I've got a Photoshop file that someone wants me to use as a template. It has an existing layer that I need to put a picture into without modifying the layer or creating a new one.
Whenever I cut and paste a picture into it, the pasted picture becomes "Layer 1" but I want it to paste onto a layer which is already there (rather than become a new layer).
I am still getting used to version 2010, and am unable to paste items into an existing block, is there a setting I can adjust to remedy this?
View 4 Replies View RelatedI've set up some images with layer masks, but i'm problems pasting items on to the layers that are masked. When ever I paste, photoshop (cs3) creates a new layer. Surely there is a way to paste onto the selected layer, and not to create a new layer?
View 3 Replies View RelatedI am trying to paste a layer of a bridge over a river, however, the bridge is almost transparent. I need the top layer to be solid over the background. How can i do this?
View 1 Replies View RelatedUpon trying to open a line sheet i'm working on, photoshop tells me:
Problems were encountered reading layers
"..."
"..."
"..."
Because the layer is not a valid layer. Some layers will use existing pixel data.
I know that if I make a selection I can press Ctrl + J to promote that selection to a new layer. Is there a way to promote the layer but leave the focus on the existing layer?
What would be the absolute icing on the cake would be if I could have the focus stay on the existing layer AND for the selection that has just been promoted to be de-selected.
I have turned a coloured photo grayscale but when I paste a coloured image onto it, it also turns grayscale.
View 1 Replies View Relatedis it possible to use an existing layer as a layer mask?
im trying to use a dirt map from a file to mask some moss, but when i add a layer mask and try and copy the dirt map into the mask channel,
I have a black and white image I want to use this layer as a transparency/opacity mask to another layer of the same dimensions. Is it possible to import the existing black and white image as the layer mask as opposed to manually painting in the mask?
View 1 Replies View RelatedHow do I paste a graphic over an existing graphic on a header? and how do I determine the amount of pixels to be covered and the amount of pixels in the graphic I am wanting to use?
View 3 Replies View RelatedI'd like to have/write a lisp to change all objects on layer "0" to layer "PC - Module"
If possible also;
save the document close the document open next in directory run layer changer program again.
I've tried the standard solution of File>Windows>Dialog boxes>layers
But that does absolutely nothing. Pressing CTRL+L does not produce the box either. Since its a fresh install and i have not closed it by accident i cannot reopen it using the recently closed windows option.
Is the layers box docked to another window by default maybe?
Also when i make a selection and paste it into as a new image with a transparent background the selection becomes transparent and i don't know how to make it fully opaque.
I organize my documents into different layers. The problem that I'm facing is that the paths jump places when I paste. If I want to move a set of paths into another layer, I cut and paste. But the paths either paste in front of the layer it started on, or on a layer other than where I commanded them to be pasted. I'm looking into pasting a set of paths in a layer by my choice, but it keeps on wanting to do its own thing. Also, I do know that layers can be clicked and dragged into different positions on the layers palette, but I have so many. This technique slows me down.
View 3 Replies View RelatedI was trying to teach myself to use gradients the other day... And now when I start a new project and try to paste in a photo as a new layer, it pastes as the gradient instead.
I have opened up both the gradients dialog and the gradients editor but cannot turn it off. In fact, when I open a brand new (empty) file, I can see the gradient attached to my pointer (mouse).
Is there a way to cut pixels from one layer and paste them to a selected layer (as opposed to pasting the pixels to a new layer which is created by PhotoShop)?
Also, is there an easy way to make sure that the pasted pixels remain in their original position with respect to the overall canvas? I'm simply trying to move pixels from one layer to another layer while maintaining the position of the original pixels.
I've got a Photoshop file that someone wants me to use as a template. It has an existing layer that I need to put a picture into without modifying the layer or creating a new one.
Everytime I add a picture it comes up as a new layer. How can I add it to the existing one?
I have 2 layers. One is a photo, and the other is a black and white layer I want to use as a mask for the photo.
View 6 Replies View RelatedI can no longer drag and drop photos within photoshop elements 12. When working with a layer, I want to move it to a layer within another existing file, and no longer have the option. The only way I have fixed the issue in the past is uninstall and reinstall the program. I've read other forum posts and followed the instructions by resetting preferences and it does not work.
View 8 Replies View RelatedI have a type layer with some text in it (a headline, let's say). I click on the layer, I click on the Character Panel, and first thing I see is the color in the Panel is not the color of the font in the layer.
I then click on any Panel property, and the text in this layer is replaced by text from another layer in my document ( a paragraph layer, let's say), but the color is not the same as the layer the text came from.
Is there an way that I can get an new layer that I create to be frozen in all existing viewports on my drawing. I know you can freeze an newly created layer for all new viewports but that does not solve the fact that the new layer will show on all existing viewports.
View 5 Replies View Relatedtrying to copy txt from an outside text editor and pasting them into an open, editable text layer in my workspace. The problem is that I can COPY the text fine, but when I click over to PS to paste it into the open editable text layer it either pastes the previous text from my clipboard OR it won't paste anything at all. I can then go into any other text field on a browser, spreadsheet document, a different text editor, notepad, etc and successfully paste the proper batch of text I wanted to paste into PS. Sometimes I have some rather large files open 50+megs when I notice this happen. I have to save my work and close out entirely of PS and then open it again before I can begin editing my original document again and successfully paste the text into the open editable text layer. This may last for a few COPY/PASTE sessions of additional text in additional text layers, but then begins displaying the symptoms I described above.
