I know that if I make a selection I can press Ctrl + J to promote that selection to a new layer. Is there a way to promote the layer but leave the focus on the existing layer?
What would be the absolute icing on the cake would be if I could have the focus stay on the existing layer AND for the selection that has just been promoted to be de-selected.
I have a selection that I would like to promote to a layer. I feel that I have done this before but I cannot remember how.
View 1 Replies View RelatedI have a selection that I would like to promote to a layer.
View 1 Replies View RelatedUpon trying to open a line sheet i'm working on, photoshop tells me:
Problems were encountered reading layers
"..."
"..."
"..."
Because the layer is not a valid layer. Some layers will use existing pixel data.
is it possible to use an existing layer as a layer mask?
im trying to use a dirt map from a file to mask some moss, but when i add a layer mask and try and copy the dirt map into the mask channel,
I have a black and white image I want to use this layer as a transparency/opacity mask to another layer of the same dimensions. Is it possible to import the existing black and white image as the layer mask as opposed to manually painting in the mask?
View 1 Replies View RelatedI'd like to have/write a lisp to change all objects on layer "0" to layer "PC - Module"
If possible also;
save the document close the document open next in directory run layer changer program again.
I frequently create multiple paths on a single layer with the intention of applying a stroke to each of them at the same time. I typically lay out the paths roughly and then go in with the Direct Select tool to refine them before applying the stroke.
In previous versions, once I'd made the last adjustment I would click off the subpath I'd been editing and then right-click and choose Stroke Path, thereby applying the stroke to each of the paths. (If I don't deselect the last sub-path I was working on, the only option I get on right-click is to stroke that sub-path.)
In CC, once I click in a blank area to deselect the sub-path it also deselects the Layer (removes the highlight from the Layer in the Layer Panel), so most of my right-click options are greyed out. I have to move back over to the Layer Panel and reselect the Layer I want to apply the strokes on.
It's possible that my old approach is bad and I should feel bad, and this added step of having to re-highlight the Layer in the Layer Panel is the bestest thing ever, but I'd kind of like to be able to avoid that additional step. That is, I'm assuming that this is somehow a feature and not a bug.
If there's no way around having to reselect the Layer after deselecting the sub-path (or after clicking on a blank area with the Direct Select tool in general), in the alternative, is there at least a quick way to select all of the sub-paths at once without losing Layer focus?
Since version X4 I sometimes have the problem that no layer has the focus anymore. So no layer is active and then I cannot select any tool. I never had that befor and I do not like it.
Is that a bug or a new feature which makes sence in some cases? Can I switch that "new feature" off?
I have a type layer with some text in it (a headline, let's say). I click on the layer, I click on the Character Panel, and first thing I see is the color in the Panel is not the color of the font in the layer.
I then click on any Panel property, and the text in this layer is replaced by text from another layer in my document ( a paragraph layer, let's say), but the color is not the same as the layer the text came from.
Is there a way to cut pixels from one layer and paste them to a selected layer (as opposed to pasting the pixels to a new layer which is created by PhotoShop)?
Also, is there an easy way to make sure that the pasted pixels remain in their original position with respect to the overall canvas? I'm simply trying to move pixels from one layer to another layer while maintaining the position of the original pixels.
I've got a Photoshop file that someone wants me to use as a template. It has an existing layer that I need to put a picture into without modifying the layer or creating a new one.
Whenever I cut and paste a picture into it, the pasted picture becomes "Layer 1" but I want it to paste onto a layer which is already there (rather than become a new layer).
I've got a Photoshop file that someone wants me to use as a template. It has an existing layer that I need to put a picture into without modifying the layer or creating a new one.
Everytime I add a picture it comes up as a new layer. How can I add it to the existing one?
I have 2 layers. One is a photo, and the other is a black and white layer I want to use as a mask for the photo.
View 6 Replies View RelatedIt appears that the Layer Filters functionality is broken again with 2013. Unchecking the "Apply layer filter to layer toolbar" disables the function of layer filters in the tool palette.
View 5 Replies View RelatedI can no longer drag and drop photos within photoshop elements 12. When working with a layer, I want to move it to a layer within another existing file, and no longer have the option. The only way I have fixed the issue in the past is uninstall and reinstall the program. I've read other forum posts and followed the instructions by resetting preferences and it does not work.
View 8 Replies View RelatedI have found that when I use the Layer Styles on one layer and then make a new layer or select a shape that creates a new layer that when I go to add Styles to the new layer/new shape the previous layer is affected by how I set the Bevel & Emboss, Direction, Altitude, Drop Shadow etc etc.
For instance, let's say I have a ...
BG > New Layer > draw an ellipse and then add a Bevel with an > Angle of 89 and an Altitude of 30 and then I add a New Layer > open the Styles and go to change the Angle to say +89 or whatever and the Altitude to say 45 ... the first Layer/Shape Effects change.
How I can keep one Layer from being affected by an other Layers Effects'?
I have found that if I Rasterize a Layer Effect that I can add a "double" effect on the same layer but I haven't tried the to do this with separate layers. However, for most of the work I am doing I cannot use the Raster because everything needs to be true vectors.
