AutoCad :: Slow Response After Copy And Pasting?
Jul 31, 2013
When I cut and paste, Autocad lags for up to 30 seconds before continuing to go back to the command prompt. This problem only happens after pasting, whether it is one line or multiple lines/objects. The quantity of data pasted makes no difference to the lag. Also, if it's a new file with nothing in the drawing the issue still happens. The scale list is purged along with the entire drawing, so even on a blank new file it happens?!
I am running autocad 2014 LT and migrated from 2010 recently, where the problem began. I don't have cutting and pasting problems in any other programs like photoshop either, so I have localised it to a cad being the issue.
Also I have tried uninstalling and reinstalling, but this doesn't fix the problem.
I'm running on intel core duo 2, 4gb ram and 64 bit operating windows system.
View 1 Replies
ADVERTISEMENT
Dec 21, 2009
We are having slow keyboard response while typing in CAD 2010. (It happened a little while using 09 as well). We will start typing a command and our cursor will get ahead of what we're trying to type. Our dynamic input is OFF.
View 3 Replies
View Related
Sep 30, 2011
Sometimes when I am in an inventor drawing and I drag one of my views, my computer becomes slow, the cursor starts circling, and I get the (Not Responding) message up top. Why would this be happening?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
View 1 Replies
View Related
Nov 30, 2012
I go to mk, connect my clip to a gmask , double click gmask to focus to that module. I switch to 2 viewport. The left is the schematic, the right is the F1 (front). First when i click the F1 viewport, i got no 'add' button for adding gmask. So i have to first go to view pulldown, just do some unecessary click there to refresh. Now after refreshing, i can see my 'add' button is showed up. But the second problem is : i can't immediately press that 'add' button, there's a lag about 5- 7 seconds before i can click that button.
Also i can switch from mk schematic to f1 or f4 quite fast, but sometime go from any of front/back/matte view back to the mk schematic, it will take 4-7 second even for simple/basic mk network/tree.
The problem won't appear when using single viewport.
View 1 Replies
View Related
Jan 3, 2012
It's a Q6700, 4GB, 2TB drives, Epson R2880 running Windows 7, 64-bit. CS4 is very peppy, runs great, opens, closes, edits, NO PROBLEM.
UNTIL you decide to print. Once you hit the print selection it takes a MINIMUM of 40 seconds for the CS4 print dialog to appear. If you then hit the "page setup" button, it'll be at LEAST another 30 seconds before that appears. Once they're up, you can navigate around and make changes, but once you hit the print button on the dialog it'll be another 10-15 seconds before it responds and if you specify "Print Preview" it'll be at least another 30 seconds before you get the preview. Once it hits the printer, it prints fine. There haven't been any software or hardware changes in weeks, except the weekly MS updates that get installed.
I've tried large images, and small images in case there was something CS4 was doing. This process is this slow when printing a 4x6 greeting card or a 12 x 18 photograph.
What's interesting is this is a new phenomenon... It worked FINE up until sometime last week. Then suddenly, slow....... Concurrently, the print dialog STOPPED DISPLAYING INK LEVELS. The status monitor still displays them, but the printer dialog no longer does.
I've unloaded the printer and cleaned off every file I could find that appeared to be associated with an Epson print driver. Went to Epson and got the latest, Windows 7, 64-bit set of drivers and status monitor and installed that. No difference. Also tried a new USB cable AND switched it to the other USB port on the printer and on the PC. Nothing's made any difference......
If necessary, I can have her re-install CS4, but is there anything that should be done before we start clobbering major applications, or ever worse, the operating system?
View 24 Replies
View Related
Mar 26, 2012
I'm a user of CS5, on a MacPro.
I was so disappointed with the amazing slow response when trying to use the Mixer Brushes; fine when using small files, suitable for web, but when working with larger files intended for large printing, it was painful!! Have the people at Adobe sorted the problem out with CS6?
View 2 Replies
View Related
Jun 19, 2013
In the overlay & sensor coverage file I have created some blocks. all the sensor coverage have dashed lines.
However, when I paste them into another document they partially dissapear and the dashed lines turn solid.
View 4 Replies
View Related
Jun 25, 2013
I have not done this for a while, but I remember you have to click somewhere otherwise all you see is an empty viewport in the new drawing.
View 2 Replies
View Related
Dec 7, 2012
I am having an issue copy and pasting text. Whenever I copy text from a source (word, another dwg) and paste it into a new dwg, it all comes in uppercase. Also everything i type in a new MTEXT is all caps.I do not have caps lock on.
