Photoshop :: How To Change Color In Existing Gradient On Existing Image
Mar 25, 2013
I have an image which is simply a one color gradient, with transparency from nothing to something. I would like to be able to access the existing gradient on the image and change only the color. I have hunted high and low and cannot see how to do this.
(I am familiar with how to make a new gradient and how to change the colors in a saved gradient via the gradient dialogue. But for the life of me, I can't see how to access an existing gradient on an image and change only this one parameter.
View 9 Replies
ADVERTISEMENT
Jan 10, 2013
I am unable to add a gradient to an image. I do the following:
-Select a gradient (I just selected a default gradient to start off with)
-Then I select a region of the image that I want to apply the gradient to (I use the rectangle select tool)
-Then I switch back to the gradient tool
-Then I hover the cursor over the selected region of the image. This is where I expect to be able to click the mouse down and drag to create the gradient. However, when the cursor hovers over the image the cursor turns into a black circle with a line through it (which obviously is telling me "no, you can't do this"). Obviously, when I click and drag, nothing happens.
View 3 Replies
View Related
Dec 4, 2013
I have a plain rectangle with overall c09300c0 RGBA levels.I want to change the alpha channel value from c0 (193) to some other value, for the whole image at once. Or some other color channel.
How can I change the absolute value of a channel ? The color menu has only relative adjustments.
View 1 Replies
View Related
Dec 7, 2012
I have installed LR 4.2 two days ago, and have run into a serious problem. When in develop mode, when I click on an image in the film strip, LR opens the image and changes the color temperature dramatically. The blue/yellow slider moves to the far left. I think this is the only change, but didn't check.
The action is not in the history, so I cannot undo it. When I quit and restart, the change is still there. There is no way to recover the pre-existing setting. Can I convert my catalog back to 3.6?
View 10 Replies
View Related
Sep 28, 2012
I'm trying to create an all new existing surface over existing ground. I have a TIN surface of the EG, and I have drawn overlay splines that describe the new surface, but how to go about creating that design surface.
It is a compound surface, open on one end and closed all around on the other, somewhat like a half of a football stadium, but with an irregular upper edge because I am needing to figure out cuts and fills to manipulate the EG into this new surface without costly major terraforming. There is about 40-50' vertical elevation between the "field" and the upper rim with a generally constant 7-10 deg. slope all around. I'm just at a loss to figure out how to approach this project, and am quite new to Civil 3D.
Civil3D 2013
MacBookPro 17 - 2.4GHz Intel QuadCore i7 (Late 2011 build)
Microsoft Windows 7 64bit
350GB Bootcamp volume
View 2 Replies
View Related
Nov 15, 2012
Some background: We have a composite surface of existing surveyed contours as a TIN pasted into existing aerial contours that we received from a client. We used polylines to generate our proposed contours, and then generated a proposed surface from that. We've made a blank surface, pasted in the existing surface, and are trying to paste in our proposed surface... only the existing contours outside of the proposed suface no longer line up correctly once we do.
We've tried applying the method laid out here: [URL] ........ (and the link referenced in the bottom) but are still having trouble getting the surface to work. We've tried offsetting as little as 0.25' and as much as 5' with the feature line draped over the existing surface, but it seemed that the greater the offset, the greater the discrepancy.
Just to make sure we even tried that correctly - should the breaklines that we add be standard or non-destructive? (I've tried it both ways with little success either way, so I don't know if it matters much in this instance, but perhaps for future reference it would work.)
I've attached a screen shot of our surfaces. The pink and green lines are the proposed contours, the white dashed are the existing. The outer red line is offset 0.25'. As I've mentioned, we've tried offsetting various amounts with decreasing success.
View 9 Replies
View Related
Nov 26, 2012
I notice that on my people keywords tags 13 of the tags have thumbnails and 4 do not. I have always had "show people recognition" turned on.Can I add a thumnail to the people tags which do not have one?Can I change an existing thumbnail on a people tag?
View 1 Replies
View Related
Jun 4, 2013
I am trying to find a faster way to save my images. I shoot in raw, save raw images as jpegs after editing them in Camera Raw. I am using Photoshop CS6 on a Mac version 10.7.5. When I save, I either have to save as a copy of the exisiting image, or replace the image I'm working on. Other forums I've read said to make an action to save and create a function key to make this process faster, but my function keys aren't working, and playing the action I've created still makes a copy of the image.
View 3 Replies
View Related
Aug 30, 2013
I have created an action script where I change the color of the objects in a photo and then have the action automatically save for web as a PNG-24 image. My issue is that the save for web continually overwrites the existing file at that location. Is there anyway to prevent this from happening?
