We are having slow keyboard response while typing in CAD 2010. (It happened a little while using 09 as well). We will start typing a command and our cursor will get ahead of what we're trying to type. Our dynamic input is OFF.
View 3 Replies
When I cut and paste, Autocad lags for up to 30 seconds before continuing to go back to the command prompt. This problem only happens after pasting, whether it is one line or multiple lines/objects. The quantity of data pasted makes no difference to the lag. Also, if it's a new file with nothing in the drawing the issue still happens. The scale list is purged along with the entire drawing, so even on a blank new file it happens?!
I am running autocad 2014 LT and migrated from 2010 recently, where the problem began. I don't have cutting and pasting problems in any other programs like photoshop either, so I have localised it to a cad being the issue.
Also I have tried uninstalling and reinstalling, but this doesn't fix the problem.
I'm running on intel core duo 2, 4gb ram and 64 bit operating windows system.
I have dual monitors . today i tried maximized space on main monitor by placing command line on 2nd screen .
Strangely when i do that , autocad is slowed down . any command has a lag of about a second i usually have adcenter and toolpalettes on 2nd monitor with no problem .
Sometimes when I am in an inventor drawing and I drag one of my views, my computer becomes slow, the cursor starts circling, and I get the (Not Responding) message up top. Why would this be happening?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
without reiterating a lot of what is said in this thread: [URL] ......
This happen outside the potential malware infection?
if you care to not click-through, the problem is that certain commands (not all of them) simply do not disply in the command line. so the MOVE command for example looks like this:
NORMAL:
Command: _move
Select objects:
NOW:
Command:
Select objects:
same with QSAVE and who knows how many others.
I go to mk, connect my clip to a gmask , double click gmask to focus to that module. I switch to 2 viewport. The left is the schematic, the right is the F1 (front). First when i click the F1 viewport, i got no 'add' button for adding gmask. So i have to first go to view pulldown, just do some unecessary click there to refresh. Now after refreshing, i can see my 'add' button is showed up. But the second problem is : i can't immediately press that 'add' button, there's a lag about 5- 7 seconds before i can click that button.
Also i can switch from mk schematic to f1 or f4 quite fast, but sometime go from any of front/back/matte view back to the mk schematic, it will take 4-7 second even for simple/basic mk network/tree.
The problem won't appear when using single viewport.
It's a Q6700, 4GB, 2TB drives, Epson R2880 running Windows 7, 64-bit. CS4 is very peppy, runs great, opens, closes, edits, NO PROBLEM.
UNTIL you decide to print. Once you hit the print selection it takes a MINIMUM of 40 seconds for the CS4 print dialog to appear. If you then hit the "page setup" button, it'll be at LEAST another 30 seconds before that appears. Once they're up, you can navigate around and make changes, but once you hit the print button on the dialog it'll be another 10-15 seconds before it responds and if you specify "Print Preview" it'll be at least another 30 seconds before you get the preview. Once it hits the printer, it prints fine. There haven't been any software or hardware changes in weeks, except the weekly MS updates that get installed.
I've tried large images, and small images in case there was something CS4 was doing. This process is this slow when printing a 4x6 greeting card or a 12 x 18 photograph.
What's interesting is this is a new phenomenon... It worked FINE up until sometime last week. Then suddenly, slow....... Concurrently, the print dialog STOPPED DISPLAYING INK LEVELS. The status monitor still displays them, but the printer dialog no longer does.
I've unloaded the printer and cleaned off every file I could find that appeared to be associated with an Epson print driver. Went to Epson and got the latest, Windows 7, 64-bit set of drivers and status monitor and installed that. No difference. Also tried a new USB cable AND switched it to the other USB port on the printer and on the PC. Nothing's made any difference......
If necessary, I can have her re-install CS4, but is there anything that should be done before we start clobbering major applications, or ever worse, the operating system?
I'm a user of CS5, on a MacPro.
I was so disappointed with the amazing slow response when trying to use the Mixer Brushes; fine when using small files, suitable for web, but when working with larger files intended for large printing, it was painful!! Have the people at Adobe sorted the problem out with CS6?
I used to have my ribbon and commandline next to each other but now whenever I try and put them back next to each other it always ends up with one on top or one on the bottom. I added a picture to try and explain this!
View 1 Replies View RelatedI recently switched from LDD to Civil 3D 2010 and have since had problems with the command line recognizing Alt Codes when entering leader text. After the leader command is finalized, I am able to edit the MTEXT which does recognize the alt codes. I use alt codes for various symbols and now have to edit leader MTEXT each time in order for the symbols to be recognized. Is there a toggle or some other setting in later versions of AutoCAD that would allow recognition of alt codes at the command line?
View 2 Replies View RelatedI've just encountered strange issue and I cannot find the proper solution anywhere.I work in AutoCAD for 5 years and I am used to type commands on the keyboard (I usualy don't use icons in AutoCAD).
I was used to...just cancel all previous commands by ESC key and start typing the command.But since last week I had to click in the command line to write the command in it. How to type commands without annoying clicking in command line?
Every time i open some drawings i have to wait for the command line to to scan some files or something.
It is very similar to this one but it is not solved. [URL] .....
here is what the command line writes every time:
(setq flag nil)
(setq flag1 t)
(if (findfile target)
(progn
(setq wjm1 (open target "r"))
[Code] .....
When drafting either in model space or paperspace, eventually either the command line disappears completely "OR" the command line area increases and prevents me from seeing the tab sheets for accessing paperspace "OR" the mouse arrow gets stuck outside of the drawing area. This is the most non-productive program here after all these years (the worst version ever)
I either have to do one of the following, in order, hopefully to achieve being able to continue to draft;
1. double click the 2D Wireframe in the upper LH corner of the drawing plane.
