I have dual monitors . today i tried maximized space on main monitor by placing command line on 2nd screen .
Strangely when i do that , autocad is slowed down . any command has a lag of about a second i usually have adcenter and toolpalettes on 2nd monitor with no problem .
We are having slow keyboard response while typing in CAD 2010. (It happened a little while using 09 as well). We will start typing a command and our cursor will get ahead of what we're trying to type. Our dynamic input is OFF.
View 3 Replies View RelatedI installed AutoCAD on a brand new Lenovo W530 with 2 graphic cards: Integrated Intel and Nvida K2000M. When I just work on the built in screen AutoCAD does not seem to work well, the mouse movement lags. The problem is gone immediately when I simply extend my desktop onto an external screen.. That is all I do : FN key + projector icon, choose extend desktop and enter -> AutoCAD works great.
Here is some background info / things I have tried:
1) I disabled Nvidia Optimus in BIOS to makre sure all graphics is on the Nvidia (i.e. disable integrated graphics) -> this did not solve the problem, also after applying the extend desktop trick
2) In the Nvidia 3d settings I made sure that AutoCAD works with the Nvidia card.
3) Nvidia drivers are upto date
4) When I open AutoCAD it appears in the nvida window (in the taskbar) that shows which programs are used by nvidia
5) After extending the desktop I stay with AutoCAD on the builtin screen
I'm using two monitors with LR5, and the second monitor is the preview screen. I find the preview on the second monitor to be painfully slow in both the Library and Develop modules:
1) If I am the Develop module, and I move to the next photo, and zoom the preview to 100% (or if it is already at 100%), it take a minute, literally, for the preview to display correctly.
2) In the Develop module, sometimes the display does not update correctly at all. If I adjust a slider on the Details tab, however slightly, the preview then updates almost immediately.
3) In the Library module, if I switch the main window to single photo view, and view 100%, then, as I browse the photos, the main window updates very quickly, but the preview window lags behind.
I'm working with Fuji X-Trans RAF files, and this maybe this si the issue? JPGs update almost immediately in the preview window in both modules.
I press CTRL+9 to make the Command Line disappear while drawing. When I plot (or when doing a plot preview) , the Command Line appears again by itself. So I always have to turn the Command Line off manually after each plot
The bug still happens;
- if Dynamic Input is turned off or on
- if I plot to a real device or in PDF
- if the Cammand Line Palette i docked or floating.
This is not an issue in AutoCAD 2012 so I guess it has to do with the new way they programmed the revamped Command Line palette in 2013.
Using Windows7
without reiterating a lot of what is said in this thread: [URL] ......
This happen outside the potential malware infection?
if you care to not click-through, the problem is that certain commands (not all of them) simply do not disply in the command line. so the MOVE command for example looks like this:
NORMAL:
Command: _move
Select objects:
NOW:
Command:
Select objects:
same with QSAVE and who knows how many others.
line command is a multiple command. there is a way to execute it like a single command?
View 4 Replies View RelatedA problem i have encountered with LT 2011 is the extend or trim command freezing/taking a long time to extend or trim.
If i zoom up close, extend/trim works as normal instantly, but if i zoom out further & try the same extend/Trim it can take 30 seconds or more.
I dont remember having this issue on previous LT versions, I've found this with many if not all drawings
if I select a line, then enter the move command, the line unselects also when I select a line, then hit delete, the line is still there both of these used to work
2013 Civil 3D
Basically I got a process which is quite long , let's say 30 seconds.
I want put a counter at command line showing to
user how many objects has been processed so far. But I don't want to use New Line Feed to change the line and keep each new number at same line and same location of command line.
I've been searching for a command that could actually cut lines for purpose. For example, if I'm drawing a 2 line crossed, wish I could cut the 2 lines so they are now 4 segments. On a circle, I could actually draw a line that pass trough the circle on cut it off the way I wish. Does such command exists for autoCAD? Very often, I've many lines at the same time that I wish I could cut with a single one. The problem is that I don't wish to trim 'em and extend (losing time and long process). Sure there is also the div cmd, but this isn't what I'm seeking for.
View 7 Replies View RelatedI had a problem this morning where for some reason I needed to do a drawing recovery on a map - which is fine, all seems well.
The problem is that now when I type a command, it doesn't appear next to the cursor anymore. It's not really a NEED having it there, but I've gotten to like that in the newer CAD versions, and now I can't find the setting that makes it come back. Sure I CAN type everything and have it show just at the bottom of the screen, but I'd rather have my dynamic field back.
How I can restore it?
This is the problem I have. When I type something, ie a line length or a command, ie purge, whatever it is I type it is not shown in the command line... what am I doing wrong or what setting do I need to change..