View 7 Replies
View Related
May 2, 2012
CS6 Pen tool, clicking and dragging on an existing path should not change the angle on the adjacent radius handles. It should only dynamically adjust the length of the existing radius handles, based on which direction you drag. It should only affect that one segment and not affect the bordering angles. I've been pathing with Adobe products for 25 years and this should not change now. I want to be able to fine tune ONE line segment without affecting its neighboring segments. The "new" behavior should only occur with a modifier. If the Mothership deems this is the only way to do this moving forward, at LEAST give your long-standing customers a modifier, such as the shift key to enable us to keep working as we have been for decades.
View 6 Replies
View Related
Aug 19, 2008
I have 2 x *.dds files. One is a default model texture (with no alpha channel) and the other is a lightmap, which has different visible graphics to that of the texture file. However, the alpha channel of the lightmap uses the texture file detail.
My question, as I need to recreate these from scratch, how do I import an existing image to another existing image and use it as a alpha channel. So far each time i have tried the original information is overwritten.
Here's a screengrab of what I'm trying to achieve. To recap, I'm trying to use image 1 as an alpha channel in image 2 (as shown)...
View 3 Replies
View Related
Jan 25, 2007
smoothing out a hand drawn image. I have the picture of a tribal tattoo and I'm trying to smooth the edges (they look rough at the minute) so it looks more photoshop-made? But I'm having trouble.
View 1 Replies
View Related
Mar 10, 2012
I've just installed LR4 and I want to change its name. Is this possible without creating a new catalog. I realize I'd have to change all the files associated with the catalog. Operating on a mac.
View 2 Replies
View Related
Aug 23, 2007
I have a few png images (from a PD image disc) on a site I made, and the set came with pretty much all the variants I need. However I find I need an up and down image, but only have a premade up.
What I'm after is a matching down. I do have a blank if thats going to make things any easier.
View 2 Replies
View Related
Nov 25, 2005
I need to add rectangle shapes to an existing image.
I tried using the rectangle tool but each time i click on the background option after the rectangle is drawn, it disappear.
The rectangle will only appear again when i select the rectangle shape from the layer panel.
Is there anyway where i can make the rectangle show on the image?
i tried reading up some of the thread posted and i saw some thread mentioning doing something to the path. How is the path used?
I'm not really familiar with using paths and layers, so i need a really layman's term of explaination.
For more info, i actually set the colour of the rectangle fill 100% opacity 100%.
anyway wat is the purpose of setting opacity?
cos i tried ranges between 0 - 100 and there doesn't seem to have much difference.
View 1 Replies
View Related
Sep 11, 2013
Is there an easy way to change all the model geometry from New to Existing in one easy command? I drew a three story building complete with structural columns, beasms, curtain walls, doors, walls, floors, etc. and I need to now make it all 'Existing'.
View 3 Replies
View Related
Dec 20, 2013
I am trying to color a sketch I made and have thus far (successfully??) created a white background, an ink layer and a color layer. They are in multiply mode. The file I am working with is not GIF or JPEG, it's XCF.
Color is set to 100%, mode is normal. And yes, the image mode IS set to RGB.
I had selected a small color palette and filled an ellipse shape with it. Fine so far. I wanted to make another ellipse within this one and make it a different color. This did not work. I don't know how many options I tried, incl. exiting the program and starting again, to no avail. Somehow (how this worked) ONE additional color worked (very similar to the first). But no black, for example, no green, nothing.
Yesterday I finished a picture (my first attempt using GIMP or any software, at least for art) and I was super happy with the result. It's not working.
View 1 Replies
View Related
Jul 7, 2013
I have an image that is going to serve as an online ad. I would like to have it look like a glass button like so many online ads do these days. However, most tutorials out there give instructions for how to do it with only text over the button. How would I do it if it's got three different sections to it? A photo on the top half and two colors on the left and right on the bottom?
View 2 Replies
View Related
Jun 28, 2013
I need change type for Alignment with NET API. Alignment has property AlignmentType, but this property is read only!
In COM API Alignment not has this property. And with user interface to make it easy!
View 5 Replies
View Related
Oct 14, 2009
I'm chasing the syntax on what i hope is a very simple procedure.
We have a project for re-design and manufacture here (Australia) of a machine that has been designed and detailed in one of our US offices. For this reason, we will be wanting all dimensions in mm etc, rather than inch.
My intention is to open the idw(s), update the styles library (done, i think...), change the active standard to "AS Metric" (got the code sorted for that too), and then change all dimensions to AS Metric.
So far i have each of these 3 processes in a different sub, called from a master. But my problem is in changing the style. I could change a dimension's style to match that of another existing style:
Set oGeneralDimensions = oSheet.DrawingDimensions.GeneralDimensions.Item(1)
but I am having trouble setting is to the active style.
