I'd like to have/write a lisp to change all objects on layer "0" to layer "PC - Module"
If possible also;
save the document close the document open next in directory run layer changer program again.
Can I have a lisp to select all objects in the layer "Defpoints" (including model and paper space, and including objects inside blocks) and change the color of those objects to color 30?
View 7 Replies View RelatedSay I have 2 items, one is on layer "M-Duct" and the other on "M-Pipe" (they are in the same drawing). Any lisp routine that would create the layers "M-Duct-New" and "M-Pipe-New" (based on the same color and LT as the original layers) and then move those objects to the newly created layers?
View 9 Replies View Relatedlisp..It work fine but just that i need some minor modificatio to it...At moment, when i activate the lisp, it will automatic select all dimension,leader and multileader to a layer call "DIMENSION"...Anyway i wonder if it is possible to prevent any dimension,leader or multileader in layer "Section" will not be change to layer "Dimension"?
View 2 Replies View RelatedHow can I get the layer that an entity is on. I have tried numerous method but they don't seen to be retrieving the layer information.
View 8 Replies View RelatedI need a LISP that create a new layer and ask me for the name and the other properties (color,lw,lt..).
ask me if I want move the selected object for the new layer (yes is the default value)
I find that the command to move objects to a different layers runs very slow in one of the drawing. I want to find out what wrong with the drawing and how to speed things up.
I have a LISP program that batch processes a large number of drawings. One of the step to process each drawing is to change the colors of some objects according to the status of the objects. I do this by moving the objects to a later that has the right color. So far the program only takes 2 to 4 minutes to process each drawing. But the program takes close to 90 minutes to process one specific drawing. I track down the problem has to do with the command that moves the objects to the right layer, like this:
(vl-cmdf "_.chprop" (ssget) "" "_layer" "ABC-Prod-Good-Pcs" "")
This command takes a very long time to finish, like 40 minutes each time it runs (to move 1200+ objects), and the program needs to run it twice for a total of approximately 80 minutes.
Please note that the drawing itself is not the largest drawing, and it doesn't have the largest number of objects to be moved either. It is close to the top-5 drawings in term of drawing size and the number of objects to be moved. I cannot say that the drawing size or the number of objects to be moved are the cause of the problem.
I tried to "speed up" by moving 200 objects incrementally. That didn't work. I tried to "speed up" by moving 100 objects incrementally and saving the drawing after each 100 objects are moved. That didn't work either; actually the speed is slightly slower than simply moving 1200+ objects all at once.
I don't know what to do. I believe there may be something unusual about that drawing. By the way, the reason why I choose to change color by moving objects to a different layer has to do with the fact that I have found this is the best way so far. I tried to change the color of the objects directly. But I find that the color of some sub-parts of the objects are not changed (because their color is by-layer). That's why I choose to change color by moving objects to a different layer.
How I can check the drawing, any different way to change color that is better.
I would like converting all objects that has forced linetype to be on a linetype layer.
So if there are objects that have forced linetypes - dashed/hidden/phantom, etc., those entities would be moved to a linetype layer based on their forced linetype. The entities would all be changed to color bylayer, linetype bylayer.
So if there is a rectangle that is sitting on an EQUIPMENT layer, the routine would put that rectangle on a new layer called DASHED and change its forced linetype to BYLAYER.
Lastly, once that's done, the next and final step is to locate a the existing layers with matching linetype - say, OBJECTS with DASHED as a linetype, and merging it to that layer.
lisp program to delete all objects in a drawing based on Layer excluding one layer objects.
in AutoCAD.
Example : I may have 10 layers in a drawings like 1 to 10. I need to delete all objects on 2 to 10 layers.
Is there a LISP code for disabling OSNAP for specific objects or layers? An automatic disable for multileaders would be useful when fine tuning the text placement. Trouble is you need the snap for the leader end. Maybe you could disable the snap for the text grip only.
View 1 Replies View RelatedLisp that can select all hatch in a drawing with a layer called AELE, even if it is embedded in a block and change it to layer AHAT with Green colour?
The layer AHAT may or may not already exist in the drawing.