2. envoke "Task Manager" but then cancel.
3. turn off the Autocad program and start over.
An example is when I'm drawing a box, line etc and attempt to type "@5,-5", AutoCAD somehow jumps to a window on the side and if I don't notice will restore the window I'm working in and not complete the command I typed ("@5,-5" in this case). If I do notice in time, then I have to pres ESC about 3-4 times, which will then have me back on the command line with the text "@5,-" already typed (as if that was were I paused while typing??). The attached picture shows the dialog box on the top left, and the command line as if I've only typed "@", when after pressing ESC as mentioned the full "@5,-" text becomes visible on the command line?
Also, as a note: I've already ruled out that I'm pressing other keys that could possibly cause this...
I'm running AutoCAD (Mechanical) 2011
When I use the distance command and pick the first point the rubber band line doesn't appear and then when I pick the second point I get a distance, but I have no way of knowing exactly where the points I picked landed.
I saw another post about the rubber band being black against the black background, but that is not the problem.
When I turn Otrack on I get the rubber band, but I don't like Otrack on because it causes other problems. How to get the rubber band to work the way it did before?
Is there a way to select a number if not all objects in a drawing and then change the properties (specifically color) from the command line i.e. without a dialog window?
Custom Build with Win7 Pro 64Bit SP1
Gigabyte Tecohnology Co. X79-UD3
3.60 gigahertz Intel Core i7-3820
16GB GSkill Ripjaw Z PC3 2133 PC17000
PCI-E ATI FirePro V7800 2GB 256bit
ATA SanDisk SDSSDX24 SCSI Disk Device (256 GB)
Dell 2001FP and (2) 2407WFPHC Triple monitor setup
Question - Are you the Common Denominator?
I am having an issue with the sheet set manager's tool to insert sheet list table. I have a new sheet set for a new project that was created entirely in Autocad 2012. When I try to insert a new sheet list table, after I click OK in the Sheet list Table dialoge box, it simply closes to an empty command line with nothing inserted. Why nothing is inserted?
View 2 Replies View RelatedI am looking for a way to set a couple options in the Manual Tune window from the Performance Tuning window (3DCONIG Prompt). More specifically I want to be able to:
Check what the setting for Enable hardware acceleration is (so it can be restored back)Set Enable hardware acceleration offReduce the number of tessellations to cacheReduce both the Surfaces, and Curves tessellation How would I do this from command line? My ultimate goal here is to run these commands in .NET.
in CS6 the basic keyboard shortcuts such as Command C,A and V are either slow in working, have to be keyed in twice or are not working and have to be selected from the drop down menu. What's up with this? On a Mac OSX 10.6.8.
View 2 Replies View RelatedI press CTRL+9 to make the Command Line disappear while drawing. When I plot (or when doing a plot preview) , the Command Line appears again by itself. So I always have to turn the Command Line off manually after each plot
The bug still happens;
- if Dynamic Input is turned off or on
- if I plot to a real device or in PDF
- if the Cammand Line Palette i docked or floating.
This is not an issue in AutoCAD 2012 so I guess it has to do with the new way they programmed the revamped Command Line palette in 2013.
Using Windows7
I want to make it so that whenever I type F for FILLET the MULTIPLE option is selected so I don't have to type F then M. Is there a way to make it so that when I type F it always gives me the multiple option without my having to type F then M? How would I do that?
View 9 Replies View RelatedI have keyboard commands set up for exporting my .idw drawings to .pdf format (PD for me.) I would also like to set this up for exporting my drawing to .dxf format. I think this can be done with a macro that can be activated by a keyboard command, but I could be wrong. I don't want to do this with an iLogic.
View 6 Replies View Relatedline command is a multiple command. there is a way to execute it like a single command?
View 4 Replies View RelatedI'm trying to write a formula for my parameters and I do not know how to represent a square root symbol.
View 9 Replies View RelatedA problem i have encountered with LT 2011 is the extend or trim command freezing/taking a long time to extend or trim.
If i zoom up close, extend/trim works as normal instantly, but if i zoom out further & try the same extend/Trim it can take 30 seconds or more.
I dont remember having this issue on previous LT versions, I've found this with many if not all drawings
if I select a line, then enter the move command, the line unselects also when I select a line, then hit delete, the line is still there both of these used to work
2013 Civil 3D
Basically I got a process which is quite long , let's say 30 seconds.
I want put a counter at command line showing to
user how many objects has been processed so far. But I don't want to use New Line Feed to change the line and keep each new number at same line and same location of command line.
I recently installed photoshop CS2 on a new computer and the default keyboard command for the arrows to move anything 1 pix at a time is not functioning, I can not find where in the keyboard command editor is the tab for manually inputing the arrows for pix movement.
View 12 Replies View RelatedIn CS4 I used the keyboard command, command+space bar, to zoom in to a area I selected with the marquee tool. I used this all the time. With CS6 the same keyboard command works differently. I don't have the option to select the area I want with the marquee tool. Is there a way to do it in CS6?
View 2 Replies View RelatedA few weeks ago I had a panel stuck up at the top and I could not get it down and one of viewers gave me a keyboard command to get it down....it is doing it again!!!! but I know how to fix it , but I forgot what the keyboard command was (it is an age thing).
View 1 Replies View RelatedIm looking for the keyboard command to "take a snapshot".
Im trying to take snapshots in capture mode/full screen, without minimizing then clicking the button.