View 3 Replies View RelatedCommand line for Dimension Fit
View 1 Replies View Relatedmy command box has mysteriously vanished (more than likely my own doing) and I would really like it back!
View 3 Replies View RelatedFrom my .NET dll I need to get the command line parameters that were used when AutoCAD was launched.
In the unmanaged world I used acedGetAcadWinApp.
Is there a .NET equivalent?
I am writing a API in .NET. I can send commands to the AutoCAd command line using the sendCommand feature but can i access the result returned too? I am not able to find the right class/function the redirect the command result back to my API
View 3 Replies View RelatedI have a problem and as this has happened the first time I fire up autoCAD I can see that I am not going to have as easy a time as I did with 3D studio Max.
I found a tutorial on line, and it was talking about the command line, so i was entering points like it said, fine. I had to put it down as something came up at work. Go back to it to play some more, now I can no longer specify points in the command line, pressing space or enter just clears everything and asks to specify a point again.
What have I don't to make this happen, or is it a bug in the program. I have tried restarting again but still no.
I can't see that I changed any setting (never do) or did anything to make it so the instruction line under the Command: window at the bottom of the screen now expects me to enter text, i.e. In the Command Window we have "open", after I clicked on File / Open, but instead of being taken to the usual drop down of my hard drive the bottom line on my monitor reads, "Enter name of drawing to open <.>: The same thing happens if I try to save a drawing. This is making it extremely difficult to open and save, i.e. to work....
View 1 Replies View RelatedI recently started using v2012 after some time using 2006 2008. I frequently would use the ED command to add text to a dim line but it appears 2012 uses a different command for this.
View 6 Replies View RelatedI would like to calabrate a tablet when i type cal i get this
View 9 Replies View RelatedI've been trying to draw without the command line visible and am liking it. Have been using F2 if I need it while in a command but am finding the text window a bit obtrusive. It also gets hidden when you click in the drawing area.
Is there a way to activate the command line transparently? If you are in a command, Ctrl+9 cancels it.
I was going through some exercises in an ACAD book and floating my command line, etc. and now I can't get it back to it's original place. Or at least when I do it's covers everything there.How do I get it back to normal?
View 9 Replies View RelatedFor some reason I cannot get the ATTDEF Dialoge box to stop appearing and get the command line prompts. I have all the system variables set correctly -
FILEDIA = 0
ATTDIA = 0
CMDDIA = 0
The ATTDIA should surpress the diaolog box and give me prompts but it does not.
I know how to add to the layer keys, and it seems to me that you can add a layerkey via the command line. Is this accurate or just wishfull thinking?
View 1 Replies View RelatedHow do you pause the program to run a command line. Ex. MyDrawing.SendStringToExecute("command", True, False, False). I want to regen the drawing after the command. I am using Autocad 2011.
View 3 Replies View RelatedIn VB.net when I send a command to the command line, how can suppress the command line echo?
Is there better ways of sending commands to acad?
acaddoc.SendCommand(
"-STYLE" & vbCr & "SCHNormal" & vbCr & "romans.shx" & vbCr & SCHNormalH + 2 & vbCr & ".8" & vbCr & "0" & vbCr & "No" & vbCr & "No" & vbCr & "No" & vbCr)
How does one programmatically set the command line to have keyboard focus?
I'm programmatically setting an active/focused PaletteSet's visibility to false.
_paletteSet.Visible = false;
I would like to follow this line with code that sets the command line to receive focus.
The PaletteSet for other reasons has KeepFocus = true.
I've tried various Win32 APIs (SwitchToThisWindow, SetForegroundWindow, SetActiveWindow) to no avail. I also tried SendCommand() and SendStringToExecute(activate=true,..) , etc.
I imagine there's a way to do this with the native APIs.
I used to have my ribbon and commandline next to each other but now whenever I try and put them back next to each other it always ends up with one on top or one on the bottom. I added a picture to try and explain this!
View 1 Replies View RelatedI turned off the command line because I don't use it or need it on my screen. But each time after I do a plot preview the stupid thing automatically turns itself back on.
Is there a way to permanently turn this thing off because apparently hitting the "x" on the toolbar isn't working correctly.
Also, why did they do away with the flyout option on the commandline. At least then I could dock it somewhere and collapse it.
As an Autocad user since Rel. 2.1. My favorite is when attempts to draw a line using feet and inch input while units are set to decimal. How "Point or option keyword required" is supposed to guide using the correct units setting? With DYN Input on, the red outline offers even less information. Are the prompts user editable?
View 4 Replies View Related