AutoCAD Visual LISP / AutoLISP :: Routine To Change Layer State Names
Nov 2, 2011
I have 2000+ drawings that have either the layer state "LMAN_DWF" or "DWF". I want all of them to read "DWF" for scripting purposes. LSIP routine that will go into a drawing and change rename a layerstate if it is named incorreclty, but do nothing if it is named correctly?
Does Layer State "DWF" exist?
If Yes, skip file and move on to next file
If No, does Layer State "LMAN_DWF" exist?
if Yes Rename Layer State to "DWF"
If No, skip file and move to next file.
Or a LSIP routine that can simply dump a list of all drawings in a directory that contain "LMAN_DWF" as a layer state. I could then use that list to do a simple script to change the layer state names on those specific files.
View 2 Replies
ADVERTISEMENT
May 21, 2003
I am looking for a lisp routine to search the layer table to find a particular layer color and change color.
View 9 Replies
View Related
Feb 20, 2013
i have a small lisp and i would like for it to:
when i invoke the plot command, it will first check if there is a layer state called "Temp"if "Temp" exists, then delete "Temp", then re-create "Temp", then switch layer state temporariliy to "Plot" to plot the file, and then switch back to the "Temp" layer state againbasically, the "Plot" layer state will be set based on how the drawing(s) will plot. if a user makes changes here-n-there in the drawing, when the user wants to plot, the software will save current state as "Temp", plot using the "Plot" state, and switch back to "Temp" state at the end. all i am trying to achieve is to somehow over-write the "Temp" state. below is the LISP.
(command "undefine" "plot")
(defun clot ()
(if (layerstate-has "Temp")
(layerstate-delete “Temp”)
)
[Code]....
Civil 3D 2013 SP1, Win 7-64 bit
12GB RAM
View 9 Replies
View Related
Dec 16, 2011
I would like to make an on screen layer picker routine that sits in the upper left corner of the screen and always stays there.
I currently have a list of layers printed out in the drawing that I can do a "select current layer by pick" but they are always getting in the way as they are part of the drawing.
I would mind if the pallette was part of the drawing if it could "float" and always stay in the upper left corner somehow.
View 2 Replies
View Related
Jul 31, 2012
A quick way to apply a Layer State to multiple DWGS?
View 4 Replies
View Related
Dec 30, 2013
Is it possible to change the system variable "TEXTSIZE" with an autolisp routine? I have hundreds of drawings that have varying textsize settingings and I can't get it to let me change it, unless I go into "Style" and manually change the value to "0" before I run the routine, and there are simply too may drawings to do that everytime. So, is there a way to reset the textsize to 0 through Lisp?
View 5 Replies
View Related
Apr 17, 2012
We are trying to update our company logo on hundreds of autocad drawings, any lisp routine or a better way to get this updated. We are trying to update our title blocks that have company logo in it and want to change the logos to the new one.
View 1 Replies
View Related
Apr 26, 2013
Creating either a Lisp or a script to change the pen weights of two layer in autocad 2011?
View 9 Replies
View Related
Aug 1, 2012
I am trying to write a lisp routine that will make a layer called hatch, set it as current and then run the hatch command.
BUT the hatch command is not bring up the hatch dialogue box, it just puts things on the command line.
The layer is being made & set current.
The lisp is as follows:
(defun c:hh (/ ec)
(setq ec (getvar "cmdecho"))
(setvar "cmdecho" 0)
(command "-layer" "m" "hatch" "c" "8" "" "l" "continuous" "" "s" "hatch" "")
(command "hatch")
(setvar "cmdecho" ec)
)
On another matter, I have just found the bevel lisp routine by Terry Miller which works great BUT only for imperial measurements. How to make Terry's metric, that will work for metric measurements.
View 6 Replies
View Related
Nov 1, 2013
I have 4 Dynamic Blocks with the same name, but each are on different layout pages. I need to change the visibility state of all 4 to the same value. So far every attempt of mine has failed.
My process at this point is to: build a selectionset of all 4 Dynamic Blocks with the same effective name, convert the selectionset to a list of entity names, then use a foreach to change the visibility states one at a time. Currently, I get "error: bad argument type: lselsetp <Entity name: 7ffff7b6c90>". <Entity name: 7ffff7b6c90> is the entity name of the first block in the list. I'm guessing it's because the block is found on a non-current tab
(defun chgdynprop (e propname newval / obj v vval sal tot i) (setqobj (if(= (type e) 'vla-object) e (vlax-ename->vla-object e))) (if (= (vlax-get-property obj
View 3 Replies
View Related
Aug 8, 2013
we have a good size project going on with lots of view ports of a base map (floor plan or site plan). Then we set the viewport layers the way we would like it, but along the way, we keep getting updated base maps (floor plan or site plan) with new layer created in them. These newly created layers are for the originator and will not affect our project.
