In CS4 I used the keyboard command, command+space bar, to zoom in to a area I selected with the marquee tool. I used this all the time. With CS6 the same keyboard command works differently. I don't have the option to select the area I want with the marquee tool. Is there a way to do it in CS6?
View 2 RepliesMy keyboard has a zoom key with + and - selections. I use to use this key in drawings to zoom in and out when in the AutoCAD application when we had Windows XP. Now that I have Windows 7 I can't do this. I can't find out how to assign this key on the Microsoft Keyboard interactive software either. I have the other keys assigned as desired.
Can I still use my keyboard zoom key to zoom in and out in drawings? If so, how do I set this up in AutoCAD, or do I need to do this through a Microsoft keyboard application?
When looking at the keyboard shortcuts for MAC, the 100% zoom is down as command alt '0', yet it is showing in the dropdown list as 'n'?
Is there a way of changing the shortcuts. Previously the 100% zoom was simply command (apple) '0', which is now fit to page. how to change the shortcuts?
I've used Photoshop 7 for around a year now, using it mainly to touch up digital photos. I've just upgraded to Photoshop CS, but I've found that I'm having difficulties with my keyboard.
Usually, to zoom in, I can press CTRL + +. However, when I do this, nothing happens. Also, when I make a mistake with the magnetic lasso tool, I can usually press my Delete key to undo the last fixed point. Again, this doesn't work. All that is on on my keyboard is "Number Lock", which just allows me to use the right hand number keypad. Even with this off, the problems still aren't solved.
I have a problem in Illustrator when navigating around the artboard.
By default, if I want to use zoom function I press Alt key and zoom in or out using the mousewheel. When I am satified with the zoom level I release the Alt button and top navigation is activated. See what I mean in the picture below:
Let's say I have the Type Tool activated and I want to access the Selection Tool by using shortcut the V key. Instead of Selection Tool I get the View drop down menu from the top navigation expanded. Then I have to click away or choose the Selection Tool with the mouse.
This has been bugging me for a while now as it slows the work. Also, I have checked the Preferences trying to change the keyboard and mousewheel combination, but I haven't found it.
I recently installed photoshop CS2 on a new computer and the default keyboard command for the arrows to move anything 1 pix at a time is not functioning, I can not find where in the keyboard command editor is the tab for manually inputing the arrows for pix movement.
View 12 Replies View RelatedA few weeks ago I had a panel stuck up at the top and I could not get it down and one of viewers gave me a keyboard command to get it down....it is doing it again!!!! but I know how to fix it , but I forgot what the keyboard command was (it is an age thing).
View 1 Replies View RelatedIn CS3 I could use the keys CTRL ALT ~ to select the lighter areas (luminosity mask). Those keys wont select anything in CS4. Is there a new combibnation?
View 2 Replies View RelatedIs there a keyboard shortcut to zoom the image area to the image size. Kind of like the shortcut ctrl + 0 but the reverse.
View 6 Replies View RelatedIm looking for the keyboard command to "take a snapshot".
Im trying to take snapshots in capture mode/full screen, without minimizing then clicking the button.
I've tried to nail down exactly when and why this happens but have yet to figure it out. Usually happens (but not all the time) when I'm using the path tool and hit command+z to reverse a node I've created, but then the cursor swtiches to the magnifying glass/zoom tool.
View 3 Replies View RelatedI want to make it so that whenever I type F for FILLET the MULTIPLE option is selected so I don't have to type F then M. Is there a way to make it so that when I type F it always gives me the multiple option without my having to type F then M? How would I do that?
View 9 Replies View RelatedI have keyboard commands set up for exporting my .idw drawings to .pdf format (PD for me.) I would also like to set this up for exporting my drawing to .dxf format. I think this can be done with a macro that can be activated by a keyboard command, but I could be wrong. I don't want to do this with an iLogic.
View 6 Replies View RelatedThere must be some keyboard command to duplicate a graphic style since I seem to do that often unintentionally. What is the command, and can I turn it off? CS 5.5, Mac, OSX 10.8.2.
View 14 Replies View RelatedI have a portion of my routine below. Basically I need the user to continue to loop through the command. They are picking Circles or blocks in the drawing and I get the insertion point, then insert a new block. However, whenever they try and use a transparent zoom or pan to move around the drawing when the promptentityresult is hit, it zooms back to the original location.
Here is a code....
<
CommandMethod("getpnt", CommandFlags.Session)> _
Sub findpnt()
Dim cnt AsInteger = 0
Dim NEWPNT AsPoint3d = GetInsPoint()
While cnt < 3
[Code] .......