We need to run the lisp on a lot of drawings (exported from Revit) so I need to use the script to run this lisp on multiple drawings.
I have been filtering through this descuession group for a whil this morning looking for what I need and have found somethings that are close but haven't managed to change them a little to do what I am wanting..
I have drawings with a block named UG101 and has been inserted on all sort of different layers.
What I would like to do is run a lisp routine that would select all blocks with the name UG101 and put them on the layer CableInfo.
I have many other blocks that i need to do the same to but with different names, so I was hoping, I could change the lisp routine around to do the rest of the blocks in the drawing..
I have the following Lisp command that changes a selected layer to a different layer. I have tried modifying it change known layer names to different known layer names. i.e run routine and it changes layer "2" to "3" then changes layer "dim" to "dims" ect then stops.
View 5 Replies View Relatedwondering if is possible to have a lisp routine to:After use the INSERT command, the routine will automatically change the layer of the inserted block to a specific layer according of its name.
i.e.
Step 1 : I will insert a block named Block A using the normal autocad INSERT command (I do not want to insert the block without the Insert window dialog box)
Step 2 : After the insertion, the routine will select the last insertion (or the last object, or any other best way to select this block and will take it's name)
Step 3 : The routine has a list that says:
(If the last insertion (or object) is named Block A, put it in the layer Layer A with color Bylayer and linetype Bylayer)
(If the last insertion (or object) is named Block B, put it in the layer Layer B with color Bylayer and linetype Bylayer)
and so on... I can make the approprieated list by myself folowing my standards.
I think it will be nice to avoid an error if the block is not in the list. So:
(If the last insertion (or object) name is not in the list, do nothing)
To finish, it will be nice to create the layer if it does not exist. Also, Unlock, Thaw and Turn on the layer if it's Locked, Frozen or Off.
I need to do three things in a LISP routine for around 200 drawings. First, I need rename lots of old layer to new standard layer name, like change layer name "CL-RAILWAY-0" to new layer name "CL-0".
Secondly, I need translate some layer to standard layer, like all the things on layer "CL-WATER-160" to layer "CL-0"
Last, change some linetype, like change linetype"CENTER" to "CENTERLINE". I can do all those things by "CHECKSTANDARD" manually, but I really need someway faster and easier.
how to write a lisp that when i activate it, it will change all the objects in the drawings to be change to "Layer 0" and all linetypes "Dashed" change to be "hidden"...
View 9 Replies View RelatedThis is in regards to the LIP command in Toolpac. The layer properties for a selected nested object (LIP) used to default to nested. Now you have to select nested from the list of options. Why they would change LIP. My whole company had gotten so used to it.
View 4 Replies View RelatedI'm looking for a lisp that will change all the layer colors of selected xref by clicking the xref and select color from the color table palette. I have a routine that would change the layer color of a selected entity other than xref.
;;Changes selected object layer to a true color
;;of chose from a dialog
box
(defun c:cvc (/ ent ent_data rgb str objlay)
(setq ent
(entsel)
)
[code]....
I am using 2011 Civil 3D and there is a bug I am trying to get a workaround for. If your drawing is not closed with layer 0 being the current layer several different civil 3D entities assume the color of the current layer of xref'd drawings.
From my reading it appears I need a reactor to thaw layer 0 and make it current before close or exit commands. I am not a programmer and have struggled making this work.
I am looking for a lisp routine to search the layer table to find a particular layer color and change color.
View 9 Replies View RelatedI want to change all pline in drawing to a specific object color (color 253). My code is not working & my brain is not functionning properly today...
(DEFUN C:TR() (SETQ ALL_PLINE_IN_DRAWING (ssget "_X" '((0 . "LWPOLYLINE")))number_of_pline_in_dwg (sslength ALL_PLINE_IN_DRAWING)entity (ssname ALL_PLINE_IN_DRAWING 1)data (entget entity)new_LAYER (list(cons 62 253))data (append new_LAYER data))(entmod data));END OF DEFUN
I need to be able to grab all polylines and change global width at once. This is a repetitve task that i have created a button for. I am trying to use this but it is not working. It gets hung up on me wanting to manually select the polylines when i thought i grabbed them with the first line.