View 2 Replies
View Related
Sep 7, 2012
I am copy clipping some objects, and then pasting them back into the drawing as a block. At first everything worked fine, now when I perform that routine, and paste back into the drawing, it inserts it way off in left field. What parameter did I upset now?
View 1 Replies
View Related
May 26, 2009
Whenever I copy/paste a selection, it 'fades' away the edges, giving it a softer look. I'd like to paste exactly what I copied, the entire edge.
View 3 Replies
View Related
Nov 30, 2008
Iv written text in a word document and copied and pasted it onto a background in photoshop. Now i have a problem because when i dropped the text into PS it said it had rendered the text it and now i cant change any of the text i can add to it but i cant change words that iv either miss spelt or need to remove from the text.
View 1 Replies
View Related
Feb 18, 2011
Every time I try to copy an image (with a transparent BG) and paste it into my overall project I'm working on, both opened in GIMP, I always get just the selected dotted lines as an outline of the image.
View 3 Replies
View Related
Jan 13, 2013
how to copy and paste a portion of a document open in photoshop into another document that is open in photoshop?
i have never been able to figure this out despite trying to do it from time to time and i basically cannot figure out if this is dependent upon actual images size, resolution, the size that the various images are on the screen etcetera, etcetera.
i am not even sure what other questions to ask except that i guess i could avoid all of this if i could copy a section of an image and then paste it into another document in a way that would give me the ability to RESIZE the incoming paste.
i basically want to get a logo into another document in a way that i can size and orient it so it looks good graphically...
View 7 Replies
View Related
Jun 24, 2010
One of our AC08LT workstations is very slow on Copy / Paste command... Not bound to one dwg... Happens with any dwg.
View 4 Replies
View Related
Dec 27, 2012
URL....My logo on the file that i created it in looks perfect. When i create a new, blank AI file and paste it into it, it pastes as a faded version of my logo. I have gone through all the settings i could find between my two files and made them identical, it still happens. When i paste the logo into the same file it was created in it pastes correctly.
View 20 Replies
View Related
Aug 12, 2013
When I copy and paste on Autocad 2012, it goes very slow.
I installed the service pack, I tried removing the layer filters and a few other fixes that are out there. The machine is powerful enough to handle the application.
I tried reinstalling the application and that didn't do anything. The DWG file that's on the network share is being used by other people without any issue, I'm the only one having this problem.
View 3 Replies
View Related
Oct 4, 2011
I think I've got lots of existing files coming with this problem, the file is really slow and I try to use below method but it didn't work, since there's thousands of script "%AI8_BeginPluginObject" in that AI file.. Any other methods I can use so as to fix it.... and I'm using CS5 version, [UR] .....
View 8 Replies
View Related
Oct 26, 2012
the speed of cutting and pasting, as well as saving a drawing in CorelDraw X5 has drastically slowed down.Could it be a Windows issue and not a Corel issue? I have plenty of RAM and I've defragged.
View 2 Replies
View Related
Aug 27, 2012
slow copy to clipboard? I have pinned it down to my virus protection. I use McAfee and I notice that my CPU goes up considerably when I do a copy to clipboard under mcshield.exe. When I turn off the McAfee, copy to clipboard in X6 works fast and perfectly.
View 3 Replies
View Related
Aug 28, 2013
I am using corel X6 64 on a Dell optiplex 9010 intel(R) Core(TM) i7-3770 @ 3.40GHz 3.40 GHz. 8.00GB of RAM. Its taking about 1-2 minutes to copy/cut/open a file/save a file or even publish to PDF. On the same machine Same circumstances but different User i have no problem. I have to use my user because its connected to my email and at this company i cant change that. I have researched many forums and its not color styles or object styles. It does it on a new file with only one object created. I got a new computer signed on to my user account and the problem persists.
View 14 Replies
View Related
Jul 14, 2011
I have a dialog with lots graphic items and the response time for refreshing was very slow, sometime 2-3 seconds. I have re-wrote it so only certain parts update when they are needed,say when a value changes & this has worked, but there is still a very visible lag when re-freshing.
Basically I want to know if there is another less memory consuming process than re-fresh, or can you increase the available memory to the pallet, then dispose of it when completed? Another way I haven’t though of.
View 1 Replies
View Related
Mar 16, 2012
I have noticed that if I start a thread I can edit the posting, but if I respond I cannot edit that posting. How do you edit a response posting?