I am on Win7 on an AlienWare M17XR3 laptop with 16G RAM and AMD Radeon HD 6900M Series display adapter.I assume it's either in my PS performance settings which I have PS using 10413MB RAM and has over 350G scratch disk space. If it's not that I guess my laptop system performance settings which I've never tinkered with since I purchased it.
I have a psd file with several layers that includes a mask (filled in red) which is what I want to use as the shape of the image. Every tutorial has a different way of creating a mask but I can't figure out how to do it when the mask is a layer within an existing file. There's no option to save the mask to disk so I can load it into a new raster image to merge it with the image.
View 9 Replies View RelatedI have a five-frame animation to which I would like to add a background and I don't have enough GIMP knowledge to do it myself, so I've been trying to use the merge-anim script (URL...). When I use it under Debian Linux, with GIMP 2.6.10 (I have also tried it with GIMP 2.6.11 under Windows 7) however, it gives two error messages.
The first is "Plug-In 'Merge layer with others' left image undo in inconsistent state, closing open undo groups."
The second is "Error while executing script-fu-merge-anim: Error: not enough arguments."
The merge never does occur.The script doesn't have any real instructions and I haven't seen any anywhere else (just a number of example results that don't show the steps take), so my first attempt was with all the default values that came up and then other attempts were with changes to various options. None of them made any difference. The error messages were always the same and the script-fu console did not show any messages.
Do any of you know if this script, as old as it is, even still works with GIMP 2.6.10, or is it just a completely dead project that would only work with older versions of GIMP?
If it SHOULD work with GIMP 2.6.10 for Linux or GIMP 2.6.11 for Windows, what I should do to fix these errors and get it to work properly.
If there's no hope for the script, how DO I make a "background" layer the background for each frame of an existing animation. Also, if it makes any difference, the background I'm trying to use is a gradient created by GIMP.
I'd like to be to select a layer groups and copy them over to another pre-existing image.
I've been struggling with this for an hour or so, and I haven't found a way to do this.
Is is possible to do this in GIMP?
The closet I've found is a kind of paste where you do this: drag the tab of the origin image over to the tab of the target image. The result is a new layer in the target image called "dropped buffer". However, the entire origin image is imported flattened.
I've been trying other drag and drop operations, but without success. Usually when I drop the selection to the target image, the icon under the mouse dissapears, and nothing actually happens.
I thought this might be a window manager problem. But I get the same results across kde, gnome and xfce.
Note Layer > Duplicate will not work in this regard, because I want to copy one group of paths/elements from one layer to other existing layers, not to a new layer.
I have not found a command for this, nor have I found any scripts. Note I'm using CS3 but have been thinking about an upgrade.
I have an image which is simply a one color gradient, with transparency from nothing to something. I would like to be able to access the existing gradient on the image and change only the color. I have hunted high and low and cannot see how to do this.
(I am familiar with how to make a new gradient and how to change the colors in a saved gradient via the gradient dialogue. But for the life of me, I can't see how to access an existing gradient on an image and change only this one parameter.
For example, I'm making revisions to a plan and drag a block or xref of the floor plan changes where walls/doors/windows have moved. I want to be able to simply pick the underlying linework as opposed to tracing over each line of said xref/block.
View 8 Replies View RelatedI'm trying to create an all new existing surface over existing ground. I have a TIN surface of the EG, and I have drawn overlay splines that describe the new surface, but how to go about creating that design surface.
It is a compound surface, open on one end and closed all around on the other, somewhat like a half of a football stadium, but with an irregular upper edge because I am needing to figure out cuts and fills to manipulate the EG into this new surface without costly major terraforming. There is about 40-50' vertical elevation between the "field" and the upper rim with a generally constant 7-10 deg. slope all around. I'm just at a loss to figure out how to approach this project, and am quite new to Civil 3D.
Civil3D 2013
MacBookPro 17 - 2.4GHz Intel QuadCore i7 (Late 2011 build)
Microsoft Windows 7 64bit
350GB Bootcamp volume
Some background: We have a composite surface of existing surveyed contours as a TIN pasted into existing aerial contours that we received from a client. We used polylines to generate our proposed contours, and then generated a proposed surface from that. We've made a blank surface, pasted in the existing surface, and are trying to paste in our proposed surface... only the existing contours outside of the proposed suface no longer line up correctly once we do.
We've tried applying the method laid out here: [URL] ........ (and the link referenced in the bottom) but are still having trouble getting the surface to work. We've tried offsetting as little as 0.25' and as much as 5' with the feature line draped over the existing surface, but it seemed that the greater the offset, the greater the discrepancy.
Just to make sure we even tried that correctly - should the breaklines that we add be standard or non-destructive? (I've tried it both ways with little success either way, so I don't know if it matters much in this instance, but perhaps for future reference it would work.)
I've attached a screen shot of our surfaces. The pink and green lines are the proposed contours, the white dashed are the existing. The outer red line is offset 0.25'. As I've mentioned, we've tried offsetting various amounts with decreasing success.
Everytime I copy and paste from one image into another, all I seem to get is a big white area the same shape as the image I tried to paste. Where am I going wrong?
View 1 Replies View RelatedI'm having a weird problem with pasting text into Photoshop. It had been working fine until today. Here is how I usually do it (and it won't work now):
Copy text from email or web page into basic text editor. Make any changes necessary.
Copy text from text editor.
Paste into Photoshop text field.
Today when I try to paste the text into Photoshop nothing happens. It pastes fine into other programs such as Illustrator (and even this form.) And it will copy and paste from Illustrator to Photoshop (though it comes through styled which is not what I want.)
I've run my usual repair programs but that didn't clear up the problem. how to fix this?
Adobe Photoshop 5.5
Mac Pro w/OS X 10.6.8