My lot top mouse is not working no more with the zoom in and out command. I dont have and external mouse other than the one is install from factory on my lot top comp. It was working perfect, but i think i click something by mistake. I only learn enough to draw in cad but when it comes up to problems like this i do not know what to do. I was trying to copy a table with chairs from and other file and when i pasted to my drawing something happen so my mouse is not zooming in or out in my drawing .
View 5 Replies View RelatedWe are having slow keyboard response while typing in CAD 2010. (It happened a little while using 09 as well). We will start typing a command and our cursor will get ahead of what we're trying to type. Our dynamic input is OFF.
View 3 Replies View RelatedI'm trying to write a formula for my parameters and I do not know how to represent a square root symbol.
View 9 Replies View RelatedWhy we don’t have the command “zoom to layer” in the AutoCAD?
In particular cases, we need to zoom to certain layer. Is this possible in the AutoCAD? In the ArcGIS we do have this tool.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
when i work on geometry which is not in orthographic orientation i always prefer to create orthographic view of this, that's what i do :
Command : ucs
Command : z
Command : (selecting representative angled 2 points)
Command : plan
Command : c
than the whole zoom is lost , and i need to find again the portion , and save a view. i want to automate this process but before i automate it i want to know if there is a way to avoid zoom lost after executing the (plan) command?
This happens with a number of drawings, I believe all the files are very large approximately 8mb+. The issue is that by using the REGEN or the Zoom - Dynamic command, it will freeze AutoCAD. I will have to conduct a force shutdown than restart the program.
My question is; where do I start to determine what is the cause? Where do I find an error log?
Command and spacebar has always allowed me to draw a marquee around what i wanted to zoom. not now? what am i doing wrong in inDesign6?
View 5 Replies View Relatedis there a way to not include zoom features in the undo command.
for instance, if i delete something and than zoom out, i have to undo multiple times to complete the undo delete.
I want to completely eliminate zoom featues from the undo command.
I loaded 2013 Civil 3D and I customized my Ribbon with Zoom Commands I use frequently; everything looked fine...I changed the Workspace to Planning & Analysis and cutomized my Ribbon to include the Zoom Commands but a Button Icon for ZOOM_TO_POINT came up with a cloud & question mark. I went to look for the Icon Image & I don't see it. I made the mistake of changing the Icon to another hoping I could change it back but it's not there. I went to the 2012 verison & the Button Icon is there...first icon listed. Where are the icons in 2012 so I can drag & drop image into 2013?
The icon has a point symbol with a magnifying glass. I've checked other computers and the same thing. Can't find the Image Icon for ZOOM_TO_POINT. It shows up when you load the software but if you want to edit it...it's not there in the CUI Button Icons.
On some computers with AutoCAD 2013 SP2, pan and zoom launched with the middle mouse button is significantly slower than pan and zoom performed by launching the PAN or ZOOM command on the command line.
View 7 Replies View RelatedI use Photoshop CS2 to create Designs for webpages. These designs have pixel-exact elements, e.g. a 1-pixel-line from top to bottom.
Now when I zoom in (>100, then I have sort of anti-alias, so that the 1-pixel-line isn't only one blue anymore, but it has different blue tones. I guess for photo manipulations etc. this anti-aliasing zoom is great, but for webdesign it sucks because I don't know if only the zoom make the line "corrupt" or if it really is corrupt.
Is there a way to change this zoom?
recently my zoom tool changed from default zoom in + to zoom out -
View 1 Replies View RelatedThe AutoCAD doesn’t show the “intersect osnap” at certain zoom!
The “intersection osnap” between a “hatched rectangle” and a “DASHDOT2” line appears and disappears depending on the amount of zoom!
As I zoom out the “intersection osnap” appears but when I zoom in, it disappears
Why the "intersection Osnap" should disappear as I zoom in?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I am working on getting some settings done, moving from 2008 to 2012. How do you set the Middle Mouse Button (wheel) to either Zoom All or Zoom Extents when you double click it? I thought it was set in the Main CUI file.
View 9 Replies View RelatedI am having problems with zoom, pan and rotate at high zoom level. The movements becoming jerky and delayed. But for whatever reason the problem exists in some assembly files and not in the others.
View 9 Replies View RelatedI can't find in new max (2013) settings for zoom. I want to set Zoom about mouse pointer and adjust a bit zoom speed (now it is too much for one mouse wheel step).
I can't find zoom settings in 3ds max 2013. Where they are? I think that in previous max it was in Customize -> Viewports tab. But now it is not there.