A few weeks ago I had a panel stuck up at the top and I could not get it down and one of viewers gave me a keyboard command to get it down....it is doing it again!!!! but I know how to fix it , but I forgot what the keyboard command was (it is an age thing).
View 1 RepliesThere's a color wheel panel for Photoshop named Magic Picker that sits in the Window -> Extensions -> Magic Picker menu. Is there a way to assign it a keyboard shortcut? I found no way to do it in the Edit -> Keyboard Shortcuts.
View 6 Replies View RelatedI would like to assign keyboard shortcuts for functions inside the paragraph styles panel in PS CS6. It seems that no option to do this is exposed - is this correct?
View 3 Replies View RelatedI recently installed photoshop CS2 on a new computer and the default keyboard command for the arrows to move anything 1 pix at a time is not functioning, I can not find where in the keyboard command editor is the tab for manually inputing the arrows for pix movement.
View 12 Replies View RelatedIn CS4 I used the keyboard command, command+space bar, to zoom in to a area I selected with the marquee tool. I used this all the time. With CS6 the same keyboard command works differently. I don't have the option to select the area I want with the marquee tool. Is there a way to do it in CS6?
View 2 Replies View RelatedIn CS3 I could use the keys CTRL ALT ~ to select the lighter areas (luminosity mask). Those keys wont select anything in CS4. Is there a new combibnation?
View 2 Replies View RelatedIm looking for the keyboard command to "take a snapshot".
Im trying to take snapshots in capture mode/full screen, without minimizing then clicking the button.
My workstation at work has two monitors and my laptop is docked. I have all of my toolbars open on the second screen so that I maximize my workspace. When I go home to work, however, I work directly on my laptop. When I do this, I lose my Command Panel and can't bring it back. I've tried resetting the UI, as well as checking/unchecking the "command panel" under "customize". When I leave today, I will replace everything on the main screen and make sure that I check the option to save my UI when I close out. BUT - there certainly must be a way to find your command panel or other toolbars if they get lost on your phantom monitor?
View 3 Replies View RelatedI minimized then maximized Max and the panel was gone. hid and revealed in the roll-up...no go. Restarted...nopeLoaderd a maxstart file from Max 2011...no 32 bit Windows XP sp2 i7 Quadro 3500 4 gigs
View 3 Replies View RelatedI want to make it so that whenever I type F for FILLET the MULTIPLE option is selected so I don't have to type F then M. Is there a way to make it so that when I type F it always gives me the multiple option without my having to type F then M? How would I do that?
View 9 Replies View RelatedI have keyboard commands set up for exporting my .idw drawings to .pdf format (PD for me.) I would also like to set this up for exporting my drawing to .dxf format. I think this can be done with a macro that can be activated by a keyboard command, but I could be wrong. I don't want to do this with an iLogic.
View 6 Replies View RelatedThere must be some keyboard command to duplicate a graphic style since I seem to do that often unintentionally. What is the command, and can I turn it off? CS 5.5, Mac, OSX 10.8.2.
View 14 Replies View RelatedWe are having slow keyboard response while typing in CAD 2010. (It happened a little while using 09 as well). We will start typing a command and our cursor will get ahead of what we're trying to type. Our dynamic input is OFF.
View 3 Replies View RelatedI'm trying to write a formula for my parameters and I do not know how to represent a square root symbol.
View 9 Replies View Relatedhow to increase width on command panel by column?
here you can see an image of what im talking about:
[URL]
and here is a example from a video where shows that it is possible to do it:
[URL]
When I click the Force command in the LOADS panel when doing a Frame Analysis, I don't get a dialog box. All I get is a select origin box with an arrow. There is no way to change the Magnitude value or the Angle of Plane as per instructions in the tutorial. I have tried numerous ways to get a dialog box to appear, but I can't find out how. why I am not getting a Dialog box?
View 1 Replies View RelatedWhat's the best way to change the primary command on a ribbon panel? I want to set Pline as the primary command on the draw panel as it is currently line. I've managed to get it to work (sort off) but shouldn't it as simple as right click "set as primary command"?