I have a Dell Laptop/Windows 7 Home Premium that's a 64 bit
Is there an way that I can get an new layer that I create to be frozen in all existing viewports on my drawing. I know you can freeze an newly created layer for all new viewports but that does not solve the fact that the new layer will show on all existing viewports.
View 5 Replies View RelatedI have a psd file with several layers that includes a mask (filled in red) which is what I want to use as the shape of the image. Every tutorial has a different way of creating a mask but I can't figure out how to do it when the mask is a layer within an existing file. There's no option to save the mask to disk so I can load it into a new raster image to merge it with the image.
View 9 Replies View RelatedI have a five-frame animation to which I would like to add a background and I don't have enough GIMP knowledge to do it myself, so I've been trying to use the merge-anim script (URL...). When I use it under Debian Linux, with GIMP 2.6.10 (I have also tried it with GIMP 2.6.11 under Windows 7) however, it gives two error messages.
The first is "Plug-In 'Merge layer with others' left image undo in inconsistent state, closing open undo groups."
The second is "Error while executing script-fu-merge-anim: Error: not enough arguments."
The merge never does occur.The script doesn't have any real instructions and I haven't seen any anywhere else (just a number of example results that don't show the steps take), so my first attempt was with all the default values that came up and then other attempts were with changes to various options. None of them made any difference. The error messages were always the same and the script-fu console did not show any messages.
Do any of you know if this script, as old as it is, even still works with GIMP 2.6.10, or is it just a completely dead project that would only work with older versions of GIMP?
If it SHOULD work with GIMP 2.6.10 for Linux or GIMP 2.6.11 for Windows, what I should do to fix these errors and get it to work properly.
If there's no hope for the script, how DO I make a "background" layer the background for each frame of an existing animation. Also, if it makes any difference, the background I'm trying to use is a gradient created by GIMP.
I'd like to be to select a layer groups and copy them over to another pre-existing image.
I've been struggling with this for an hour or so, and I haven't found a way to do this.
Is is possible to do this in GIMP?
The closet I've found is a kind of paste where you do this: drag the tab of the origin image over to the tab of the target image. The result is a new layer in the target image called "dropped buffer". However, the entire origin image is imported flattened.
I've been trying other drag and drop operations, but without success. Usually when I drop the selection to the target image, the icon under the mouse dissapears, and nothing actually happens.
I thought this might be a window manager problem. But I get the same results across kde, gnome and xfce.
Note Layer > Duplicate will not work in this regard, because I want to copy one group of paths/elements from one layer to other existing layers, not to a new layer.
I have not found a command for this, nor have I found any scripts. Note I'm using CS3 but have been thinking about an upgrade.
It looks like a thumbnail in center of layer with the box thing around it...And the paper I'm placing on is 12x12 or 3600x3600px.
View 2 Replies View RelatedI'm adjusting a photographic image and am using both a filter effect and a layer style in the same layer on a Smart Object. I want to separate the two effects into two layers, so one layer has the filter effect (Nik) and one layer has the layer style (Color Overlay) (with the goal of merging/rasterizing the Nik filter effect with the Smart Object but keeping the layer style unmerged). I can make two layers and move one effect without problem, but the visual result of each effect on a separate layer is quite different from having both effects in the same layer. The Blend Mode for all my layers is Normal. Within the Color Overlay panel, the blend mode is Linear Burn.
Layer 1: a layer style and a filter effect, stacked
looks very different from....
Layer 2: a layer style
Layer 1: a filter effect
I have two maps of same area (different years) and I want to match them up as one map. I can load them both as layers and make the older map transparent so that I can see through to newer map, but older map is larger than the newer map (in the background). I can move the transparent map but I cannot make just the transparent map smaller to fit over the other map. I will also need to rotate the map slightly. When I try to resize it changes both maps. I have tried the transform and the move tool. So how can I make one layer smaller and rotate it it leaving the other layer intact?
View 2 Replies View RelatedIs it possible to lock a layer within a document and password protect that specific layer?
View 3 Replies View RelatedI made a wax seal on Photoshop with a lot of embossment, bedevilment and a Smart Filter. It's done and I just need to make it smaller so it fits well on my certificate. When I resize it (Ctr + T) It pops up a message that reads:
______________________________________________
Adobe Photoshop CS6 Extended
"Smart Filters applied to layers contained in this group will be turned off temporarily while the transform is being previewed. They will be applied after committing the transform."
OK
[] Don't show again
______________________________________________
I click OK and I re-size the layer with free transform, and then hit enter. The Layer is resized but my Smart Filter which creates a wavy affect around the seal is totally distorted.
How do re-size my layer with smart filter without affecting the smart filter aspect of the layer.
What I want to do is to have an adjustment layer that is a reversed, black and white image. I initially thought to merge B&W and reverse adjustment layers, but read that an adjustment layer may not be the target of a merge. Is the way to accomplish this to fiddle with the B&W adjustment layer sliders somehow?
I like how the black and white displayed image of a given color channel looks, how can I export that channel into a layer?
"could not complete your request because layer is not a vaild text layer" ?
View 1 Replies View Relatedi double click my layer (its a text) and it just select the text and the window doesnt appear what do i have to do
View 2 Replies View Relatedthe key functionality lost is the ability to use the previous layer mask for a new layer
View 1 Replies View Related