View 8 Replies
View Related
Jan 17, 2013
after a bindXref i save the dwg in a path 'Archive' but if the file already exist i demand the user if i cant erase the dwg in archive before write my dwg. I want to force the user to close the dwg without save if the reponse is 'No'. (The function have BindXref so the dwg do not save this). No save only for this dwg not the other already open (I not know how to use event so.. and my DLL is not loading on the launch of autocad)
View 3 Replies
View Related
May 14, 2012
For some days when I press the open button or print button on the toolbar, Autocad LT 2008 does not respond until after two or three minutes and opens the window.
I noticed that this only happens when I have enabled LAN. The "plotter" that I use is shared by a print server and when I hit the open button, the default folder that shows me a folder on the server.
View 1 Replies
View Related
May 7, 2012
I use menu's based upon the following snippet:
(if (or (equal choose "1"))(MYFUNCTIONSDEFINITION))
works a treat, its easy for me to understand even if maybe not totally orthadox in method.
So I can populate my code to have multiple selections such as follows.
(if (or (equal choose "1"))(MYfunctionDEFINITION1))(if (or (equal choose "2"))(MYfunctionDEFINITION2))(if (or (equal choose "3"))(MYfunctionDEFINITION3))
and so on, but the example above caters for situations the users enter the values of 1, 2, or 3. If the user enters anything else I get a nil response from AutoCAD. So I devised the following
(if nil (alert "Wrong selection"))
but no response from AutoCAD qua an alert
also tried to be more in uniform with the rest of the lisp and wrote
(if nil (MYalertRESPONSE))(defun MYalertRESPONSE ()(alert "Wrong selection"))
also fails to yield the desired response.
View 5 Replies
View Related
May 16, 2013
Having a rough time with Pipe Networks! I am working an example from the Mastering C3D book (P. 371) as in the following steps:
1.Clicked SS structure(16)
2.Selected Create Alignment from Network on ribbon
3.Selected last structure(18), hit Enter
4.Changed options as needed in Create Align from Network - Create Profile and Profile View check box: Selected
5.Changed options and clicked Create Profile View
At this point the program pauses, then a dialog box trys to partially fill the screen but is all white then fades away as fast as it appeared and I'm stuck with a paperweight that beeps at me everytime I click the mouse, no panning or zooming response at this time. The command line is prompting me for the profile origin. I can switch to other apps and bring up TM and when I attempt to end C3D then it tells me that it can't because waiting for response. I can then cancel the prompt to save the drawing and C3D exits the active command and control is returned.
[URL]
Civil 3D 2013 SP 1, 64 bit
Dell Precision T5600, 16 GB
Win 7 Professional 64 bit
Intel Xeon @ 2.0 GHz
NVIDIA Quadro 4000
View 6 Replies
View Related
Aug 23, 2013
I have a keyboard shortcut for Copy (see directly below). This command doesn't copy multiple. But if I type "Copy" at the comment prompt (AutoCAD 2013) the copy multiple is the default. Copymode is already set to "0".
(DEFUN C:C()
(setvar "SNAPMODE" 1)(COMMAND "_COPY")
(PRIN1)
)
View 4 Replies
View Related
Jan 2, 2009
Is this the same as the profile created by using a color checker card and a script?
If so, where is it stored so I can tell Merge to HDR where to find it?
Is it created by the calibrate DNG add on? I'm guessing I could plug script created numbers into it and have them saved.
If it is none of the above, how do you make one? Or is this above & beyond user ability, materials, electronics, etc.?
View 5 Replies
View Related
Nov 17, 2013
When I try to upload a gallery, I recieve the following error message: An error occurred sending the file: a response was not received in time.How do I correct this?
View 10 Replies
View Related
Jul 18, 2012
I draw images by hand and scan them into photoshop to touch them up with the wacom tablet. Often I'll want to take a piece of the drawing and rotate it, stretch it out, or move it. I select the piece, take the move tool (v) and do what I need to do. I then either press enter and move the piece, or I move it before pressing enter and applying the transformation.
Either way, what often happens is that the piece doesn't deselect, and I can't move it or alter it further in any way. After this happens, I also can't switch between layers, or I can, but what's on the canvas doesn't respond at all. I can still save, and select different tools in the program, but I can't work on anything. Also it might be relevant that I'm working with the frame animation window, and these drawings occupy layers that I'm using as animation frames. Selecting different animation frames also gives no response.
The only thing that works is to save what I'm working on and restart the program. Half the time this problem doesn't occur, but since I'm performing these actions a lot, it really slows me down. Photoshop works fine otherwise it's just this one thing that's bugging me.
My system specs:
Processor: AMD FX(tm)-6100 Six-Core Processor 3.30 GHz
Ram: 8 GB
64 bit operating system
Graphics: AMD Radeon HD 6670
View 4 Replies
View Related