Is there a way to have our project set to ignore any newly created layer from the originator of the base files? That is, we have our project (viewport layers) set the way we want it. When we get an updated base file, replace the xref(s), our layer state will still be the same, ignoring any newly created layer, automatically. I sure hope I am clear enough here.
Our problem is that when we get a new base file, then we would have to go to every file that has a viewport related to this new base file and turn off the new layers.
AutoCAD 2014
View 1 Replies
View Related
Nov 8, 2013
I'm creating a drawing set that has over 100 sheets with varying amounts of viewports on each sheet (from one to four). Each sheet is its own file, so there is only one layout per file. For each section of the drawing set, the viewports will have the same layer state.
Is there were a way to update the layerstate of each viewport through a batch LISP routine? This would save me DAYS in opening each file, importing the layer state, and restoring it for each viewport. It seems straight forward, but I have no idea where to start with batch routines.
View 4 Replies
View Related
Jun 17, 2012
I need to change the value of some tags in a title block on multiple drawings. I tried using Lee Macs attribute changer [URL]. It works fine but not when tags have the same name.
I then looked at this code - [URL]
Idea was to change the tag names then use Lee Macs program. It too fails when there are duplicate tag names. It changes all tags not just the one I want.
In the the title block I have 3 tags with the name "NAME" but only one will have the value I'm looking to change. If I could place an IF statement some where in the above codes (or another code altogether) to instruct that IF the tag name is "NAME" with value "Dennis (BSL)" then change either the tag name or the value to "Daniel"
Im pretty bad at this programming stuff but with so many drawings I need a easier, automated way of doing this.
View 1 Replies
View Related
Apr 17, 2012
lisp..It work fine but just that i need some minor modificatio to it...At moment, when i activate the lisp, it will automatic select all dimension,leader and multileader to a layer call "DIMENSION"...Anyway i wonder if it is possible to prevent any dimension,leader or multileader in layer "Section" will not be change to layer "Dimension"?
View 2 Replies
View Related
May 31, 2012
I'd like to have/write a lisp to change all objects on layer "0" to layer "PC - Module"
If possible also;
save the document close the document open next in directory run layer changer program again.
View 8 Replies
View Related
Oct 11, 2012
I'm trying to write a lisp routine that, when I invoke the mleader command, osmode is set to "nearest" & orthomode is set off. I then would like the original settings to be returned.
attached is what I have written so far:-
View 4 Replies
View Related
Nov 7, 2013
Lisp that can select all hatch in a drawing with a layer called AELE, even if it is embedded in a block and change it to layer AHAT with Green colour?
The layer AHAT may or may not already exist in the drawing.
We need to run the lisp on a lot of drawings (exported from Revit) so I need to use the script to run this lisp on multiple drawings.
View 3 Replies
View Related
Jul 25, 2006
I have been filtering through this descuession group for a whil this morning looking for what I need and have found somethings that are close but haven't managed to change them a little to do what I am wanting..
I have drawings with a block named UG101 and has been inserted on all sort of different layers.
What I would like to do is run a lisp routine that would select all blocks with the name UG101 and put them on the layer CableInfo.
I have many other blocks that i need to do the same to but with different names, so I was hoping, I could change the lisp routine around to do the rest of the blocks in the drawing..
View 9 Replies
View Related
Feb 6, 2012
I have the following Lisp command that changes a selected layer to a different layer. I have tried modifying it change known layer names to different known layer names. i.e run routine and it changes layer "2" to "3" then changes layer "dim" to "dims" ect then stops.
View 5 Replies
View Related
Nov 21, 2013
Basically, the routine asks for the user to choose the hatch type (Retirer/Percer), then the layer (Defpoints/Select/Current) and finaly the type of the object to draw (Polyline/Rectangle). My original routine has also a Circle and a Boundary options, and an Error trap to reset the variables but I will keep it simple for the purpose of my issue.
So, my issue is: when I choose the type of object to draw, it draws just one of it and the routine ends. I would like to have something that "says" to the routine that I want to keep drawing that object (Polyline or Rectangle) and putting the hacth inside until I do enter and then the routine goes to its end.