My module:
Sub ChangeStyle()
Dim oIDWDoc As DrawingDocument
Set oIDWDoc = ThisApplication.ActiveDocument
Dim oSheet As Sheet
Dim oDim As DrawingDimension
Dim oDimStyle As DrawingStandardStyle
Dim oGeneralDimensions As GeneralDimension
[Code]....
View 9 Replies
View Related
Apr 22, 2011
it's been a bit tough going getting up to speed with WD6. I find myself running into snags just using the interface and trying to get things done.
At any rate, what I am running into currently is that I have a working toolbar from a template, but I need to change it's colors for both mouse off and mouse over. I saw the video and it makes it look very easy by going into the navbar->properties->menu style and simply select the colors you want. This is having no visible effect for me..
How can I change the colors of my existing navbar? I hope I won't have to recreate it each time I want to change the colors, etc.
View 9 Replies
View Related
Aug 25, 2009
When you're editing a gradient within the shape (as opposed to in the Gradients palette), is there any way to use the eye dropper tool to sample an existing color? In-shape gradient editing (or whatever Adobe calls it) is useless without the eye dropper.
View 24 Replies
View Related
Apr 30, 2013
How can I change the termination of an existing hole feature?
If app.ActiveDocument Is PartDocument Then Dim doc as PartDocument doc = app.ActiveDocument Dim hole as HoleFeature hole = doc.ComponentDefinition.Features.HoleFeatures(1) ...End If
View 2 Replies
View Related
Mar 17, 2014
Lightroom v5.3: I'm a long time DNG file user for Pentax and Nikon cameras. I recently discovered that about 300 of my RAW Nikon files already imported into the Library are NEF files instead of DNG files as my other 5700 files are.
I know that I made an error somewhere along the way, but- Is there an easy solution to converting those existing NEF files to the DNG format?
View 2 Replies
View Related
Jul 1, 2012
Everything I could find here talked about one-time creation of a new 4.1 catalog rather than adding 3.6 catalog to my growing 4.1 catalog. I held off converting everything until I had some time and experiewnce with LR4.1.
Now I have a moment to breathe and can move all the 3.6 stuff to 4.1. I started using Jeffery Friedl's Flickr publish under 4.1 but not 3.6 so no publishing in 3.6. I have no self-made presets so just converting all images to Process 2012 is OK with me. (I know some images will look different.)
View 2 Replies
View Related
Oct 25, 2012
I've wrriten a script that will create custom annotative scales and a new text style. (It works fine up to that point) The next steps I'm trying to add to the script is to select a text object, set it to the new style, make it annotative and add all of the annotative scales to that text object. CHPROP allows me to make the text object annotaive but I haven't found a command that will let me change the style or add annotative scales to the text object. Any commands I can use in a script to do this ? (or know if this is even possible)? I have 2000+ drawings I need to run this one, I hope I can find the commands to script this with.
View 2 Replies
View Related
Jul 21, 2013
I changed from 2012 to 2013 Inventor,
When I open an existing drawing, I have this error msg.
View 4 Replies
View Related
Feb 19, 2013
My primary graphics task is working with application screencaps... mainly masking out private customer information, and sometimes overlaying 'dummy' data in its place. With a drawing program, the process goes like this:Draw a box somewhere near the field I'm masking.Use the color-matching tool to ensure that the box matches the field.Resize and reposition the box to exactly cover the field.(Optional) Repeat this process with a text box to present the 'dummy' data on top. However, my workplace requires us to use Paint, which doesn't support drawing actions like this (moving and resizing objects). Is there some other way to accomplish this task with the tools Paint does have?
View 8 Replies
View Related
Dec 14, 2011
I have used paint.net for small photo touch-ups of my daughters. But now I'm starting a small business and actually starting to use more tools.
I had our logo done by a graphic designer and to save on money I am doing the layouts for ads, flyers, business cards etc. When I copy our logo into a new layer it is super big compared to my canvas size. I cant seem to figure out a way to scale it down in ratio. When I click on the corners it allows me to scale down, but not to ratio. When I select image-resize (Ctrl+R) and do a percentage it cuts off portions of the logo or select by absolute size it wants to change my canvas size.
View 4 Replies
View Related
Mar 27, 2014
When I export an image with existing keywords they showup in the file properties when I open the new image in Windows Explorer. When I re-import that new file back into Lightroom I find that none of the original keywords are visible. This had not been an issue in previous versions of Lightroom.
View 2 Replies
View Related
May 3, 2012
When I try to convert any object to a bitmap, the resolution is highlighted but doesn't workif I want to change the existing resolution. I have to RESELECT the numbers to export to another resolution as if the resoltion WASN'T highlighted.
View 8 Replies
View Related
