OS: Windows XP SP3
Product: AutoCAD 2010
Normally when I hit move or copy there cursor will change to a square and I can click single items for the command. If I enter "c" on the command line and change to the cross cursor I can select multiple objects by clicking and dragging.
In some drawing the cursor will not change to a square and I can not enter "c" on the command line. I can select single objects but the cursor becomes the standard windows arrow.
Is there a setting / variable in the drawing that can affect this?
I go back and forth between older drawings in 2009 a lot while my current drawings are in Civil 3d 2012. Is there a way to copy linework from a Civil 3D drawing into my 2009 drawing easily. I used to be able to copy and paste between drawings but that doesn't work between these versions. Right now I have to wblock out the linework and open that new drawing and save as 2004 then import it into the old drawing.
View 1 Replies View RelatedI have two DWG files and I want to paste the content of the first into the second file with the original coordinates. It sounds very easy (and I am sure it is) but I am still failing. I open the first file, select all (crtl a), copy all (crtl a), open the other file and want to chose the function: right click > paste with original coordinates. But this open is not active (grey) and can not be clicked. Actually there is no paste function available to click on if I do a right click.
btw. I am working with AutoCAD 2012.
This problem has never been in CS6, it is only in the CC. When I past an object from Illustrator CC to PowerPoint I see unexplaned code.
View 2 Replies View RelatedWhen I import pictures from my SD Card I usually leave copies on the card for a while so I have them as backup, and to also be able to see recent pics on my camera. However each time I go to import pictures from that card within LR, it defaults to selecting all pics on my SD card even though I have the "New Photos" filter selected at the top of the import box. It always puts all my photos in the "New Photos" section, so I have to deselect all the photos that I have already imported into my catalogue so I don't get duplicates. How do I get LR to only import pics that haven't been imported bfore?
I am aware of the "Don't Import Suspected Duplicates" option, but that is not the samea as what I am looking for. It only deselects photos that still exist in my catalogue. Any photos that I have deleted from my catalogue remain selected in the import box as it doesn't see any duplicates.
what I'm missing to have LR only select photos that haven't been previously imported from that card?
In older versions of PSP, auto-save would automatically save a copy of the work in progress every X minutes (depending on what was set by the user) and overwriting the previous version, including the original if not working on a copy of it.
In PSPX4, auto-preserve added the functionality of saving a copy of the original to avoid overwriting it, but it also has autosave setting.
Questions :
- what does the autosave do except save the image when changing from Edit to Manage to Adjust?
- does autosave automatically save a copy (even if overwriting) of the work in progress?
- if so, where do we set how frequently a save should be?
I am having several problems with my xrefs. My two big problems are xrefs bringing in way more information than I want, and they are duplicating if they are selected, even when I have the xref layers locked.
My set up is this:
I have a plan file, a grid line file, an elevation file, and a section file.
I want all files to be referenced to each other. However, I do not want duplicates of any xref. For instance, in my section drawing, I will reference my plan file which consequently brings in any file that is referenced in the plan file. I know that I will get the circular reference warning and that I can click continue. However, is there any way I can just get "1 degree of nesting"?
Second, I cannot figure out how to lock my xrefs to prevent them from constantly being selected. My problem is that in my live drawing information, if I select everything within my window and an xref is in that window, it will be copied. I don't ever want to duplicate my xrefs, but I can't find a way to lock them (even when locking xref layers).