View 4 Replies View RelatedI am developing Addin for inventor in C#.
I have added single panel in my new ribbon tab. This panel contains a single button.
When user clicks this button then a dockable window is invoked.
Now I want to insert 'Exit' Panel(and "Finish" button in it) to kill the above dockable window.
e.g. If we switch on sketch mode then to exit from this mode the 'Finish' button is there in all tabs of ribbon
(As shown in below image)
I want to use this behaviour in my addin.
Is there any API to add this 'Exit' panel to terminate from any button command or do we need to add it ourselves?
Is there a command / system variable to set all buttons on every panel in the ribbon to have a button style of "smallwithouttext". I wiould like to do this without having to adjust each button manually
View 3 Replies View RelatedIs there a reason why I can not open the actions panel from the timeline when I have the code panel docked and open in application frame? If I close the code panel I can view the actions panel. Why can't I have both open?
View 1 Replies View Relatedlost basic panel from righthand side adjustable panel, how can i restore it? There are everything else but basic ones.
View 1 Replies View RelatedFrom the Brush Presets Panel, I choose Basic Brushes from the drop down menu. Then Replace. The new choice of brushes appear in the Brush Panel and in the Brush Presets Panel.
But in the Brush Panel, additional brushes appear.
There are always more brushes in the Brush Panel than the Brush Presets Panel whenever I Replace. The Brushes Preset Manager is populated with identical brushes as the Brush Presets Panel. What determines the additional brushes that appear in the Brush Panel?
I have CS5. The bugs and broken features in AICS6, make it unusable in my workflow.
I am specifically concerned about the inability to drag global color swatches from the color panel to Gradient stops in the Gradient Panel. I use this method to update a gradient color because I find it MUCH faster than option-dragging to duplicate a stop color, then deleting the unused stop. Since I do this constantly, I find using CS6 very tedious.
AutoCad 2011. I am having no luck when trying to drag a command from the Command List pane to the Quick Access Toolbar. I have success draging to Tool Palettes
View 1 Replies View RelatedI am currently writing a series of routines for setting the layers for text, leaders and dimension commands. The end goal is a system where any annotation command sets the correct layer for the duration of the command, then reverts back to the layer that was active before the command.
I have managed to complete all the code, and it appears to be working fine, I just have one question: I have used -layer "m" "Lay_name" etc... for all layer setting commands, rather than any code to see if the layer exists already. In my limited testing this seems to be suitable, nothing that exists on that layer seems to be affected.
I know how to write code to determine if the layer exists already and set the layer instead, but so far it seems unnecessary??
After installing the VBA Module, I get the message "Unknown command "VBARUN"". I've rebooted, restarted and tried reinstalling the VBA Module to no avail.
View 4 Replies View RelatedI used send command for Export Layout..But the line only executes after exiting command method.
View 9 Replies View RelatedI press CTRL+9 to make the Command Line disappear while drawing. When I plot (or when doing a plot preview) , the Command Line appears again by itself. So I always have to turn the Command Line off manually after each plot
The bug still happens;
- if Dynamic Input is turned off or on
- if I plot to a real device or in PDF
- if the Cammand Line Palette i docked or floating.
This is not an issue in AutoCAD 2012 so I guess it has to do with the new way they programmed the revamped Command Line palette in 2013.
Using Windows7
I need to save a drawing file and give it the name of my desire using a single command, I don't want to issue "saveas" and then specify the name in the file name prompt. This problem is has been faced when I was using ScriptPro and I couldn't succeeded to do that. Hence I need to know if it is feasible to do the stuff using a single command. It will be preferred if I can choose the location to save the file also rather than save the file to the default location.
View 2 Replies View Relatedwithout reiterating a lot of what is said in this thread: [URL] ......
This happen outside the potential malware infection?
if you care to not click-through, the problem is that certain commands (not all of them) simply do not disply in the command line. so the MOVE command for example looks like this:
NORMAL:
Command: _move
Select objects:
NOW:
Command:
Select objects:
same with QSAVE and who knows how many others.
line command is a multiple command. there is a way to execute it like a single command?
View 4 Replies View Related