View 9 Replies
View Related
Dec 10, 2012
I have created an acad.lsp file in where I want to arrange all our company settings. I've stored it on the network to make sure everyone will use the same one and when updates take place I don't have to run past all pc's to change it. I've set everything in the deployment package but users can still change it when they reset their profile. Plus some pc's are already installed with AutoCAD before creating the lisp routine, how can I enforce the support directory to check on the network for the acad.lsp each time?
View 9 Replies
View Related
Oct 16, 2013
with the mouse I can select objects on the screen and then start a command that uses these objects.
How can I perform this in lisp?
I can create my selection set, that's no problem, but how can I 'make it active' for an external function?
(ssget "_C" p0 p1 '((0 . "TEXT")))
???
(c:txtexp)
View 2 Replies
View Related
Mar 7, 2013
wondering if is possible to have a lisp routine to:After use the INSERT command, the routine will automatically change the layer of the inserted block to a specific layer according of its name.
i.e.
Step 1 : I will insert a block named Block A using the normal autocad INSERT command (I do not want to insert the block without the Insert window dialog box)
Step 2 : After the insertion, the routine will select the last insertion (or the last object, or any other best way to select this block and will take it's name)
Step 3 : The routine has a list that says:
(If the last insertion (or object) is named Block A, put it in the layer Layer A with color Bylayer and linetype Bylayer)
(If the last insertion (or object) is named Block B, put it in the layer Layer B with color Bylayer and linetype Bylayer)
and so on... I can make the approprieated list by myself folowing my standards.
I think it will be nice to avoid an error if the block is not in the list. So:
(If the last insertion (or object) name is not in the list, do nothing)
To finish, it will be nice to create the layer if it does not exist. Also, Unlock, Thaw and Turn on the layer if it's Locked, Frozen or Off.
View 9 Replies
View Related
Jun 24, 2009
I need to do three things in a LISP routine for around 200 drawings. First, I need rename lots of old layer to new standard layer name, like change layer name "CL-RAILWAY-0" to new layer name "CL-0".
Secondly, I need translate some layer to standard layer, like all the things on layer "CL-WATER-160" to layer "CL-0"
Last, change some linetype, like change linetype"CENTER" to "CENTERLINE". I can do all those things by "CHECKSTANDARD" manually, but I really need someway faster and easier.
View 9 Replies
View Related
Mar 9, 2012
how to write a lisp that when i activate it, it will change all the objects in the drawings to be change to "Layer 0" and all linetypes "Dashed" change to be "hidden"...
View 9 Replies
View Related
Nov 11, 2013
This is in regards to the LIP command in Toolpac. The layer properties for a selected nested object (LIP) used to default to nested. Now you have to select nested from the list of options. Why they would change LIP. My whole company had gotten so used to it.
View 4 Replies
View Related
Aug 14, 2009
I'm looking for a lisp that will change all the layer colors of selected xref by clicking the xref and select color from the color table palette. I have a routine that would change the layer color of a selected entity other than xref.
;;Changes selected object layer to a true color
;;of chose from a dialog
box
(defun c:cvc (/ ent ent_data rgb str objlay)
(setq ent
(entsel)
)
[code]....
View 5 Replies
View Related
Feb 25, 2011
I am using 2011 Civil 3D and there is a bug I am trying to get a workaround for. If your drawing is not closed with layer 0 being the current layer several different civil 3D entities assume the color of the current layer of xref'd drawings.
From my reading it appears I need a reactor to thaw layer 0 and make it current before close or exit commands. I am not a programmer and have struggled making this work.
View 9 Replies
View Related
May 30, 2013
Can I have a lisp to select all objects in the layer "Defpoints" (including model and paper space, and including objects inside blocks) and change the color of those objects to color 30?
View 7 Replies
View Related
Sep 24, 2013
I want to change all pline in drawing to a specific object color (color 253). My code is not working & my brain is not functionning properly today...
(DEFUN C:TR() (SETQ ALL_PLINE_IN_DRAWING (ssget "_X" '((0 . "LWPOLYLINE")))number_of_pline_in_dwg (sslength ALL_PLINE_IN_DRAWING)entity (ssname ALL_PLINE_IN_DRAWING 1)data (entget entity)new_LAYER (list(cons 62 253))data (append new_LAYER data))(entmod data));END OF DEFUN
View 8 Replies
View Related
Aug 12, 2012
I want autolisp program to check overlap like in closed or open polyline with any other entity in the drawing, whether other entity is overlapping inside the polyline or not, i am beginner in autolisp and want to know exactly which functions are used or the program itself Also if possible to check circular overlap of one polyline with itself.
View 1 Replies
View Related