(ssget "X" '((8 . "LayerName")))
(command "PEDIT" "w" "9")
Is there a tool out there that will allow me to pick an object and change it's layer properties?
View 9 Replies View RelatedI have 2000+ drawings that have either the layer state "LMAN_DWF" or "DWF". I want all of them to read "DWF" for scripting purposes. LSIP routine that will go into a drawing and change rename a layerstate if it is named incorreclty, but do nothing if it is named correctly?
Does Layer State "DWF" exist?
If Yes, skip file and move on to next file
If No, does Layer State "LMAN_DWF" exist?
if Yes Rename Layer State to "DWF"
If No, skip file and move to next file.
Or a LSIP routine that can simply dump a list of all drawings in a directory that contain "LMAN_DWF" as a layer state. I could then use that list to do a simple script to change the layer state names on those specific files.
URL....i need a liitle bit change as my latest comments in that topic. I dont want to change defpoint layer to layer 0.
View 9 Replies View RelatedI want a lisp to change all object colours from bylayer to its color Example (if layer doors its color is blue the color of objects drawn in this layer will by blue not bylayer)
View 9 Replies View RelatedI have a library that has a primary folder with 11 subfolders. If the LISP can go through all the subfolders, that would be great. But, if it cannot, I can work with going into each subfolder and running the routine. There are over 12,000 files and I don't have the time to open each one and change the color.
Here's what I need the LISP to do:
open the drawing
select everything
change the color to "bylayer"
save
close
open next drawing in folder and repeat
Once it gets to the end of the folder it can stop.
Possible to link an xref layer and local layer so they display the same (eg. sync viewport colour, linewieght, line type)?
I insert xref's for my base drawing but legend is on local layers and I would like to be able to ensure that the line colour and linetype always match...
I have a customized button to draw an ‘ac-arrow’. I created a lisp to create the layer “G-ANNO-LEDR”
if the layer name is not found. The advanced part I would like is:
Current layer: E-ANNO-WIRE
Ac-Arrow Leader: G-ANNO-LEDR
OPTION 1:
If, say I am on current layer “E-ANNO-WIRE” and need to draw my “ac-arrow” leader, and continue working
on the original layer “E-ANN-WIRE” (and have the leader be drawn [remain] on the layer “G-ANNO-WIRE”).
With this option, I have the block “ac-arrow” imbedded in my template drawing file to have the block at hand.
With this option, the layer “G-ANNO-LEDR” will be created IF it is not on the drawing.
OPTION 2:
- Currently be on layer “E-ANNO-WIRE”
- Bring in the block “ac-arrow” from my block library “L:AutoCADSymbols”
- Draw the “ac-arrow” leader which will be on layer “G-ANNO-LEDR” (this layer created IF it is not
on the current drawing).
- After the leader is drawn’
- Be put back to the layer I was, “E-ANNO-WIRE”, and continue working.
The OPTION 2 is what I would really like to have. A while back, I happen to see one like OPTION 2, but I cannot
find it anymore on the users groups. I have been searching for a while now.
Currently, I use the button in my customized toolbar (see image) and have to have the “ac-arrow” block in my drawing and have its layer created in the drawing.
Is there any way with a click of a button by using LISP, it will change all the selected object to be changed to a pre-set layer...
Example, after i select a certain entities in a drawing, with LISP, it will change all the object to layer "0"?
Additionally, u also need it to change all selected entities that are in "dashed" linetype to be change to "hidden" linetype..
I'm attempting to create an easier way to change layer colors of nested linework by selecting the linework and having the ACAD index color dialog box appear to select the replacement color.
defining the "ic" variable;
(defun c:clc (/ ent ent_data ic ent_lay) ;change layer color(setq ent(nentsel)) (setq ent_data(entget(car ent)))(setq ic ;index color(cdr(assoc 62(ACAD_COLORDLG))))(setq ent_lay(cdr(assoc 8 ent_data)))(command "-layer" "c" ic ent_lay ""))